Not knowing any more than what you've said, an 8 year old tv is bound to have problems. LCD televisions just don't last the same as CRTs used to. If you feel the need to repair, a past/known issue is a great start. Still, you might rethink repair and get a new tv.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
Please help,I have a panasonic lcd tv model-TX-32LXD1 8yrs old.I left it on standby with red light on,I switched the tv on by the power switch the red light went out but thier was no click like when i
Not knowing any more than what you've said, an 8 year old tv is bound to have problems. LCD televisions just don't last the same as CRTs used to. If you feel the need to repair, a past/known issue is a great start. Still, you might rethink repair and ...
Flat Panel Televisions
Its plugged in the red light is on but when I push power the light blinks blue but then switches back to red it clicks like it wants to turn on but it doesn't I don't know what to do it has done this before but it turned on after a few days now it won't turn on anymore.
This is a protection circuit that prevents the tv from coming on (to stop damage of the components) ....you need to check your voltages off the power supply and make sure they all read well (EX: 24v12v5v etc). Also look for popped capacitors th ...
Proscan 37LC30S60 TV
Vpw 425 viewsonic, have owned this Plasma, for several years, has always operated fine. Today it won't turn on. Main power switch is on. Standby switch is red. When I push the standby power button, it changes from red to green, I hear a click, then within 2-3 seconds the standby light turns back to red. I removed the back panel and tried to start again, after several tries there is a red indicator light (inside the panel) labeled "main power" that comes on and stays on.
ViewSonic VPW425 42 in. Plasma HDTV
LG 47LG50 dead....no red light, no blue light, no green light. It made a CLICK sound and went dead. Power Supply?
May be power supply need more information ...
LG 47LG50 47 in. LCD HDTV
Hi, I have Sony Bravia KLV-32S400A Couple of months ago suddenly get switch off after I switch on standby light(Red) gets blink. I unplug the power code and switch on the LCD after 3 hours it works fine. I happens occasionally. Couple of days ago I'm unable to power on the LCD. When I plug the power code I can here a sound like cutout gets on off (tick tick) nothing happens no indicating lights, no display and no sound. Please help me to solve this problem
Dear User,in your case there is a supply fault..capacitor of power board is weak .kindly change the capacitor ..the sign of capacitor faulty is that capacitor is blow up like oil is coming out form upper side..kindly do the need ful.dnt ...
Sony Flat Panel Televisions
Model:Philips 42PF9965 Plasma
At switch on the green light comes on for a few seconds,then it goes off and the red light starts flshing.After several attempts the tv may come on live and stay on until you switch off.The two relays on the power supply board heard to be clicking on and off during the time the red light is flashing
You might have some swollen capacitors on your power supply board. They will be easy to spot out, because they will not have flat tops like the rest of the capacitors. Replace them with the same rating cap ...
Philips 42FD9954 42 in. Plasma HDTV
MY SONY TV LCD MODEL KF-50WE620 screen went blank.
When I turn on the green light it blinks on 40-46 times every second, then turn to red color to Stand mode and blinks for 160 times, then move to power off (red light).
This TV has been OK for awhile until TELUS OPTIK HDTV (box) device was connected, shortly after 2 days I heard a loud single sound like a sound of a smoke alarm, just once, "squeeek". Then the TV Screen went blank. The other device from TELUS is still on.
There is no reply from the jungle IC301 (data bus is busy, shorted to ground, or held high), IK video path is defective. \015\012\015\012 Might check fuse, R607, Q601, IC601, R612 and VDR601 (should show open).\015\012\015\012 ...
Flat Panel Televisions
I have just re-installed my pdp5071 after it being in storage for a few years.. the unit will not power up . at plug-in several clicks at upper left rear of unit ( click - stand by red light on-off, pause then click blue power light on, click blue power light out, pause click, click ) unit then is dead .. i have tried the unplug reset operation several hundered times same result. i have tried the mechanical power button a few hunderd times - randomely at plug-in i get a single click and red stan
There are two power buttons on this TV. One on the lower left front and one on the right side. make sure they are both on. During storage it may have deactivated both of them. ...
Pioneer PDP-5071HD 50 in. Plasma HDTV
Hi! for the past few weeks our samsun BN-68-01024E tv makes a clicking sound when we switch it on, the red light power light on the tv flashes and it takes up 15mins for the tv to eventually come on. the past couple of days the tv still makes a clicking sound and eventually a no- signal sign comes up. Please can someone help!!!
Hi rajbum88,\012\012This is an indication of out-of-regulation in the power supply section. The very\012common caused of this fault is the leaky\012electrolytic capacitor ...
Samsung LN40B530 40 in. LCD HDTV
Lg 42lh30 Tv runs well for awhile 20 minutes to an hour, then a click sound comes out of just the right speaker. Then the TV freezes and none of the buttons work on the TV. Once I cycle the main power switch the tv will not turn back on, thought a red light shows that power is available. I did some minor troubleshooting and found when I disconnect the T-Con from the main board, I do not ever get the clicking sound, my buttons always remain functional, and the TV seems to run fine (I can hear the
As per your detailed description, the fault should be of its T'Con itself. Replace it. There is no adjustments to be done after T'Con replacement. If you wish to get more details about how to replace T'Con board to an LCD TV, check the site linked ...
Flat Panel Televisions
I recently purchased a used Pioneer Pro150FD and was told it worked. Now that I have plugged it in, I get a clicking that the power is on, but there is nothing coming on the screen. I also see a small red light illuminating from within (through the back panel) when the power is switched on.
I am using a "osiris" remote that came with it and the control says "PIONR" but the switch doesno't work. I have installed new batteries in the remote.
Pioneer PRO-150FD 60 in. HDTV-Ready Plasma TV
Mitsubishi 72 inch TV quit working. We turned it on, the picture came on, it made a loud pop and the screen went black. We disconnected it from the power or a couple of minutes. When we turned it back on it makes a scratching sound, you can hear something that sound like a motor slowing down. It does that about 4 times and the red light lights up.
I have a Panasonic Viera TH-42PZ77U, when I try to power it up it wll click as if it was going start and about 2 sec. later it ckicks again and the red light by the power switch flashes
Something inside has failed.\015\012\015\012The flashing is a code for the repair engineer to tell him/her what is wrong.\015\012\015\012\015\012---\015\012\015\012Please dont forget to vote if you liked my answer ...
Panasonic Viera TH-42PZ80U Plasma TV
Went to turn on tv and made high pitch noise like a jet engine. Made this noise a couple times and heard a fan kick on then power went off and red light came on.
Colorwheel eeds replacement most likley it could also be a fan but I would assume its the colorwheel especially if it was real highpitched sort of squealing sound. You can get the colorwheel and free tech assistance from the guys over at ...
Mitsubishi WD-65733 65" HDTV
Hello, i have the sony flat panel display, model fwd-50px2, and as somebody says, when i plug it, red power light come on, i push it to turn on and the green light come on, makes a click and sounds like doing something but no image on the screen, it stays black, i think could be a board, because the fans don't work either, so, i writting you to ask which board i need to get, or what do you think the problem is, i really appreciate your help. Thankyou so much.
Sony FWD50PX2/S 50 in. Plasma Television
I have an old Toshiba CF27E50 chassis no. TAC 9515 that has had no problems until last week. I went to turn on the power and the red light flashes continuously, but the set does not turn on. I have unpluged the set for an hour and tried to turn it on again, but the same thing happens. I have tried to turn it on using a universal remote and using the power switch on the front of the set. Can this be fixed or not?
This is a protection circuit that prevents the tv from coming on (to stop damage of the components) ....you need to check your voltages off the power supply and make sure they all read well (EX: 2 ...
Toshiba 27A44 27" TV
My Samsung le40s71bx Flatscreen LCD tv, will not switch on.
When i connect power cord, led flashes a few times, then the light in the screen switches on, for about 5 seconds. This continues forever,.. i have left the tv like this for 6 hours. it does not make any loud clicking noises .
Flat Panel Televisions
Have an hp cptoh-0602 loud pop screen went black would not power up found a fuse burned out not sure what board it came off of, replace and set will still not turn on red light stays on it will click once when initially plugged in then it just stays red. no sound that i can hear
HP PL4260N 42 in. Plasma HDTV
Hi I have a 50pf9630a /37 plasma tv and last night the screen went out, it's blinking 5 red blinks, when I turn it on, power supply green lights go on, mother board lights up, I hear 2 relay click
Philips 50PF9630A 50 in. Plasma Television
Hi I have a TH50PZ80U that is flashing two red lights when I plug it in. If i press the power button for 5 seconeds it will flash 10 times.
When applying power the AC relays click, after pressing the power button the fans turn on and the optical audio port is red. It will stay 'on' for 3 seconds and then the relays will click on turn off.
No red optical light.
If I test the P25 connector pin 1 voltage it will go to 15 Volts for about a seconed and then 0. This is only achieved by plugg
I'm 100% confident that a D-board replacement will fix this issue. I've worked on 8 of these and a D-board replacement fixed the issue you are having now. I had all the same problems with them but it is all related to the D-board (from previous exper ...
Flat Panel Televisions
I Have A .AWA MHDV2411-03 When I Turn On The Mains Power Switch On The Tv - To On . The Red Stanby Led Lights Up As Normal Then I'll Press The Power Button On The Remote The Standby Led Lights Changes From Red To Green As Normal And The Tv Works Fine.When I Switch The Tv Off From The Remote Or The Mains Switch The Tv Switches Off As Normal. Now When I Go To Turn It Back On Again The Green Led Is On All The Time And The Tv Wont Work . When I Leave The Tv Switched Off And Disconected For Sev
Standard (CRT) Televisions
My panasonic th-42pwd8uk tv wont power on. When I press power it clicks to turn on then clicks again and the screen never shows up. No red lights no blinking lights just a solid green light.
Check the capacitors and replace the power components. It is an easy fix if handy with soldering electronics. Tv Repairman may charge less than $100.00 bucks to fix it !Good luck ...
Panasonic TH-42PWD8UK 42 in. EDTV-Ready Plasma Television
CF35F50 SET WILL NOT POWERUP, IT WILL CLICK AND THE RED POWER LIGHT COMES ON WHEN YOU TRY TO POWER IT UP, ALSO HAS 15
Toshiba CF35F50 TV
I have a Sony Wega KDF-E55A20 rear projection LCD TV. The screen stays black when pressing the Power On button. When the Power on button is pressed, a GREEN blinking light (5th light in a row of 5) comes on and blinks about 58 times, along with an intermittent "popping static" noise. It then goes to a STEADY RED accompanied by the 2nd light in the row of 5, BLINKING RED. It continues like this until I unplug the power cord. It will do the same thing if I plug it back in an press the Power On but
It sounds that the SCL ' SDA signal path has some short. You must have thorough knowledge in electronics to follow. Checking I2C bus signals is a skilled work. If you wish to get more details, ...
I have a Hitachi 42 inch rear projection TV. The other day, the color went almost like it looked 3D and then the screen just shut off and the power light on the front just blinks red.
Look for the model number (43fdx01B etc) and from description I suspect maybe the convergence chips----confirm to me actual model number and I can tell you how to proceed. ...