Having problems with your Flat Panel Televisions ?

I have a Rca 26LA33RQ upon initial use screen backlights bright white slowly fadeing to black. I do not know that the speakers work because I have not connect cable to it. I feel as if this could be the T-Con board. Or a low voltage production on my inverter board. I can find almost no information on this unit I repair al types of electronics being Navy trained leads me to try and find a publication to use but for this unit there is none. I am not even sure where the t con is on this one. There

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Rca 26LA33RQ upon initial use screen backlights bright white slowly fadeing to black. I do not know that the speakers work because I have not connect cable to it. I feel as if this could be the T-Con board. Or a low voltage production on my inverter board. I can find almost no information on this unit I repair al types of electronics being Navy trained leads me to try and find a publication to use but for this unit there is none. I am not even sure where the t con is on this one. There

... Flat Panel Televisions

I got a Sony Bravia KDL-40WL135. Blank screen. There's two LED lights: red standby and green power light. When I turn on the TV, green led comes on, then after about 30 seconds red led blinks once, then green resumes. The green led stays solid. I think that's a SONY error code, I tried to look it up but can't find anything useful. I have replaced the power supply, AU board, backlight inverter, logical board, and the second power supply board. Any suggestions? I haven't checked the t-con bo

Http://www.smpcshop.com/KDL-40WL135-KDL-46WL135-p-8895.html\015\012\015\012\015\012\015\012Above is a link for a service manual.\015\012 ... Flat Panel Televisions

Read that this is a common problem...I have a VS-60111....when i turn it on it clicks then goes right back off....I used to manage a service department for a place called Conns. Sell appliance and electronics....well one of the techs i used to manage came , looked inside then immediately said convergenc ic's. well i actually read upon it too the main board out was gonna change them but got scared off the saudering part...long story short, rought board to him he saudered two new ic's i just

You cannot be sure of the problem unless you try the error code operational check. Here are the instructions for doing itTurn off the tv from the remote and unplug it. Plug it back in . Press and hold the menu and Device/Input buttons on the fr ... Mitsubishi VS-60111 60" Rear Projection Television

I have a Samsung LN-s2651d LCD tv that black screened on me and I don't know if the sound works because I have the internal speakers turned off... I use 5.1. I have been told that it is the t-con board and would like to know if there was any way to determine this with some certainty before I go buy the part. Or, could it be something else besides the t-con board?

... Samsung LN-S2651D 26 in. LCD Television

This unit is practically brand new, has no dust nor dings nor damage on the unit anywhere, not even a scratch, but I haven't been able to get the unit to power on. Power cord is connected. The switch on the unit sounds like the others when pressed and everything looks and smells good inside and out! There are no cracks on the circuit boards, no broken wiring no broken or missing or out of place connectors. The fuse is also intact and appears good, but I haven't used a meter yet to check for

Hi jesseley,\015\012\015\012Do it has a led light when you plug the unit to the outlet, make sure that the outlet is live, what happen when you pressed the power on switch in the front panel?\015\012\015\012Jdvillanueva ... Flat Panel Televisions

Started out as no pic but still had sound - expert told me to replace z sus board which i purchased and did! now there is no pic and it makes a popping sound when turning it on to test it! Took tv to repair shop and now they are saying y sus board no good and poss z sus no good also! This unit has maybe been used a total of two years since purchase. Can you help clarify which board? Or verify if it would be 2 boards?

The y and z sustainer are always suggested to be replaced at the sametime as they work together to power the frontlight to the screen. sounds like the z board you got my be faulty with the popping noises, try to distriguish where the popping is comin ... Flat Panel Televisions

What type of solder should i use for my A-1054-157-A G BOARD

Electronic rosin core solder NOT ACID CORE SOLDER ... Sony KP-57WS520 57" Rear Projection HDTV-Ready Television

Hi, I have a Sanyo tv. Turned it on this morning and have no sound! I have sky and a PS3 but cannot get sound from iether! I can get sound from the PS3 using my headphones! I've tried as many different things as I can find online to fix the problem but cannot get the sound back... I've turned everything on then unplugged the sky box for 5 minutes and plugged it back in-nothing I've tried resetting all audio options-nothing I cannot rest the tv as a unit as I am using an universal remote . Can a

Have you checked its speakers? If not, check them. If they are found OK, then there should be some fault to its audio output circuit. Check and replace damaged component/s, or, change it a card bassis. ... Flat Panel Televisions

Sony kdl32 it uses t con board y320ab01c2lvo-1 could my problem be main signal board should I bring up menu it shows good but same menu characters also vibrates

... Sony Flat Panel Televisions


Hi.LCD TVs do not have convergence circuit. If display shrunk then it is likely the T-Con board. The other option is a defective PSU that caused the whole TV to malfunction and shut down.Note: If the technician has opened and ... Flat Panel Televisions

As I switch on my TV LCD Samsung (model LE37A656A1FXXC), some vertical coloured lines (semi-transparent though) appears in the left-center of the screen. After more than 30 mins they disappear and they come back from time to time. Unfortunately my warranty has expired. Someone says it's a problem with the T-CON Board. Could you help me find a new one or suggest me how to fix the problem? These are the numbers I've found on the board: 72.37T04.003-O-JC1 Rev. N.: 2007-08-23 Code.no: BN41-0944A

... Samsung LN52A650A LCD TV

Have 23 inch cinema that will power on for 15-20 minutes then goes to sleep and the power button will not work . in my limited knowledge of electronics i was thinking that it could be a capacitor issue as it takes a day or so to get back to square 1. found it so 100 bucks for a used logic board dosn't make much sense as i can get a new monitor for 125 or so. has anyone had the same problem , or someone with some electronic back think it is worth replacing the capacitors.

... Apple LED Cinema Display 27 inch flat panel

Dear Sir, We are using LB04Q02 LCD in our one of display unit. Even with minimum lamp brightness (3mA) We observe some amount of light in area where we are not displaing any characters (R=G=B=0). Is there a way to block this light and make the screen totally black. Kindly give your sugestion. Thanks & Regards crssetty Deepti Electronics Bangalore. India E mail [email protected]

If you check the data on these types of screens, the bright to dark ratio is dependant on the quality of the polarisation screen and down to cost to produce. Black level at zero will still give background light and the human eye automaticaly compens ... Flat Panel Televisions

Hicon HDVD22 (bought Jun 2007) Super DVD player, plays any type discs & works fine but remote control giving problems. Remote will only work if cold, ie from being in fridge. It works OK on all functions until it warms up to room temperature, then it stops working. Put in fridge for 10 mins at 5 deg C, then works fine until warmed to room temp of 20 deg C. Checked batteries/fitted new/checked & cleaned connections. Any ideas? if not can you advise the remote code no.for unit so I can use a new

Either it's a bad soldering (it makes contact only when the metal shrinks due to the cold) or the IR diode is dying. Take the remote apart and inspect all the solderings with a magnifying lens - redo all dubious ones.If this doesn't work then replace ... Flat Panel Televisions

I am using a Universal Electronics Delta Universal Remote.... I have a SV2000 tv/dvd combo and I need the tv code in order to program my remote with the mini box/tv for Insight. I can't find the code on the remote paper..... do you know what it is??

... Flat Panel Televisions

I have a Samsung LCD TV - Model number LE37B679, which is great, but I'm having and issue with it. I can be watching ok for a while and then the picture goes & I'm left with a black screen. The sound remains. I find I have to turn the power off for 30 minutes or so then I get the picture back. Does anyone have any idea as to what might be wrong. I read something about a T-CON Video board issue, but I'm not technically expert enough to know if this is a red herring or not. Please help

... Flat Panel Televisions

Tv capacitor i need to find a replacement capacitor for my tv control board. i have the smaller capacitors but i need the large one that rarely goes bad but lucky me i need it. here is a full description. its made by CapXon 150uf 450volt GL105c temp. rateing. other markings are C628 VENT. the measurements are as follows. length is 1.625 inches or 41.27 MM. X diameter is 0.75 inches or 19.05MM. standard measurements are length1.5/8 inch X diameter 3/4 inches. i used online conversion tabl

... Flat Panel Televisions

I need to find a t-con board for sharp pn-655. Would anyone know where I could get it? Thanks.

Send a emaiol to [email protected] they should be able to assist you with that. ... Flat Panel Televisions

I have a LT 40134 Mitsubishi LCD Tv with colored vertical lines on half of the screen. im trying to find the location of the t con board. the pictures online dont seem to match what i am seeing. anyone may know where its located?

... Mitsubishi LT-40134 40 in. HD-Ready LCD Television

Hi all! I desperately need help in finding a Ribbon cable for my Samsung LN40B350 I have been on the phone and on the computer for 4hrs trying to locate this cable! It goes from the LCD T-con board to the LCD panel! I know... they don't sell the cable alone... It comes with the LCD panel as far as I know. The cable is 80-85 pins, about 2" long by 1.5" wide. Made by Sumitumo. Any ideas of where to get this? I Will pay TOP DOLLAR for it! My old one has a frayed wire or two. it seems so simple but

Http://cgi.ebay.ph/Samsung-Internal-Cables-LN40B530-/270600454414 ... Samsung LN40B530 40 in. LCD HDTV

Need to find the references of the missing electronic boards delivered with the assy PDP module BN96-13447A (PS63FH-YB05)..from SAMSUNG

... Flat Panel Televisions

Need T-con board BN81-02353A for LN46B640, any ideas where to find one?

Contact TV-Parts dot com, the have t6he board you need.\015\012\015\012Tom Miller \015\012Broadcast Engineer ... Samsung LN46B640 LCD TV

How do I find the remote code for (**** Smith Electronics) DSE G3292 tv, so I can use my "One For All " Remote?

... Flat Panel Televisions

System will not turn on. Power to system and standby seems functional. When using remote or TV start button the system just cycles. You can hear the clicking of the electronic board in the back but it doesn't turn on.

This is fairly common with Samsung TVs, the power supply is going out, or has gone out and needs to be replaced. This is going to run you 200-300 dollars to repair. ... Samsung PN58B650 TV

Where can i find a power supply board for the philips type 42pf9431d/37

... Philips 42PF9431D/37 TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0998 seconds