Having problems with your Flat Panel Televisions ?

Alba 32 inch hd ready built in freeview tv,touched the remote power button by mistake,and now it will not come out of standby. Tried the on off routine,and looked at the back of tv,inside,due to out of warranty,and didn't see any faults...can you help.



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a mitsubishi WS 65711, we were watching a dvd and the tv shut itself off and wont turn back on now. When u press the power put it acts like it will turn on then a second or 2 later will shut itself right back off. The green light doesnt blink or anything. We tried unplugging it for a while then plugging it back in. We also tried resetting it but that didnt work either. Can u give us any possibilities as to what to check for, like a fuse. Or what u think it could be. Thanks for the help.


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current pass ... Flat Panel Televisions

Hello there. I need some help with my tv and any help will be much appreciated. I hava a samsung LE46M87BD with a picture problem. I'm getting some black patches on the screen. This patches are not there all the time and sometimes if you tap the back of the tv they go away and then few minutes later come again. This happens from a 1/4 of the screen down. Googling it it looks like it could be the tcon but not sure. Anyone with same problem and sorted it? Thanks


The problem here is that it is intermittent--you may have to gamble and try that board and if fixed are done--if not go for another board--way of the world with these sets ... Samsung Flat Panel Televisions

Samsung PN50B450B1DXZA will not power up. When I try to power it on, it makes a clicking sound and then nothing for 10-15 seconds and another clicking sound. The Red LED on the front flashes when it clicks but nothing ever appears on the screen. I removed the back of the TV and inspected Capacitors but do not see any that look to be bulging. When I try to power it on with the back off, I see a green light quickly flash on a logic board just below the power supply board. Are these clues helpful


... Samsung HP-R4262 42 in. Plasma Television

I have the teac hdr2700t dual recorder and are having problems recording 2 shows at a time, and also pvr records only 1 show at a time instead of ie 7 shows preset please help asap, do I need another cable, looked at the back of the unit, and seems to be connected ok, or is it the connection at the back of the unit that is the problem apart from the above unit is working ok thanks justine!


... Flat Panel Televisions

I am having problems getting cable on my TV. The cable man told me on the phone to change it to either #4 on the back of my cable , and then the cable will work. The problem I have is when I look into the back of my Shart Flat TV I could not find where I am suppose to switch to #4. Right now I cannot get cable on my Sharp Flat TV. Can you help with this, getting the cable working on my TV?? Where can I find this switch #3 or #4 behind my TV Monitor? Sharp Liquid Crystal Flat TV digital Mode


Like i said in ur other post u have to find the input or source buttons on ur remote. Also fyi it's never a good idea to post ur phone number on the internet. ... Flat Panel Televisions

My problem is very similar to other fan inqueries. I've placed a "portable" fan, right behind the fan opening in the back of the TV. I'm looking for a more permanent fix. Can you tell me how to remove the back of the TV, where the fan is located? I'd much rather replace the "internal" fan, then have the additional "external" fan running all the time. Thanks for your help. Terrein


Hi terrein,\015\012\015\012May I know your email address to give you a copy of service manual.\015\012\015\012Jdvillanueva ... Sony KDS-50A2000 50" HDTV

Hi, i bought a KV-HP212M83 4 years back. 1 year back, due to some over voltage in the line,the circuit board burnt away.since then we have been searching for its board and didnt get anywhere.its really sad that such a cool and good TV sitting idle at home ! It would be so kind of you to help us find the board of our TV and make it functional again.Patiently waiting for your reply. regards Anees Kurikkal +919946816899


Call Union Electronics at 1 800 648 6657. Be sure you have your TV model# and the board you are looking for. The other place is Andrews Electronics at 1 800 274 4666. These are professional services. I have used these services to replace boards, that ... Sony Standard (CRT) Televisions

Philips 42model num:pf5331/10, plasma tv, wide screen flat tv, the red light keeps blinking, one long then two short blinks, took back off the tv, pluged in power leed, power goes to power board, then clicks twice and will not start, yes i think its the power board, looked at all capacitors they look good, i have had the tv since 2006 if you can help me, my email is [email protected] thanks terry edwards


Hi raftxxxPlease everyone that comes across my info take a few seconds of your time to rate my solution which you can select at the bottom of my answer Was this solution helpful? YES or NO :)... As i have taken time to answer your questio ... Philips 42PF5421 42 in. LCD Television

When switched on, the power light flashes on and off on the front of the TV but no picture. We have the back part of the panel off and there are no puffed capacitors. Everything looks good except some goop around some of the capacitors. Is it normal to have goop that looks like its flowing out of the caps? Is it a glue that helps it seat better? I have access to a multi-meter and have the checked the output of some of the connectors. Anything to suggest?


It is not normal to have goo coming from the cap. Usually a cap will pop and you'll have the top or bottom puff out. Sometimes a cap will explode and you'll have a little more of a mess. So if it looks like goo is coming out if it then that is probab ... Samsung PS42B430 42 in. Plasma TV

I have a RCA l32hd35d version A I can turn it on and it comes on and the backlight goes back out. The rest of the tv works and it has a picture if you look at it close. Just no back light. I have replaced the inverter and the problem is still the same. The blon pin on the inverter has 3 volts on it even after the backlight goes out The 24 volts is still there too you can keep turning it on and off and the backlight will stay on. any help will be great...


If you have 24vdc feeding the inverter board, the next signal you need to find is the BL_ON SIGNAL which will turn on the inverter board, it should be 3.3vdc or 5vdc on that pin (pin 12 on CN1 of the inverter board), see picture here:\015\012 ... RCA L32HD35D 31.5 in. LCD HDTV

I have a Maxent MX-58HPT51 model P58H10NJA. I bought it in 2007, have been using it for years. I recently moved houses and brought the tv with me. When I plugged it into power at my new house, the LED did not light up and the TV will not turn on. I know the outlet is hot, tried different plugs. I currently have the back cover off and none of the boards or transformers look like they're fried. I'm stumped, please help. Thank you, Matt


Try resoldering the parts at the power supply section and check also connectors make sure that there are no loose connectors.press down fuses make sure it have contact on the board If you have a multimeter measure the continuity of the power cord rep ... Flat Panel Televisions

MY Polaroid TLA-04641C power light blinks back and forth red then blue. I was watching TV and heard a pop, then the TV went out about 10 seconds later. I looked at the caps and nothing appears blown. Please help!!


... Polaroid TLA-04011C 40 in. LCD TV

My lcd tv is about 2 years old my tv wont switch on, standby light wont come on. i looked around and it says heat back of the tv with a hair dryer! this works for bout 2 hours than the tv will go of again. can you please help me thanks sean


Look for bad caps with domed top, you may have bad caps with high ESR when it is cold, when it is heated up the ESR will go down so the power supply will start working again, I use hair dryer and heat source and cold spray to troubleshoot the problem ... Flat Panel Televisions

I have on element flx 2210 22inch lcd tv and when i power the tv to on the little blue light lites up for say 5 to 10 seconds then goes out and changes to amber without coming on and when looking down inside where the on off switch is you see a white flash as its turning back to amber can you tell me what needs to be replaced or how to repair this thank you for your help


As others have stated your problem is most likely caused by bad capacitors on the power supply board. This power supply board is the 200-000-xxxxtltx and is the same board used in the Polaroid TLA-01911 TVs. Here is a repair guide that shows what cap ... Element Electronics FLX-2210 22 in. LCD HDTV

I was watching TV tonight and when I looked back at the television (KF-50WE620) there was a dull red hue to the whole screen. I tried playing a video tape and it was there also. Turn off all input sources, and there is still a reddish background glow to the whole television. I didn't think that I could have adjusted anything to do with the colour since I wasn;t even touching the romte, but pressed reset anyhow, and it made no difference. Help please!


Its a failing optic block and needs to be replaced they are however very expensive to but and quite alot to install too im sorry to hear of your misfortunate mishap good luck ok ... Sony Grand WEGA KF-50WE620 Television

This LCM-22w2 has vertical lines in picture some are 2 inches wide kinda look like color bars in back ground... very distorted... when switching between video inputs the words are scramble....Help!


... Westinghouse LCM-22w2 Television

The image on the screen is now disfonctionnal. There are shadows of yellow and blue surronding each caracter. It means that there is no way of looking at the television. What can we do about it? Is there anything you can tell us to help us fix the problem? Thank you for answering back.


... Hitachi 50FX18B/19K 50" Rear Projection Television

Hi there my lg tv i plug it in an the lights come on on the front an if i look into the grill on the back theres a red light comes on but the scrren is not working and ever is the sound some one said it maybe a fuse but i dont no where to find them plese could you help me and thank you


Sounds more like a powe supply board problem....\015\012\015\01214 caps need replacing.........\015\012\015\012common problem with lg.........\015\012\015\012if you can use a soldering iron...\015\012\015\012you ... Flat Panel Televisions

I have a sears tv thats a tube tv.I have digital cable and i programed the remote.I pressed PIP on off button and my tv went dark and wont shut off.I have to unplug it.Now when i turn it on the tv it is in japanese and the picture is scrambled? or looks like fuzzy? I can get it back to english but nothing can be done for the picture.please help!!


Old-timey tube TVs can't handle PIP. In fact, some old DLP TVs would be in danger of physical damage should you even attempt to output progressive signal. \012\012As such, it's likely that your TV has given up the ghost. Might be time for an up ... Flat Panel Televisions

Sony trinitron kv-32s66, picture flashes, removed back, looking for G2 control (?) supposed to be a black box, I see red wire but no black box or G2 or knobs to adjust. Please help, and a picture or diagram would be great! Thanks!


The red wire on the top of the tube will be connected to l.o.t ..inthat lot u can find g2 below screw....& focus upper screw... ... Sony KV-32S66 32" TV

The colour on my TV is awful, the colours are not true at all. Red looks orange, blue is glaring blue and sometimes the colours fade out a bit and then come back. I have tried adjusting everything but nothing seems to help. I'm not sure if these TVs have "picture tubes" anymore but is there something I need to replace or do I just throw in the towel?


I presume this is a TV with a picture tube, and if so, it would either be the chroma decoder IC or the jungle IC which could be possible causes of untrue colour, as well as the small components around them. Electrolytic capacitors, especially those i ... Sony FD Trinitron WEGA KV-32FS120 32" TV

Hi when I got my aqous I didnt notice the grey horizontal lines on the bottom-left of the screen. The darkness and noticeablity of the grey areas has been greatly lightened by repeatedly cleaning the screen with a good flatscreen screen cleaner, not water as the operation manual instructs. However some grey still is left, heres my question. When I look behind the TV I notice a series of phillips screws around the edge of the back of the TV. Can these screws be removed thereby allowing me to


If u have the warranty then please consent the technical engineer if no then u can do it but take exact precautions while opening as the warranty will be avoided if the product is opened ... Sharp Aquos LC-46D62U 46 in. LCD HDTV

Model 42pa30rq i made took it outa the box and plugged everything in. tried to add my PS3 but when i put the tv on its face when i truned it up all the people look blue like smurfs! PLS help me ima Football fan tryin to get it right before the season start! Oh went thru the manual and tried the reset didnt work!


... RCA P42WHD33 42 in. Plasma HDTV

I have some problem with Power board from Sewing machine EX-660. The one of electrical component blown and I don?t know to identify it. On the board I found the sign it?s look like 2 diodes face to face with parallel line on back (maybe varistor) but that kind varistor I don?t know. Please help.


... Flat Panel Televisions

Looks like same as everyone else. we tried to reset convergence and it didnt help, so to replace the ic things is it a difficult task and is there any instructions i can get to go by. thanks


The only place i am aware that has instructions with their convergence kits is www.tvrepairworld.com ... Hitachi 60UX57B 60" Rear Projection Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0904 seconds