Try to enter auto scan..
Suggested Questions/Answers :
It is recommended you read all this kind of situations
TV staying on one channel only. Tried info, menu, mute power off. When it turned back on it showed the menu and option to reset, as per advice i have read on here. However the select / ok button on the remote does not seem to select the option, from what i read it is then supposed to switch itself off, when turned back on, it should then allow me to plug and play and start from the beginning as i did when it was first purchased. But it does not? :0( any advise welcome. Thanks in advance
Try to enter auto scan.. ...
Flat Panel Televisions
T.V. all of a sudden started changing inputs all by itself. I was watching it one day and the menu screen popped up and started scrolling through input options then selecting one at random and changing. I never touched the remote!!! I tried turning it off and turning it back on and i still happened. I took the batteries out of the remote and it still happened. I even unplugged the tv for a while and plugged it back in and still doing the same thing. It happens every couple of minutes, any adive?
The only thing you can do is replace the Main Board, which will be about 1/2 of what you paid for the set. I don't recommend it. ...
Insignia NS-LCD22-09 LCD HDTV
Well here is the problem I have Hitachi rear projection TV model # 50EX12BA V5K02256 the TV turns on and changes channels. When I go to the menu items (to program the channels for example) via the remote. None of the menu options work. the remote works I can scroll to and select an option and press the enter button (as per the manual instructions) but nothing happens. Is there a way to do a hard reset to return the tv back to factory settings?
Looking for a RF in cable for model 50EX12BA ...
Hitachi 57F500 57" Rear Projection HDTV-Ready Television
Philips 26pfl5522d/05 turn the tv on, blue screen once warmed up and DIGITAL TV the only menu option that works from the remote is the volume bar. Cannot Factory Reset as cannot access menu. Turned on tried once on holding and releasing MENU (on TV control panel button) nothing. Cannot select HDMI source (cross in grey square displayed), the tv has locked me out!! Please Help
Flat Panel Televisions
I bought a TOSHIBA 32KV500B tv. At the Initial Installation mistakenly I selected "yes" for 'do you want to search analogue channels?' guestion. And then I lost all my automatically selected digital channels and I cannot go back to retune the channels. I have no SETUP in the main menu and then no INSTALLATION option. I have 6 main thing: picture, sound, feature, install, program table, Source: tv. I have tried to use the APS but this one retunes the analoge chanells only. Please help me how I c
I had this problem and searched the internet for hours looking for an answer and was given the initial same reply as this and it does not work. To solve this problem all you simply need to do is press source button on the controller followed by press ...
Toshiba Flat Panel Televisions
Screen keeps displaying menu options when that button is not being pressed on remote have to turn off tv to get back to regular viewing or game playing what is making this screen keep appearing
Hi. I suspect that the remote may be the cause. Remove batteries from the remote and see if the menu appears. If it dosent, I suspect the remote may have had something spilt over it and needs to be cleaned out. Hope this helps you out. ...
Philips 42PF7320A 42 in. Plasma HDTV
I have a JVC AV-56P776 television and the picture comes on when the tv is turned on, but then goes out. Still have sound and the menu / input options show on the screen if selected.
JVC Flat Panel Televisions
I have a Vizio and the captions are appearing with a pink box, green background and white text. When I try to turn them off, I cant select the cc option from the menu. How do I fix this, either by tur
Vizio 42 in. LCD TV
After selection an input option the input menu stays up until you push "exit".
Then it reverts to the tv input option canceling out any other menu selection. If you then try another route to get rid of the input menu
I tried using the visual tuning,(brightness etc.) it quickly files through all options over and over. What can I do? This tv has been great up until now.
What has happened is there is a controller for menus and the selection of channel's av hdmi etcafter a hwile with some tvs they start to go on the blink it coud be worse i have had people with tvs that wont change channel keep jumping back and people ...
Vizio VX37L Television
I did not receive a remote control with my NS-LCD32. Problem is we cannot turn off closed captioning. I realize their is a menu I can access on the side of the TV, however there is no option to turn OFF closed captioning. I have option to change how closed captioning looks with the menu and I have tried to do that but it always just looks the same. I really just want to turn CC off completely. Also the HDMI ports don't work at all... but I think we may have to live with that. Thanks in
Well you have several options.\015\012\015\012You can order a new factory replacement remote control for your set as shown at the following link:\015\012\015\012 ...
Insignia IS-LCDTV32 32 in. Television
How do I turn on the captions option on an LG 50PT350. The option menu is not bold like all the other menu options.
If using a box try to turn captions on there first----if hooked via rear jacks the box may have grayed out the option in the set as it is first in line. ...
LG 50PT350 50 in. Plasma TV
I have a big screen Mitsubishi TV WS-55859. The green light on the front was blinking and the set wouldn't turn on. I read on the internet to replace the capacitors on the dm board. I did that and the set turned on but after awhile it tuned back off and the green light started flashing again and the set wouldn't turn on. If I unplug it and let it sit for awhile and then plug it in, it will flash green for awhile and then I can turn it back on. It stays on for about 5 minutes and then shuts down
Sounds like one of the fans needs replacement ...
Mitsubishi Projection Televisions
I have a SONY KF-WE50 rear projection tv, a few weeks ago it started to turn the pic and sound off while the green light was flashing around 30 times. After the light finished flashing both the picture and sound came back. It repeated this 1-3 times just after turning the tv on. We continued to use it as is and now the both pic and sound turns compleately off and a red light is flashing at the front. Non will come back again. If I plug it out (as this is the only option to turn it off) and leave
The green is the reboot process and is normal.the red light is an error code indicator.count the blinks of the red light...it cant be 30 times (I think)it will blink a sequence, pause, then do it again for a total of three times. ...
Sony Projection Televisions
My Thomson DTI 6021-25 DVR is constantly displaying the following error message when I try to access my library or even turn off the box:
"Your hard disk drive is not yet ready. It will be available shortly."
I've tried turning it off at the mains overnight, resetting it by switching off at the mains and pressing power for 10 secs when turning back on, and resetting it by switching off at the mains and pressing menu for 10 secs when turning back on.
Nothing has worked. In the help setti
Flat Panel Televisions
I have a vizio vp50 hdtv20a. A while back we turned it on no picture and it started to smoke. After reading a little about it I decided to take off back panel and see if I could locate burnt part. Could not locate burnt part so repair man came and we plugged in set with back off and turned set on. Resisters on y main board started to get red and start to smoke. So we figured it was a bad y main board. Repair man said he would order part and get back with us in couple days. Three weeks later
That board directly connects to the display panel---you may have a bad display panel which if is the case is fatal---panel alone will cost more than the set did when new----seen this before in the shop where I repair sets. ...
Samsung Flat Panel Televisions
I have an LG 42PG60UD. I am unable to access the menu on this set which I have had since new. If you press the menu button on the remote or the bottom of the set, the menu bar comes up on the screen. If you try then to select any of the sub menus, highlight them and press enter, the TV reverts back to normal viewing and the menu icons disappear. I am therefore unable to access any of the settings in this TV. I feel I need to get it back to the original factory settings so that it can update its
Did you try the buttons on the tv? See if it works and let me know. I am starting to think it needs a firmware update though ...
LG 42PG60 42 in. HD-Ready Plasma TV
Using Info - Menu - Mute - Power for Samsung LE40R74BD does not work. TV turns on, turns back off again, and turns on again but with no service menu, any advice?
Flat Panel Televisions
Magnavox 37mf231D/37 while watc hing tv it automatically switch to the menu screen, I exit and in a few min it goes back to menu. tv will turn on automatically
Flat Panel Televisions
My tv brand is Vivo I got it from Australia about a month ago. Its 50" Plasma tv with HD Tuner. The menu setting and the source selection menu keep popping up on the screen and then it just change to different channels by itself like someone is controlling the remote control. This has been happening for almost weeks now. I turned off the power and unplugged the tv from the power source for a day and turned it on again but it gets normal for about 10 minutes and then the problem starts to occur
Philips 50PF7320A 50 in. Plasma HDTV
Hi, I have a Sanyo tv. Turned it on this morning and have no sound! I have sky and a PS3 but cannot get sound from iether! I can get sound from the PS3 using my headphones! I've tried as many different things as I can find online to fix the problem but cannot get the sound back...
I've turned everything on then unplugged the sky box for 5 minutes and plugged it back in-nothing
I've tried resetting all audio options-nothing
I cannot rest the tv as a unit as I am using an universal remote . Can a
Have you checked its speakers? If not, check them. If they are found OK, then there should be some fault to its audio output circuit. Check and replace damaged component/s, or, change it a card bassis. ...
Flat Panel Televisions
Hi I have a Panasonic LCD 32" and the following happens
1. I turn on TV and after 10-20 min it goes black screen and few second later it turns off
2. Red light blinks at one second intervals
3. I unplug it and plug back it and it will work for 5-10 min longer then same symptom
4. I plug back in and go to menu and reset to default and it resets and then works much longer
It may have unstable power supply due to bad DC filter caps, very common problem in ALL LCD TV's and monitors. You will need to do in-dpeth troubleshooting the problem.\012Basic LCD monitor and TV troubleshooting guide:\012 ...
Panasonic Viera TX-32LX70 32 in. LCD TV
Hello, (**please read**) I know everybody asks this question about Westinghouse products, but I am no newbie to the problems. I have a Westinghouse (SK-19H210S) and it has gone bad once, but I repaired it myself. It has (for the longest time) been randomly flashing off then back on for about 1s (only when i have my PC hook up to it) last week it did the same thing except this time it didn't turn back on. I have again, bought and replaced the bad capacitors that I see. I turn it on only to
Replace the power supply Bad caps are only part of what can happen with power supplies chances are you have a regulator issue or a transformer has failed. Replacement power boards are available at ...
Westinghouse SK-19H210S Television
What's your problem?I TURNED THE FPA FROM THE MENU SECTION AND TURNED THE TV OFF AND THE TV WOULD NOT COME BACK ON.THE RED STAND BY LIGHT IS ON BUT IT WANT COME ON.
Need a remote to get there and see if it helps---not a universal. ...
Standard (CRT) Televisions
Vizio GV47L...when i turn on the tv, the screen stays black. The vizio light turns white and it makes the click noise like normal but after a minute of it doing nothing the light turns back to amber. I can turn it on and off using my remote. I read other problems where people had to unplug there tv to turn it off. Mine will turn off. Would the problem be the power supply or the motherboard. The slave inverter was making a squeeling noise and i replaced it like 2 months ago.
Flat Panel Televisions
Picture I was litening to music threw direct box,vacumming,different outlet then tv. turned it off,& used converter box buttons to change channel. got no pic no sound. pushed more buttons,turned it off, then on hit reset, pulled card out put it back,then turned around to get remote, and saw my 82 yr. old dad holding remote as far out as he could,as if he was trying to get around me! I asked him what button he pushed & he said none. now we have sound no pic. it turns on deep blue screen no menu
I assumes that there is a confused memory IC inside, due to improper data inputs. Try a hard reset to this set. Unplug it from AC mains wall socket, and re-plug it back after 10 minutes of so. This must make it a hard reset. If it do not help you ...
Samsung 50 in. Plasma TV