Suggested Questions/Answers :
It is recommended you read all this kind of situations
Viore PD42VH80, had the power go out and come back on quickly, 3 times. since then, there is just a clicking sound from the tv when it is plugged in, will not turn on though.
Flat Panel Televisions
My Samsung Plasma 42 in. TV turns itself off after a couple of minutes of being on and then makes a clicking sound like its trying to turn on again but it doesn't turn back on. It just makes this clicking sound. If I unplug it, sometimes it will function normally again and sometimes the same problem occurs. We thought it might be the power strip so we plugged it into a different outlet. At first, this seemed to work. Then, the cable box and the sound system started turning off spontaneously
Try checking the standby mode. . . ...
Flat Panel Televisions
Our RCA 27 inch TV (F27227EM), purchased on 1992, is hooked up to our DirecTV DVR Plus box. A simple click of the "ON" button on the DirecTV remote has always turned on both the DirecTV box and the television simultaneously. Yesterday, the TV stopped coming on even though the DirecTV box still powers up. No sound or picture on the TV. If I get my ear close to the TV I can hear a very faint click as though it is trying to turn on, followed a few seconds later by the same faint click as if it'
RCA F27442 27" TV
Lg 52sx4d turned tv on-picture but no sound. shut tv off, unplugged for a few minutes, plugged back in and turned on-nothing. white lights scrolled bottom to top for a minute then top light went red and second light blinked red a few times. replaced bulb, nothing changed. no fan sound or clicking noises, just the light sequence.
Hello\015\012Power supply switching regulator board inside your LG TV is faulty. There are more than 8 regulated supply rails emerges from that board, after switching regulation, which will enter to different sections of circuits in your Tv. ...
LG 52SX4D 52" HDTV
I have a SONIQ QSP500T Plasma TV. When I turn it on you hear it click off again even though the blue light says. When it does not click a second time it comes on with sound only. If I leave it like this for 10 minutes. I can turn it off and back on and get picture aswell.
Would this be something that can be fixed by software?
Hi tinsley_shan,\012\012This is an indication of out-of-regulation in the power supply section. This can't be fix by software/programming because it is a hardware malfunction. The very\ ...
Flat Panel Televisions
I have a Sony bravia KDL32 L5000. pressing power button will turn green light on, but no picture no sound. Cannot turn tv off by power button. Have to unplug tv to turn off.
Can hear click when you plug in tv and when you turn on with power button.
Hello,You need to check the output voltages of the power supply to see which one goes off. It may be due to short circuits some where, if otherwisethe power supply board is dead,do you know basic electronics' and soldering? Most of ...
Sony Flat Panel Televisions
My tcp42s2 once plugged in the tv turns on and off on its own... with no blinking its a 2010. thus started after lightning and got worst after a brownout. when it turns on and off it makes clicking sound. it turns off and on ever 15 to 45 vseconds
Panasonic TCP42S2 42 in. TV
I had the TV upside down for about 5 minutes to take the stand off of it. I put brackets on to mount on my wall. I put the TV on the wall then plugged the TV in. There was a sound and then a puff of smoke coming out of the back of the TV. OOPS!! I let the TV stand right side up for about 15 hours. I turn the TV on and the screen comes on for about 3 seconds then fades out. About 2 seconds after the screen shuts down there is a clicking sound from the back of the TV. Then the Red power lig
Whoops, did you not use the right length screws.\012\012The mounting bracket screws will short onto some electronics if you fit screws that are too long and from your superb description, it sounds like you did everything right but do not ...
Panasonic Viera TX-32LX70 32 in. LCD TV
I have 42 visio will not turn on makes a double click sound when i pug it in wall plug . The yellow light on front of set is on but no picture or sound. What could be the porblem main board or power board
Vizio L42HDTV 42 in. LCD Television
I have a problem with my 42 inch plasma tv,when tv is turned on green L.E.D appears on bottom right and tv works as normal.After 40 minutes to an hour tv makes click sound and screen goes blank the green L.E.D changes to red on the bottom right there is still power going to the tv hence the red L.E.D.Then when i plug it out and plug it back in red L.E.D appears but screen remains off it stays like this for 3 to 4 hours before tv comes back on and the same is repeated again after 40 minute
Hello,\012\012A common problem for these is bad capacitors in the power supply, Remove the back from your Tv and look at the power supply on the left hand side.\012\012You will see roughly around 9 x capacitors that are bulged / domed shaped on ...
Whenever i plug my Sony Bravia KLV-32U300A, it clicks twice and doesn't turn on. You have to wait 30 seconds before doing this or else no sound will be made. It rarely turns on, but does so if you try it once every 1 hour. What seems to be the problem?
32ex500 LCD TV is not getting on. ...
Sony Bravia KLV-32U300A 32 in. HD-Ready LCD TV
Sanyo DP42746 TV - I get the black screen and no sound (like many others). What I've tried so far, 1)checked all the fuses, 2) Checked PWB input and out (118 vac), unplugged the power cord waited a few minutes and plugged it back in. I get the click when I turned it on and a few seconds later another click. Then, the error led blips 12 times (Time Out error). Any ideas Matt?
Sanyo DP42746 42 in. Plasma Television
No sound!!! some please help me!! my surround sound has been working for years but suddenly a few weeks ago it stopped working and hasnt worked since...does anyone know why?
my xbox is plugged into my tv too...i dont think that has effected it though as it has worked with both pluggedi n before i just cant seem to get it to work now!
LG 55LW6500 55 3D HDTVReady LCD TV
TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help
Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ...
Hitachi 57F500 57" Rear Projection HDTV-Ready Television
got this tv not working.
found no power when conected and decided to remove back cover.
found blown PCB fuse and replaced it,turn the tv on and the picture came on for 10 seconds and when out but tv was still on since the logic board led was on,also noticed led on PCB started blinking.
pull power cord off and then plug back in turn power button on and got picture for 10 second PCB relay clicked picture died and led on PCB started blinking again.
what do you think?bad PCB or ba
Hello\015\012The power regulator PCB has some fault it it. It does not outs proper regulated voltages needed to the other PCBs in your TV. Normally Plasma TV power regulator PCBs are very difficult to repair, and PCB as whole should be replac ...
Philips 50PFP5332D 50 in. Plasma Television
Wont turn on, unplug for a while, plug it in here the click then a lighter sounding one 1.5 to 2 seconds later, try pressing on and nothing.
Look for any loose contacts in power outlet. Try connecting the TV to another power outlet, which you are sure works well. If the TV is still in same condition, switch it off manually, switch off power, remove plug and wait for 48 hours and retry ...
Sony KDL32L5000 32 in. LCD HDTV
Have an hp cptoh-0602 loud pop screen went black would not power up found a fuse burned out not sure what board it came off of, replace and set will still not turn on red light stays on it will click once when initially plugged in then it just stays red. no sound that i can hear
HP PL4260N 42 in. Plasma HDTV
Picture is black. sound went out a few weeks ago and now all that seems to work is the red power lamp turns on and I hear a click but that's all. I am not concerned about the picture since it is c
The click is a power relay on the main board and if the red light is on I would suggest looking inside to see if it has more than one relay--follow the power cord into the set----some of these sets have one relay but others have up to 3.They ...
Hitachi 53SDX01B 53" Rear Projection Television
Hi we have an NEC HDTV Model: NLT-22HDDV4
We had a a blackout yesterday and since then when we turn on the TV we have sound and the menu functions work, however the screen is blank and pure white? Do you have any solution to our problem? Obviously we have checked all the power supplies, plugs, inlets and outlets from the TV but nothing has changed, screen is still white.
NEC "white" screen.Solution: Replace open circuit surface mounted fuse (1.25A) located on LCD panel.Remove cover on back of LCD displayheld by 3 screws.The fuse is located near the socket.Submited by T.Lyras Australia ...
NEC Flat Panel Televisions
Hello, i have the sony flat panel display, model fwd-50px2, and as somebody says, when i plug it, red power light come on, i push it to turn on and the green light come on, makes a click and sounds like doing something but no image on the screen, it stays black, i think could be a board, because the fans don't work either, so, i writting you to ask which board i need to get, or what do you think the problem is, i really appreciate your help. Thankyou so much.
Sony FWD50PX2/S 50 in. Plasma Television
LG 42PQ30 plasma tv wont turn on anymore, when you plug the tv in it makes a click noise and when you hit the power button the blue light comes on then changes to red after couple seconds. Note the screen isnt coming on and no sound.
What do you have to fix/replace to have tv work again, I opened back of tv up, I dont see any of those compactors thats look bubbled or leaking. I see some have like hot glue on them some have white glue. What do you think is wrong with the tv, i want to tr
I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ...
LG 42PQ30 42 in. Plasma TV
Blinking red Red light blinks 14 times. Unplugged from surge protector box, waited several hours and replugged. Red light still blinks 14 times. So I unplugged it and plugged directly into an outlet. TV clicked when I hit power and red light is on and steady. Will not turn green, still no sound or picture.
What is the brand name to your TV? Provide more details please. If you wish to get more details, surf this link.\012http://electronicshelponline.blogspot.com/\0 ...
Flat Panel Televisions