Having problems with your Flat Panel Televisions ?

What is the difference between the backlight inverter and the voltage inverter?


\015 I have a Emprex HD-3201 TV and there is no longer a picture but there is sounds. I was told it was the backlight inverter. When I look up the backlight inverter it looks nothing like the part in my tv. So I typed in the inverter product number and it came up as voltage inverter. Are they the same thing and is the even the problem with my tv?\015

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

What is the difference between the backlight inverter and the voltage inverter?


... Flat Panel Televisions

I'm looking for a backlight inverter VIT68001.95 for my DYNEX DX-LCD32-09. I've found many different backlight for this model. Does it have to be the VIT68001.95 which is currently in it or can I use a different one and what's the difference?


... Dynex DX-LCD32-09 LCD TV

Viewsonic n4060w black screen, no video sound ok. So I've been reading this forum about the problems others have faced with this tv. I decided to purchase pair of inverter boards. After installing them the same problem, no difference. I swap the boards to see if I can find a defective one, nothing. I can see the black backlight on, I have replaced caps on the psw before. Can I suspect the psu once again or am I missing something?


... Flat Panel Televisions

I have a Rca 26LA33RQ upon initial use screen backlights bright white slowly fadeing to black. I do not know that the speakers work because I have not connect cable to it. I feel as if this could be the T-Con board. Or a low voltage production on my inverter board. I can find almost no information on this unit I repair al types of electronics being Navy trained leads me to try and find a publication to use but for this unit there is none. I am not even sure where the t con is on this one. There


... Flat Panel Televisions

I have an ELCHS321. My backlight started to flicker. The inverter board is JLS-05-32EI. I have the back open and noticed that the LED on the inverter board was blue and flickering as well. As the set warms up the LED turns white but still flickers. The LED goes solid white and the flickering stops. Is this caused by the inverter board or or the backlight. Is there anyway to load the inverter board output to isolate th problem.


I would suspect and check first the voltages going there to see if low when cold and come up and if they are moving up and down when it flickers----points to problem in power supply ... Element ELC-HS321 32 in. LCD TV

I have a RCA l32hd35d version A I can turn it on and it comes on and the backlight goes back out. The rest of the tv works and it has a picture if you look at it close. Just no back light. I have replaced the inverter and the problem is still the same. The blon pin on the inverter has 3 volts on it even after the backlight goes out The 24 volts is still there too you can keep turning it on and off and the backlight will stay on. any help will be great...


If you have 24vdc feeding the inverter board, the next signal you need to find is the BL_ON SIGNAL which will turn on the inverter board, it should be 3.3vdc or 5vdc on that pin (pin 12 on CN1 of the inverter board), see picture here:\015\012 ... RCA L32HD35D 31.5 in. LCD HDTV

I have a Vizio VW32LHDTV10A that produces sound but no picture. I have checked the main power board for 24v to both backlight inverters and 24v is present. I then hooked up both backlight inverters and turned the TV on and the blue LED on the Slave inverter comes on, but goes off after only a few seconds. What further tests could I perform to check which part is defective or what component is the most likely cause?


When you reconnect the inverter boards, when the LED goes off on the inverter board, do you still see 24vdc? You shuld also ty hooking up test lamps to the 24vdc to see if it will stay on.\012Right now I have a feeling the problems are in the b ... Flat Panel Televisions

Backlight inverter i need to know which wires go where from the lcd screen to the backlight inverter. does anyone know where to find a diagram? Thanks in advance


... Proscan 19LA25Q 19 in. LCD Television

My Cyberpower CPS 1200 EI LCD Inverter output voltage is176V and varies with load and there are some times charging problems.


... Flat Panel Televisions

I am engineer from Indonesia in Medan City I want by inverter backlight LCD SAMSUNG MOD LA37R81B SERVICE CENTER SAMSUNG IN MEDAN ENGINEER SAY CAN'T BY INVERTER ONLY JUST CAN BUY LCD INCLUDE INVERTER . I SAY FROM ENGINEER WHY ? PROBLEM JUST INVERTER WHY BUY LCD . PLESE HELP CONSUMAN AND SAMSUNG NOT READY PART CONSUMEN NOT INTRAS SAMSUNG FERY MUCH PRODUK SAMTING


... Samsung B2430HD LCD TV

I have A Samsung 52 inch LCD TV model #LN52A580P6FXZA. The relay clicks at A random rate, there is A red light that flashes steady. It will not power up. All my standby voltages coming from the power supply are present as well as the run voltages. Power supply on voltage is present, inverter on voltage is present, occasionally, it will give A loud high pitched squeal. It never comes on. Any help would be appreciated.


... Flat Panel Televisions

I have a Samsung LN46A530 46" LCD TV. Lost my backlight and wondering if the two wire connectors feeding the R and L inverters is where I would meter for power, and if not what are these for ? Or is it the ribbon cable on the top left (it's pin ids are 1. 12v_cold, 2.FB, 3.FB, 4.GND, 5.GND, 6.LD, 7.LD). Would this TV use 12 V to power the inverters ??. The inverter enable is on (5V), so I assume it is either the pwr supply or the master inverter.


... Flat Panel Televisions

Uneven backlight Sansui SLED4680 led tv. Backlight much brighter on the right side of the screen. I've tried to adjust with different brightness, contrast and backlight settings but the picture is always much brighter on the right side. Is the a solution to this problem or is the set defective? Bought floor display model today from ShopKo in Billings Montana. Thanks: Del


... Sansui Flat Panel Televisions

Replacing a Vizio Backlight Inverter


I have a television that did this. The picture went out but it continued to have sound. It was the projector bulb. I ordered from a dealer on ebay, very resonably priced. It came with instructions on how to install it and was a very easy fix. ... Vizio 42 in. LCD TV

I Have sanyo 47xr1 lcd tv.it was switched off,but didnt turn on the next morning.however,i noticed that standby light turns blue from red.but no backlight nor displayall voltages are available.no blown caps,no dry caps nor any that looks suspicious.inverters are all ok and all voltages present.main control board warms up normally.but still nothing on the screen.what could be the problem?


... Flat Panel Televisions

Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,


Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ... Vizio VT470M 47 in. TV

Voltage TV DOES NOT POWER UP. WANT TO TRY A DIFFERENT POWER SUPPLY BUT DONT KNOW THE VOLTAGE


... Proscan 19LA20Q LCD TV

My RCA Model 27F530T is turning on and off after being on for only a few minutes. When it turns back on, its ususally on a different channel. I read the manual, the only thing thats comes close to sounding like this is a high or low voltage in my apartment. What else could it be, my voltage is fine.


Hello\015\012The fault you reports indicates some voltage problems inside it itsef. Check first, for any loose plug in point on your wall power socket. if it all found ok, there will be some loose soldering contacts inside your TVs power inve ... RCA 27F530T 27" TV

Backlight inverter on magnavox 50mf231d/37 is causing pic to flicker or flash. What s the part number to this inverter


... Flat Panel Televisions

I have a samsung ln-t4053h that had a bad caps. I replaced the caps and the tv turned on fine and i put a flashlight to the screen and the screen turns on but the backlight is on 10 and it looks like its not on at all so that leads me to believe the backlight inverter. As I was testing this the power board slipped and touched a metal part in the back of the tv, sparked, and now the tv wont turn on at all. I figure that i shorted out the power board. If I replace the power board will me tv turn o


... Samsung LN-T4053H 40 in. LCD Television

Have an Element LCD model number flx-3210 that loses raster after 1 minute. Audio is fine. No blink codes and all caps are fine. Checked ESR and replaced common failing caps already. ec17 and ec18 450v 10uf. Also changed d10 and FETs q17 and q16. Nothing changed. When I lose raster, the LED D13 on the power board lights solid. I do NOT have any backlights on. Dark room tested and backlights go out completely when this happens. I also tested the two transformers on the inverter side of the pow


Hi Jeramy.These TVs are indeed re-branded Polaroid. You will not find the service manual under Element. You must find the equivalent Polaroid TV.The Polaroid Flx-3202 is the same as element flx 3202 and 3212 the FLM-3237 is ... Flat Panel Televisions

I have a vizio 42 inch tv and all the sudden the screen just went black .no picture,just sound and there is no light on in the back.could this just be a lamp or is this what is called a backlight inverter and is there more than one inverter?


There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these (or any) sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced. ... Flat Panel Televisions

Electro help green light indicator on for a second the supply board is on for output 12v 6v with backlight,then turn to red light blinking then the voltage supply is off with backlight.


It sounds that the back-light inverter has the fault. If there is any winding short [cannot detected by measuring with an Ohmmeter], this type of fault can occur. The only thing to do is replace the back-light inverter board. The LED blinks indica ... Sony Bravia Klv 46X300A 40X300A Multisystem Flat Tv

I replaced the inverter panel on my 40" proscan tv but still have no picture and no backlight


... Proscan 40LD45Q Full HD 40 LCD TV

RCA L26W11 Backlight Inverter Problem


... RCA L26W11 26 in. HD-Ready LCD Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0288 seconds