Having problems with your Flat Panel Televisions ?

I have a Samsung model LNS4041dx/xaa found 4 capacitors burnt out replaced them but still having trouble with a jittery picture what might be wrong ? Someone said that I might need to go to Samsung website to download updates ,what do u think



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Samsung model LNS4041dx/xaa found 4 capacitors burnt out replaced them but still having trouble with a jittery picture what might be wrong ? Someone said that I might need to go to Samsung website to download updates ,what do u think


... Flat Panel Televisions

Samsung UN46D6000SF Horizontal line goes from bottom to top picture will freeze until the scroll line reaches the top then repeats its self. It acts like its reloading the picture. Anybody have any suggestions on what it might be. I think it might be the main board but didnt want to take a hundred dollar gamble until i heard form someone with the same problem or if someone knew what it was


... Flat Panel Televisions

I changed the main board of my sony 46ex620 and now is turning on for 2 seconds and the red light blink 10 times, I need help. I think I need replace the power supply board someone help me please


... Sony Bravia Kdl-46ex620 Internet Tv Compatible Full Motion

I have an element TV with a MLT070A power supply board. I'm not an electrical guy, but a technician came out and showed me the bulged caps and said that was what's wrong with the TV. He said he couldn't get replacement parts (I think the whole circuit board)but maybe the bulged cap components could be replaced by someone. I don't want to junk this TV and wonder what I should/could do. They're going to send me a $350.00 check for the extended warranty I paid 650 for the TV and 150 for the Cir


Hello,power supply board is dead, if you know basic electronics' and soldering you can handle it ? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up o ... Flat Panel Televisions

RESET IMPUT TV TURNS ON AND SCANS LOCAL CHANNELS. DIRECT TV SAID IMPUT NEEDS TO BE RESET. I think I need to get a code.


... GE 32GT740 32" TV

My Dynex DX-19L200A12 makes a buzzing noise when I turn my ps3 on, it doesn't matter if I have the volume high or low. I think it might have something to do with the connection or I might just have a bad stereo. Could someone help?


... Flat Panel Televisions

My JVC LT-22EX19 just turned off. I have proper power and the blue light at the bottom of the TV is a solid blue. When plugged in there is a 4-5 sec pause before the back light turns on and it only stays on for about 1-2 seconds then turns off. I've tried everything. I think I read something about an EEPROM that might need resetting.


... Flat Panel Televisions

I have vertical lines on the entire right side of the screen on my Olevia 242-S11. I've replaced the t-conn board three times, the first and third gave me a black screen, the second gave me less vertical lines with the rest of the right side blurry. The t-conn boards were from ShopJimmy.com they said I might need to have my panel tested.


Most of the stuff from jimmy's its second hand ( not good working or working maybe) first and the last i suppose you got a problem with the power supply on the T con on the second i suppose you have a problem with the big chip in the middle the scali ... Syntax Olevia 527-S11 Television

47LG50 screen light goes black after about 45 minutes of being on, sound still ok. Turn the tv off and back on and its fine for another 45 mins to an hour. The on/off light goes from red to blue-ish when screen goes black. As a note I took out the power board adn checked the capacitors and none where bulging or burst (someone said maybe they are drying out)...does that sound like the problem of is this an inverter board issue. I just want to change the what might be the most likely issue


Good day!That problem is commonly happens when the inverter board failed.But before you replaced that its better to check this out first.Just follow this simple and D.I.Y procedure on troubleshooting. ... Flat Panel Televisions

Jvc lt-42pm30 Exact model is JVC-42PM30/ZBA Once plugged into power source TV has a fast blinking horizontal lines . Disconnected from cable box and blu-ray player. unplugged TV for 24 hours, did not work. Thinking it might be capacitor. Not sure where to buy or what the proper model/mfg I need to purchase. TV is approx. 24 months old, but not used very much. Please help!


... JVC LT-42X579 42 in. LCD TV

My projector shows many small squares on the screen . They look like stars in the sky . Someone said it is the optical engine. What part do I need to replace and what is cost. I live in Davao city Philippines


... BenQ Flat Panel Televisions

I have a 50 inch Vizio plasma TV. I bought it in 2007. Recently the TV started shutting itself off. If I unplug it for a while and and reset it it will come back on. I had a guy out to look at it today and they said that I need to get a new one. What do you think?


... Vizio P4 46 in. HD-Ready Plasma Television

My TV has hundreds of little white speckles showing up on the screen, kind of like white noise. They aren't staying in one place just flashing all over the screen. A green bar flashes as well every so often. I took the problem to a local TV specialist retailer and they said that it could be a power surge, and that I might need to purchase a Surge protector that filters out the problem. Any idea on what this could be?


... Mitsubishi WD-52525 52" Rear Projection HDTV

I am thinking it might be the Volume + button is stuck, but I can't seems to press just fine. I know it isn't the remote either because the batteries are not even in it at this point. I unplugged it and left it like that for a while thinking it might reset something but still nothing. If it is in fact the physical button how can I go about fixing it?


If its the button the front keyboard will need replacement. You can check the tact switch on that board. If the switch is working then the main board would be suspect. ... Seiki SC323FI 32"lcd hdtv,720p,60hz,3-hdmi,1-usb,pc,1-component,1-comp

I have a 60vf820 hdtv. The pictures appears to have a greenish tint but not all of the time. Sometimes the screen looks dim and sometimes appears normal. I have had the tv for 4 years and replaced the lamp once. Do you think replacing the lamp might fix everything or do you think I might have a light engine problem?


If your TV looks 3D, warped, or distorted it likely has a convergenge problem. If however it just looks dull, washed out, redish, greenish, or blueish or if it looks like objects on the screen have halos the fluid in the lens has soured.Y ... Hitachi UltraVision 60VF820 TV

I think I need a new remote control I ordered a new remote that I was told this was an alternate the original was no longer available I order a PLT 3250 remote should I have order a PLT 32 instead the


Have the first remote tested--most shops have a tester--point remote at it and press buttons and it reacts with a flash (the tester) and if remote tests good the problem could be with the remote receiver in the set ... Protron PLTV-32C LCD TV

I need my tv remote reprogrammed. AT&T is my tv provider. I spoke with a tech and she was unable to help me reset my Curtis remote.. She said that I needed to contact you and get an Input Option for my tv remote so that I can use the AT&T remote. I have called your no. several times and held on with no answer. I really need help right away. Thank you. Phone no. is 704 806 3037.


Could you please confirm if you're trying to operate your Curtis TV with your AT&T Remote or is it the other way around. ... Curtis Flat Panel Televisions

I am thinking about buying a Samsung 72" DLP (Hlt7288wx/xaa) for $500. The seller says a tv repairman says it needs a color wheel replacement. Do you think this is something that would be difficult to install and likely have more problems down the road? Thanks in advance


Yes,tvs with a colors wheels design into it are more prone to brake down and more quickly than tvs without colors wheels design into it.The colors wheel in the tv spins at 12000 RPM at every cycles to make and let the tv Light Engine shine a beam of ... Samsung HLT7288W 72" HDTV

Can't find manual for Sharp LC-C3237U television. I think this might be a "costco" exclusive. What might be the regular model numbers???? 32"


Have you tried this site?\012tv.manualsonline.com/manuals/mfg/sharp/lcc3237u.html ... Flat Panel Televisions

Someone offered me a jvc hdtv av-56wp74,and one person said just the bulb in the lamp has to be replaced;then when called jvc they said i had to by colored tubes for 300.00 each,,,,who do i believe


The tubes rarely fail in this model so it may be a convergence issue instead. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. ... JVC AV-56WP74 56" Rear Projection HDTV-Ready Television

I called vizio because my e320vl will not come on. It says vizio then goes black and the logo turns orange again. Customer support said I need a firmware update but I need to send them a copy of my receipt before they will send it to me. But I do not have a receipt.


... Vizio E320VL 32 in. HD Ready LCD TV

The left side of my screen is darker than the Problem with the Philips 47PFL7432D/37 TV The left side of my screen is darker than the right and after a minute or so (presumably when the set heats up) the whole screen starts to flicker with multiple horizontal lines shown. There is even a flickering noise coming from the back of the set. I upgraded the firmware but no joy. Please tell me what part I need so I can get this awesome TV running again. I'm working with someone there but may need to up


I just bought a television on Craigslist with this exact problem for a very good price. There are two boards inside on the left and right sides of the screen called the Master and Slave boards. KUBNKM133LB is the exact number on the board in my hand. ... Philips 47PFL7432D/37 TV

The volume on my tv went out, i had a repair man come out to diagnos the problem. the part number needed is 313912725831 he said it is the smp sound board. it has been 3 months and i finally contacted him and he said that part is no longer available. can you help???? thank you, frank nissen


Hello\015\012As far as picture is OK, there must be sound output from the TV. If not, first check its speaker for open voice coil. You can chek it either with the help of a mutimeter of with a mere torch cell. If the speker is Ok, sound out ... Philips Magnavox 55P9271 55" Rear Projection Television

Bought a phillip tv from a pawn shop they said it was a motel tv it work fine but dont seen to get all the cable channel it seen like it still program for a motel,,it might said HBO channel 35 on top but it really chanel 15 nbc


If your TV unit is cable ready no need for tuning to get all the cable program.if the TV is what we call surplus and already repaired with the technician maybe it was re channel so you can't see the exact channel from the cable. if the problem is th ... Flat Panel Televisions

I need order the speakers FOR THE Disney DT1350-C 13" TV (MICKEY ) TV. I CALLED MEMOROX AND DISNEY THEY SAID THE PART IS DISCONTINUED ? PLEASE HELP I NEED THE RIGHT SPEAKER OR BOTH IDC THANKS


... Disney DT1350-C 13" TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1088 seconds