Having problems with your Flat Panel Televisions ?

42inch olevia too bright colors distorted has new main board still same what can i do?


\015 Tv guy tried to flash firmware trashed main board. i bought an installed main board no change in pic too bright and colors distorted rest to factory makes worse have to turn bright and contrast to lowest levels still too bright colors messed up\015

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

42inch olevia too bright colors distorted has new main board still same what can i do?


... Flat Panel Televisions

I bought this N2635W it wasnt turning on. (So I thought it was the power supply) I bought a new power supply, and still didnt turn on.( So I thought it is the main control board) I bought a usded controler board, then it just turned by itself and there was only a white screen. No sound no controls responding. ( So i thought it needs a new one). I bought a new controller board from viewsonic,. Now it responds to the power button, I can turn it on and off., but still theres only a white screen


The tv Tuner signal board is the cause and the problems.That the board,where the incomming broadcasting signal cable wire plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish tv Tuner signal board for the replacement. ... ViewSonic N2635w 26 in. LCD Television

My Vizio 55XVT1A power on, has sound, but no picture. I changed new power board, main board, T-cond board, but it still same problem. What's wrong with it? Is it anything with inverter board? Than


If this is an LCD tv the backlight inverter is bad, a good way to check it is to shine a flashlight close to the screen and see if you can see a faint picture.Let me know what you find ... Flat Panel Televisions

Hi, Im working as a electronic technician in a garment factory.i have JUKI 1900 bar tack machine There's a fault in main circuit board. When I press the ready button, pressure foot goes up for a while n Itz comin to down position.acording to the my knwlage holding current of pressure foot solonoid is too low. I changed the power transistor but the problem still same.I change the the circuit board and itz working porperly with new circuit board.pls help me to repair the old circuit board


If your problem is solve then ok otherwise call me 9915100566 kamali try to help you ... Flat Panel Televisions

Won't power on the red light is on. had a tech look at it he said it was the main board so bought a new new one when I put it in still had no luck.


Has it got a separate power board, as that is what I would repair first.Hope that helps. ... Flat Panel Televisions

I've a LG 32LC56 that suddenly becomes black screen while i was watching it. Since then, i was never able to get any picture on screen, even the menu picture. Sometimes, when I switch it on, i see some colored lines on the upper left screen part, but never a menu. I've replaced the main board by a new one, the problem is still the same. May i try to change the screendriver board?


Learn about T-CON board: \012http://www.scribd.com/doc/25276757/E40951307-TCON-Troubleshooting-10-22-09-OPT ... Flat Panel Televisions

LCD screen on a Sanyo DP46848 is lit up (backlight = OK) but picture very faint and is washed out - no control over brightness, contrast or color, removing the LVDS cable from the main board results i


... Flat Panel Televisions

Samsung lnt4665fx xaa video prolbem apperas main board has been zapped visible burn marks on hdmi port 2 blue light under samsung still comes on and red light flashes and relay clicks but no audio or video replaced caps in power supply did not help should the main board be replaced? should the main board be replace any suggestions would be helpfull thanks


... Projection Televisions

I have a Samsung PS50Q97HD plasma TV that keeps blowing new boards and I don't know why. It came to me with a faulty YSUS that had damaged the VS supply section in the PSU board. I fixed the PSU and fuse and have good VS voltage now. I replaced the YSUS main. I powerd the TV and the upper YDRIVE (Yscan buffer) board chips when pop. I put this down to it getting damaged unseen when the YSUS went faulty. I replaced the YDRIVE upper with new and then the lower board went faulty too (holes blew in t


... Samsung Flat Panel Televisions

I have a sanyo dp46848 46 inch lcd flat screen. It started messing up by half the screen having a dark tint. I was told it was the main board. I ordered one and told them it was a 1AA4B10N21300 with N6EE on the tuner. once I receved the new board and installed it the tv would not even come on, I then noticed the number on the tuner was N6ME. This new board also has a place for a plug the old one dont. could this be why it will not turn on? And yes i can put the old board back in and it will come


Yes, you need the proper board. the n6me is a different out put than the N6EE ... Sanyo DP46848 LCD TV

I have a LT37HVS Olevia flat-screen that has a similar problem to one of the posts. I had the same blue standby type light on the front that stays lit, but turning it on just makes this light blink, and no display. I did as the posts here sugested, peeled it apart and manually inspected all of the capacitors. To my dismay I haven't seen one yet that looks bloated or leaky. I have inspected the main power supply board, both display boards and the main board. There were a few capacitors that


If turning it on makes the light blink then its a clear case of open circuit.. Honestly there are lots of components like diodes, fuses, transistors etc., and either of them if shorted create an open circuit. I do not think this is a capacitor proble ... Olevia LT37HVS 37 in. LCD HDTV

I had 3 horizontal black lines on my samsung pn50c450b1dxza. i replaced the y buffer board. there was no picture but still sound. when i put the old y buffer board in the picture works again, but still with the horizontal lines in it. is the new board i ordered defective? or is there another problem?


... Samsung PN50C450B1DXZA 50-inch Class Television 720p Plasma HDTV

The TV has a section of it that is dimmed out and darker in brightness. Is this the Main Board that needs replaced?


Check the CCFL lamps used in the backlight section. These camps can cause this type of fault, as they are very like the flourocent tube lights that we use to illuminate our room. As it goes older, the ends of them will get burned, and the intensity ... Vizio 55" M550NV Razor LED LCD HDTV, 1080p

I have an rca model l46wd22yx5 lcd tv no sound cant find any internal parts failure .i swap the main board and the board still no sound


... RCA L46WD22 Television

My main breaker blew on my house and voltage dropped way down, anyway i replaced my breaker box but during all of this something blew. the tv wont come on now i have been told i need a new power supply board and an new convergance board. any ideas as to where to look for these items. this tv is real special to me, it was my late fathers. i would really like to fix this for sentimental reasons. any and all help i appreciated thanks in advance


Even if there is a part that is not stocked usually ued.net can get it for you. Here is the list of parts they have listed for your televisionhttp://www.ued.net/ued/searchResults.do?searchStr=P61310&mfgCode=TCE&searchType=model&listParts= ... RCA P61310 TV

TV went dead and called service tech. he told me that I need new main board.... this will cost me around $ 220, THE TV cost is $ 300 ohh boy, I need the main board lg 22" part EBT57840508


You need to get exact number from the board: see here\012http://www.shopjimmy.com/catalogsearch/result/?q=EBT57840508 ... LG 42LC7D-UB Television

Hi, so I was told to replace my psu by a tech because of what the service manual said. I replaced it and its doing the samething. No picture but sound. All of the readings are coming out correct. I tried to do a reset on the logic but but nothing happens. I can do a reset on the main input board but nothing happens after it resets the TV. The fan on the main input board does not come on at all. Please help. I can control channel, source and volume but still no picture.


This no picture but sound issue is not caused due to power supply. The loic control board is also ruled out because all the other functions are operational. That leaves us with two possibilities 1) Sustain board(S) or 2)Buffer BoardsIt is not p ... Samsung HP-R5052 50 in. Plasma HDTV

Led24a45rq hi, i have this rca led24a45rq that won't power on redb led light constant on, i have 12v coming from power supply to the main signal board could it still be power supply problem or main signal board tell me what you think it could be. or could it also be the back light inverter


... RCA LED24A45RQ 24 Class LED HDTV - 1080p, 1920 x 1080, 16:9, 800:1 Dyn

Lg philips main board, ive just replaced this board as old board was stuck in service mode flashing red blue green screen, ive connected this new board an now have sound but no picture. t-con board te


Does the screen totally black or with only white screen?. recheck all the connections going to t-con board and x board which you missed. ... Flat Panel Televisions

I have a 42PA30RQ RCA Plasma = Has sound , no picture, makes clicking noise when I turn the set on. I changed the main supply board, av board, logic board y sustain and x board. Still no picture, just clicking and sound. Did not see any bad capacitors.


... Flat Panel Televisions

I have a Vizio VP42 HDTV (inside says LG PDP42X3U400). One day I turned on the TV and heard a pop. I took off the back of the TV and inspected the main power supply board (P/N 6709900019A). Capictor C802 had totally blown up. The tv would not power on at all. I removed U801 and when plugging in the AC cord I heard two relays turn on and then back off after 1 to 2 seconds. I gave up troubleshooting that board and bought a new power supply board. When I installed this board and plug in the


If Va and Vs are missing even when the Y-sus board is disconnected from power board then the new board is defective - return it. On the original one the board is shut down (the relays are disconnected) because there is still a short on one of its out ... Flat Panel Televisions

My Vizio VW42L will not power on. No backlights, no power from pson pin. has 5v stand by power on power to main board. no 12 or 24 volt power. has a new power board and inverter boards.


The main board is defective the power on command originates from the main board and thats what gives the signal to start powering up the set. Replacing the main board should solve the issue. You can get the main board from ... Vizio L32 32 in. LCD HDTV

Hi there, my sony grand wega kdf60wf655 had stopped working and was flashing 5 red lights. I tested the voltage from the power board to the lamp ballast board and got a 272v dc. Just replaced the lamp ballast board and now get blinking lamp indicator. Tried a new spare lamp that i had in reserve and still flashing red lamp indicator every 1 second. Any ideas? thanksp i


... Sony Grand WEGA KDF-55XS955 55" Rear Projection HDTV

I have a Samsung LN40A530P1FXZA. It will not power up. I get 2blinks followed by short quick blink and then it repeats itself. I have replaced the power supply board and also the main board, and it still will not work. Does anyone have any idea as to what is going on with this tv? I wish I had an error code book for this tv, but I do not. The only thing I have not replaced is the TCon board. Need someone's help.


Try to download the manual on www.retrevo.com to see the error code for sure..Before you decided to replace t-con board please refer to the manual first,,but there is the possibility that t-con was faulty.Hope it helps..don't forget t ... Samsung LN40A530 40 in. LCD TV

Samsung hlp6163w dlp tv not working, new lamp, new ballast, still three blinking lights


If color wheel does not run lamp will not fire----with lamp removed have you looked at the wheel----if not running it will cause almost instant shutdown of lamp and the set.If the DMD board is bad time for a new set as it is well over 500 . ... Samsung HLP6163W 61" Rear Projection HDTV-Ready Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 3.2504 seconds