Having problems with your Flat Panel Televisions ?

Philips 26pfl5522d/05 turn the tv on, blue screen once warmed up and DIGITAL TV the only menu option that works from the remote is the volume bar. Cannot Factory Reset as cannot access menu. Turned on tried once on holding and releasing MENU (on TV control panel button) nothing. Cannot select HDMI source (cross in grey square displayed), the tv has locked me out!! Please Help



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Philips 26pfl5522d/05 turn the tv on, blue screen once warmed up and DIGITAL TV the only menu option that works from the remote is the volume bar. Cannot Factory Reset as cannot access menu. Turned on tried once on holding and releasing MENU (on TV control panel button) nothing. Cannot select HDMI source (cross in grey square displayed), the tv has locked me out!! Please Help


... Flat Panel Televisions

I have the samsung LN52A550. When I turn the tv on a blue screen appears. I tried changing the source with the menu button but does not display anything. The TV is about 2 years old. The sound works. When I try a different input(dvd player) same results(althoug I cannot change ths source because the menu does not display). The dvd is attached via a three cable. The directtv is attached via hdmi cable.


Try thisMethod one- with set on, hold down the exit button on the remote for 10 seconds. It will bring up the warning it will reset to the defaults it had when removed from the box and powered up initially. in the warning box it will show the c ... Samsung LN52A550 LCD TV

I have an olevia lcd lt32hv tv that i picked up from an electronics dump... it seemed that there wer no problems with it but come to find out the aspect ratio is off a bit and the picture is a little bit colorless (on rgb out) and for some bazzar reason i cannot get into the menu... when i click the menu button it sits for a second and the screen goes black flashes and goes back to the input i was on (source) i have no clue whats wrong but can someone help with the menu button?


... Olevia LT37HV 37 in. HD-Ready LCD Television

I have a Pioneer PDP-4340 plasma TV. I was watching the football game when I decided to go to the menu button and see if I could adjust the color contrast. Although it tells me I cannot perform that operation (why?) I continued to scroll thru all the categories: e.g., sound, audio, etc., etc. To my knowledge I did not change any settings, just keep pushing the menu button to come in and out of the selections. All of a sudden I lost my picture but the sound still came through. I shut down t


This like your tv mainboard has error, change it with new one, contact service center to do that ... Pioneer PureVision PDP-4340HD 43 in. Plasma HDTV

I have brightstar br100p remote & i connected my laptop with hdmi cable to my tv. But now i dnt know how can i select hdmi-1 on the tv as my remote doesn't have any menu or setting button. plzzzzz help me.


... Flat Panel Televisions

I bought a TOSHIBA 32KV500B tv. At the Initial Installation mistakenly I selected "yes" for 'do you want to search analogue channels?' guestion. And then I lost all my automatically selected digital channels and I cannot go back to retune the channels. I have no SETUP in the main menu and then no INSTALLATION option. I have 6 main thing: picture, sound, feature, install, program table, Source: tv. I have tried to use the APS but this one retunes the analoge chanells only. Please help me how I c


I had this problem and searched the internet for hours looking for an answer and was given the initial same reply as this and it does not work. To solve this problem all you simply need to do is press source button on the controller followed by press ... Toshiba Flat Panel Televisions

Lexsor I have a black screen with sound. It is connected to a virgin cable box. I cannot access the source menu button from the remote or the TV set itself. When the TV is powered up a small blue box appears saying searching...then the tv pictures appears for half a second. I have rebooted cable box several times, checked cables, changed scart leads- no change.


... Flat Panel Televisions

Lg plasma tv 42px3rvc-ta, cant tune in and the volume up?down and channel up/down buttons wont work, and so as a consequence i cannot use the menu to retune. However the hdmi and the component i/puts work as in picture is showing but no sound.


... Flat Panel Televisions

I recent purchased a 23" full HD LED TV from The Source. I have it hooked up to a Shaw PVR and have programmed the Shaw remote to access more channels and be able to program taping. When I first turned on the TV and was about to do the initail setup, it went from the Welcome screen to Channel Scan and despite my best effort I cannot get it to scan the channels. I tried pressing OK and then pushed the channel button but nothing happen. I then pushed Menu, scrolled down to TV and then channel


Hi there,\015\012\015\012There is always a possibility of getting a lemon when you buy any new electronic device, but I hope this is not the case here. From what you describe, it would appear that the channel scan is not finding anything ... Flat Panel Televisions

Samsung 37 TV changes sources at random. Tried clicking source button, it brings up menu half the time, and menu button switches source half the time. Any ideas?


Look for any jammed buttons on remote or on control panel. Try removing the batteries of remote and see. Look for any loose contacts in RC jacks/sockets/Cable or even the power outlet. ... Samsung 37 in. Flat-Panel LCD HDTV

I have programmed my remote to an older JVC television. everything works, but i cannot change the input from the remote. I have a ps3 hooked to the tv. anytime i want to play my ps3 i have to manually press the menu button like a million times until i finally find the input option. is there a way to get the input button working? or at least find input in the menu? the menu button works on the remote.


If the tv has an input button on the side it should let you scroll through all the inputs without having to go through the menu. Hope this helps. ... Flat Panel Televisions

Philips 42pfl5522 LCD TV. Digital channels no longer work, when i select the digital channels with the remote either with the Digital MENU button or the EPG button I just get a small blue cross appearing in a box in the top left of the screen. Using the A/D button or the AV selection button simply takes me to a blue screen. It's the first time the TV has been used for a few months (having been to Australia for a while) but it did work when we got back for about a day. I'm not sure if


... Flat Panel Televisions

Just bought a used 1998 20 inch tv vcr combo with no remote. I ndde to adjust the color and cannot find a menu button on the front of the tv to bring up color or brightness or sound balance. it has buttons for night/game, fm/tv and vjolume and channels. nothing i push will bring up a menu. how do i find the menu ? it is hooked up to cable tv right now. also, where could i purchase a remote for this tv?


I should think most any universal remote will operate it.\012You can look here for a user guide, but you'll need the model number off the back of it.\012 ... Panasonic Combination Televisions

Every few mins the menu comes up on the screen then goes away i even removed the menu button on the tv thinking it was pushing the menu select button on the back of the tv to no avail.


Check the front control buttons switches inside for any struck, especially to menu button. ... Coby LEDTV2326 23 TV

JVC AV-36D502 belonging to my 99 year-old father somehow got set to close captions (i managed delete the closed captions) and SAP. i cannot get the SAP setting changed to STEREO. using the menu i can get STEREO highlighted, but the TV is still in SAP mode. i don't understand exactly how things are selected in the menu--the manual says toggle up and toggle sideways, but says nothing about how to lock in changes. best i can do is make changes and quit the menu, but the SAP selection is unchang


... JVC AV-36D502 36" TV

I have lost my remote for my JVC LT-32DA30J i need to retune my tv by using the set top buttons i can enter the menu but cant confirm my selection in the menu? is there are a confirm button available?? ive tried universal remotes(sky and an 8 in 1)' but same problem??? please help : /


... Flat Panel Televisions

TV staying on one channel only. Tried info, menu, mute power off. When it turned back on it showed the menu and option to reset, as per advice i have read on here. However the select / ok button on the remote does not seem to select the option, from what i read it is then supposed to switch itself off, when turned back on, it should then allow me to plug and play and start from the beginning as i did when it was first purchased. But it does not? :0( any advise welcome. Thanks in advance


Try to enter auto scan.. ... Flat Panel Televisions

My tv brand is Vivo I got it from Australia about a month ago. Its 50" Plasma tv with HD Tuner. The menu setting and the source selection menu keep popping up on the screen and then it just change to different channels by itself like someone is controlling the remote control. This has been happening for almost weeks now. I turned off the power and unplugged the tv from the power source for a day and turned it on again but it gets normal for about 10 minutes and then the problem starts to occur


... Philips 50PF7320A 50 in. Plasma HDTV

The TV remote doesn't work at all (not even the on/off button). I have even changed the batteries. The cable remote works partially. I can change channels with it but I cannot change the volume. The mute button doesn't work either, nor the TV on/off button. I can turn on/off the tv from the tv's own power button but when I press either the up or down volume button of the TV (not the remote) or the up or down channel button on the tv I getthe "Video Selection" window. The main problem, it seems,


The problem does not seem to be that of the remote more so coz the front panel controls are not working either. I really believe that this is an issue related to faulty microprocessor circuits which means that we have to replace the main A/V board to ... Toshiba REGZA 42 in. Flat-Panel LCD HDTV

Cannot find channels using external air antenna on Sabre flat panel television Model: LCT321BKA


... Sabre Flat Panel Televisions

I have a VSX-920-K Pioneer receiver, a DV-220KV-K Pioneer DVD player, and a Sony CRT TV with no HDMI input but only a video component input. I connected the dvd player to the receiver using an HDMI cable (for audio) and a video component cable (for video) as shown in the receiver's manual. I connected the TV to the receiver using a video component cable. I have set the HDMI Control option of the receiver to "OFF" to enable the selection of the HDMI input in the Input Setup Menu of the receiver b


... Pioneer Flat Panel Televisions

I have an LG 42PG60UD. I am unable to access the menu on this set which I have had since new. If you press the menu button on the remote or the bottom of the set, the menu bar comes up on the screen. If you try then to select any of the sub menus, highlight them and press enter, the TV reverts back to normal viewing and the menu icons disappear. I am therefore unable to access any of the settings in this TV. I feel I need to get it back to the original factory settings so that it can update its


Did you try the buttons on the tv? See if it works and let me know. I am starting to think it needs a firmware update though ... LG 42PG60 42 in. HD-Ready Plasma TV

Not all of the buttons on my remote for my Celestial G6C52H-C1 work and I have accidently selected panal lock on the tv. Now I can't use the buttons on my tv and the broken buttons on my remote wont allow me to scroll down the menu to unlock it. Please help because I can only watch a few channels and that is it. I can't even change volume or put it on av to watch a DVD. The enter button on the remote doesn't work either. Thank you. Liz.


... Flat Panel Televisions

I have a jvc tv and i cannot find the factory rest... I no longer have dtv or my other hdmi port... someone please help ive tried every button!


... Flat Panel Televisions

Apex model #AT2704S front panel buttons stop working? Menu, channels, volume, and power? Also has a red key in lower left corner and the screen is blue. I have tried mute and function buttons on univ


... Apex Digital Standard (CRT) Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1796 seconds