Having problems with your Flat Panel Televisions ?

I dont have my TV set in cable etc., it is used with an indoor ariel and that has worked fine until 18th when it went to digital....i have tried the reset button but it doesnt give any options should i throw it away



Answers :

Look or inquire to see if a digital box is available--antenna goes to it and it to the set.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I dont have my TV set in cable etc., it is used with an indoor ariel and that has worked fine until 18th when it went to digital....i have tried the reset button but it doesnt give any options should i throw it away


Look or inquire to see if a digital box is available--antenna goes to it and it to the set. ... Flat Panel Televisions

The picture mode on my tv is stuck to wide. When I try accessing this feature through the remote's "p-mode" or "p-size" buttons it gives me an message on the screen that says "not available." I've also tried accessing this feature through the menu on the remote and on the side of the tv but I still keep getting this same error message. I tried reading through the manuel, but there is nothing under the troubleshooting area that helps or addresses this issue. Is there a way to reset the tv t


If it says "not available" then you have to try the settings of the input source such as a cable box or something. Chnage the aspect ratio to 16:9 . If you can get me the model number of the box I will see if I can get your precise instructions. ... Flat Panel Televisions

When i hit the device button on remote nothing comes up on the screen the green light on front of tv starts blinking and the tv shuts off shortly there after . i tried the reset button on front of tv doesnt help


This is known as the bliking green light of death problem. Its common and fairly simple to fix. You can get the parts and instructons from sites such as www.TvRepairKits.com ... Mitsubishi WS-65809 65" Rear Projection Television

I have a mitsubishi WS 65711, we were watching a dvd and the tv shut itself off and wont turn back on now. When u press the power put it acts like it will turn on then a second or 2 later will shut itself right back off. The green light doesnt blink or anything. We tried unplugging it for a while then plugging it back in. We also tried resetting it but that didnt work either. Can u give us any possibilities as to what to check for, like a fuse. Or what u think it could be. Thanks for the help.


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current pass ... Flat Panel Televisions

My 55 inch mitsubishi tv turns on then off right away i unpluged the tv for 8 hrs and i tried holding the buttons in and my tv doesnt even light up


... Mitsubishi WS-55511 55" Rear Projection Television

Turned off cable box but did not turn off tv. storm came throuht last night green light next to reset button flashing. tv want turn off or on. tried to reset want reset. unplug tv for a while pluged in tried reset again still want go off or on and want stop blinking


Rforester,\012\012This model Mitsubishi has some capacitor problems with the DM board and the power supply. See my tip at http://www.fix ... Mitsubishi WS-55511 55" Rear Projection Television

I have a Mitsubishi WS-55909 projection TV. There was a power outage and when the power came back on, the TV won.t turn back on again. There is this light (Timer) that keeps on blinking on the front panel of the TV. I tried unplugging the Unit and waited for about 15 to 20 minutes before turning it back on , still won't work. I tried using the original remote for the TV to try to turn the power on, still doesn't work. There is a reset button beside the timer light, and I tried to reset the unit


Unplug,replug the tv back like 24 hrs later.That the whole tv is resetting itself everythings.Tv now should be working again.If still have the same problems,than ur tv DM power supply board is have dying parts,must repair the tv DM power supply board ... Mitsubishi Projection Televisions

The remote doesnt work with the tv at all. and when i try to change the channel manually with the button it says no input availiable. but the volume button works just the channel button that doesnt. I trried hitting menu on the remote nothing works


UNPLUG THE SET FOR A WHILE AND PLUG IT BACK IN TO SEE IF IT WILL REBOOT-sounds like a microprocessor problem and could have been caused by a power outage etc. ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

Hi I have a Mitsubishi HDTV 1080 Integrated and when I try to turn it on I get nothing except a green timer button that flashes. I have tried unplugging then plugging back in with no results I have also tried pushing the reset button also with no results, do you think you may know what the problem may be?


Trinz73,\012\012You did not mention the model number. If your unit begins with WS-xxxxx see my tip at http://www.fixya.com/support/r7065 ... Projection Televisions

My sony KP-51WS500 needs reset. I hit a button on the remote and my picture went off. I started pushing buttons like an idiot trying to get the stations back and in the process it messed my picture up. I have tried everything. I can't get it ti set back to factory settings. Can someone please help?


It is possible that you messed up the convergance of the projector lamps on this TV. Try the convergance setup to see if this helps. ... Sony KP-51WS500 51" Rear Projection Television

Power problem The TV doesn't power on. Suddenly i was watching tv and suddenly the tv was turning off, then i tried turning on (with the power button), and the image appeared one second, and was turning off inmediatly Now, when I push the power button, the tv try to power on, an image appear, and right away, the tv turning off.


1) test the outlet wall, plug a desk lamp and see if turn ON, if does the circuit is o.k and the contrary, reset the c.breaker2) test the power cord for defective and repair or replace3) test the main switch for short or open and replace4 ... Standard (CRT) Televisions

Mitsubishi WD-73735 will not turn on and there are no lights on front. The power supply was replaced, and is brand new. I fix HDTVs, and have had very little problem resolving other issues with other TVs. This one is strange. Need help, please. When I plug it in, you can hear the PS get power, but nothing turns on. Tried the 'Menu' and 'Input' combination....nothing. Tried plugging it in, with the 'Menu' button pushed...nothing. I can hit the 'Reset' button on the


If you have no lights come on the front of TV, you definitely have a power supply issue. Don't know what previous servicer did, but I would be looking at ALL wires & connectors. ... Mitsubishi WD-73735 Television

Video 5 title stays lit when tv is on and doesnt go away.


... Projection Televisions

TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help


Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ... Hitachi 57F500 57" Rear Projection HDTV-Ready Television

Picture I was litening to music threw direct box,vacumming,different outlet then tv. turned it off,& used converter box buttons to change channel. got no pic no sound. pushed more buttons,turned it off, then on hit reset, pulled card out put it back,then turned around to get remote, and saw my 82 yr. old dad holding remote as far out as he could,as if he was trying to get around me! I asked him what button he pushed & he said none. now we have sound no pic. it turns on deep blue screen no menu


I assumes that there is a confused memory IC inside, due to improper data inputs. Try a hard reset to this set. Unplug it from AC mains wall socket, and re-plug it back after 10 minutes of so. This must make it a hard reset. If it do not help you ... Samsung 50 in. Plasma TV

I have a reset button problem after a power outage...keeps blinking and trying the reset w/a paper clip tip doesn't reset. I dont' know who or where PTS is. I live in Denver. Any ideas?Thanks.


Power outages are usually due to surges. The problem you are talking about cannot be fixed by a reset. To find out the exact source of the problem we are gonna have to try the error code operational check. Procedure:1) Unplug the tv and ... Mitsubishi WS-55511 55" Rear Projection Television

I get sound but no picture from my the tv. Its not the satellite box as other tv gets a picture from same box. pressing menu button on remote doesn't give a picture either. Wii attachment doesnt give picture on AV input but also gives sound


Black screen on all modes.\012Boards and prices: http://www.shopjimmy.com/catalogsearch/result/index/?q=LG+42LC2D+&sto ... LG 42LC2D 42 in. LCD HDTV

Mitsubishi CS-31205 TV Never had a remote for this great TV, but, accidentally pushed a button on my Comcast Cable remote and the TV is now in "Mute" mode. Not the Comcast box 'Mute' . Have tried pushing the "Reset AV" button on the front to no avail: Does TV have to be 'Off', 'On', or unplugged? Can I access this feature, to turn it off, without a Mitsubishi remote? Is there some combination of front buttons to undo this?


You are supposed to be able to switch the Comcast Remote to TV mode and switch Mute on that remote to change back to standard volume. If that doesn't work try volume up on the TV. Otherwise if neither of those work then check Remotes.com for a repla ... Standard (CRT) Televisions

I have a Logix TV model number 1960HT, most of the buttons on my reomte work except the volume & mute buttons, I have tried all the codes listed for Logic TV and I have reset the remote by pressing & holding down the *,# and power buttons & re-entering the codes but none of this has solved the porblem. DS


... Flat Panel Televisions

TV not turning on. When trying to switch on TV - light on power button on TV goes green; hear buzzing noise over speaker for few seconds and the green light on power button goes away. TV not turning on. Any help is greatly appreciated


Replace the deflection board. You can get deflection boards from www.tvrepairworld.com for your model. ... RCA D52W20 52" Rear Projection HDTV-Ready Television

Im trying to hook up my first gen 60g ps3 to my sharp lcd monitor, pn-455. im using hdmi for my ps3 - dvi for the monitor. all i get is a black screen. i've tried doing a hard reset and still nothing. if i use the component cables for the monitor it works but the picture is not 1080i. if i hook up the monitor to my laptop with the same hdmi-dvi it works with my laptop. why doesnt it work with the ps3?


... Sharp PN-455 45 in. LCD Television

I need to reset my LG PQ3000 TV but the menu button does not work, I have tried unplugging it and pressing all the buttons on the remote.


... Flat Panel Televisions

I have a sharp LCD tv 2years old it I will press the power button to turn it on and it will stay on for approx. 10 seconds and then turn itself off. I have even tried holding the down the pwer button for a few seconds to reset the tv but it still does the same thing


Hope it will help you, you may have problem with power supply and inverter area. low rated and leak capacitors can cause low output voltage on the power supply the tendency is the power to reset or turn off itself. just also considered bad component ... Flat Panel Televisions

The TV will not power on? I can not find a reset button. I tried unplugging it, etc. What else can I try. It is exactly one year old Donald 401-741-2083.


This is more than likely a capacitor problem on the power supply. Please use caution when checking on the power supply as it can stil remain charged even when unplugged. Check for bulged/busted or leaky caps and replace as necessary - put it back t ... Philips 42PFL5332D 42 in. LCD Television

I have just re-installed my pdp5071 after it being in storage for a few years.. the unit will not power up . at plug-in several clicks at upper left rear of unit ( click - stand by red light on-off, pause then click blue power light on, click blue power light out, pause click, click ) unit then is dead .. i have tried the unplug reset operation several hundered times same result. i have tried the mechanical power button a few hunderd times - randomely at plug-in i get a single click and red stan


There are two power buttons on this TV. One on the lower left front and one on the right side. make sure they are both on. During storage it may have deactivated both of them. ... Pioneer PDP-5071HD 50 in. Plasma HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0986 seconds