Having problems with your Flat Panel Televisions ?

My Aldi Tevion LCD 3210ID HDTV-Ready LCD Television won't come on unless I blow warm into the vents near the power unit


\015 My Aldi Tevion LCD 3210ID HDTV-Ready LCD Television won't come on unless I blow warm air into the vents near the power unit. The green/red on/off light at the centre front of the TV alternates colours until the power board warms up. I am assuming a capacitor is the culprit. I would be truly grateful if somebody can identify the faulty component/s and where it/they can be obtained. Many thanks - James Sullivan\015

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My Aldi Tevion LCD 3210ID HDTV-Ready LCD Television won't come on unless I blow warm into the vents near the power unit


... Flat Panel Televisions

Have a lg 20ls7d 20 in.power problem .theres power to the tv.the red light in frontis in .i hit the power button on top green light comes on then blinks 5 times screen cums in or a second then goes off.so does the green light .but the power light in the front wont come back on unless i hit the power button on top again.like i was turning the unit off.any ideas?


... LG RE-20LA70 20 in. Analog TV LCD Television

I have LG LCD TV Model No: 22LF12R. The problem is the TV fell face down when it was still powered ON. Now when you switch it on the power LED comes on but there is nothing on the screen. When you press the remote control the LED responds or it blinks and when you power off on the remote it goes off and when you power on it comes on. The problem now is there is no display on the screen. There is no voltage in the display unit. Which components shoul I change. Hope u reply soon.


In my experience, there will be damage to the main pcboard, usually under the transformer.If you are lucky you can find all of the broken track and remake the track.Good luck. ... LG Flat Panel Televisions

Vizio lcd tv wont come on unless i hold the power button on the same time i unplug & plug it in constantly


... Vizio L32 32 in. LCD HDTV

I have Samsung UN46B8000XFXZA LED TV. After power surge it will not come on. Plugging it in causes the blue power up light to come on for one second. The relay on the power supply (BN44-00270A) begins to click. The screen does not come on. All appears dead except for the clicking of the relay on the PS board ever few seconds.rnIf I unplug the connector from the power supply to the Main Unit Board (BN94-02661E) and apply 110v, the screen backlight comes on and there is no relay clicking. (


Yes based on your testing it appears that the power supply is at fault solely and you can opt to attempt a repair or replace it altogether. Unfortunately you will not be certain that the main board does not also need to be replaced until you have rep ... Samsung Flat Panel Televisions

I have a Hitachi 51F510. When I power it up it clicks like it always has and the power indicator light in the front comes on but it has no picture or sound. The remote will power the unit on but after a few seconds it wont power the unit off. I opened the rear panel and only saw a green light on, dont know if there is suppose to be more than one light inside. Any help on where to start would be greatly appreciated. the internals are filthy, going to get a can of compressed air while I wait a rep


You need to follow power cord inside the set; should be a board on right side it goes to----this set uses up to 3 small black relays---one or more is bad---tap on each until power light goes out.if questions let me know. ... Hitachi 51F500 51" Rear Projection HDTV-Ready Television

My JVC LT-47GZ78 will not turn on. When I press the remote power or the main power switch on the set button the blue LCD light on the front of the TV lights and then starts to blink, the TV does no come on. Also there is a cliccking noise coming from behind the set. I'm in a country with 220v power supply.


The blinking indicates that the protection system of the power board from the tv has detected a short on one of its outputs and has cut the power to it to prevent further damage - the clicking is made by the main power relay being disengaged, repeate ... JVC Flat Panel Televisions

Hi i have a 24'' LCD t.v.Dynex DX-24E150A11.lighting put the power out .when i plug it in red power light comes on then when i press power on the blue light comes on but it does nothing.how ca


... Dynex Dx-24e150a11 24-inch 1080p Led Lcd Hdtv

The red power button was coming on and you would have to plug it in and unplug it to kind of warm it up to come on or all power would go off and you would have to leave it unplugged for a couple of minutes now it wont even power up at all


Look on youtube my aunt had the same problem and thats how she fixed hers ... Element Electronics ELCHW261 26 in. TV

Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,


Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ... Vizio VT470M 47 in. TV

I have A Samsung 52 inch LCD TV model #LN52A580P6FXZA. The relay clicks at A random rate, there is A red light that flashes steady. It will not power up. All my standby voltages coming from the power supply are present as well as the run voltages. Power supply on voltage is present, inverter on voltage is present, occasionally, it will give A loud high pitched squeal. It never comes on. Any help would be appreciated.


... Flat Panel Televisions

What is the firmware upgrade process for the samsung LN40A550P3F lcd tv? the unit will sometimes not power up, then will loop in power process, then will go dead, then turn itself on. firmware updates are recommended. how do i do these? do you have any other recommendations. today is march 18, 2011. we bought the unit in june 2008.


It will not fix your problem. The main board that you plug all your inputs is going bad. You can take it out and reflow it with a heat gun and it will last a little while sometimes. But you'll also have to leave your tv on. ... Samsung LN40A650A LCD TV

Wiring diagram this 12 V DC fridge is not working correctly, the problem is this: when you switch to cool all the green led's come on, however it will not cool, also when you switch to warm, the first red led comes on, however only for about 1 minute. I have checked the unit in center between the aluminium fins and i get cool, also warm when i connect to 12 V DC.on the PCB it has the following KNL-316 Kernel also VER.2.0 04/2/24. so if possible i need a wiring diagram. have replaced the 2 Bridg


... Projection Televisions

Hi the telveision is a swisstec j37/1 lcd tv the red power light is on but when we press the power button the blue light comes on then there is no light and the tv does not come on or light up .


The power supply board is shot at.................\015\012\015\012needs replacing.......easy fix to do yaself. ... Flat Panel Televisions

We just had a lightning storm come through which knocked out the power. Once the power came on we tried turning on our sanyo LCD 24k40 tv it wouldn't come on. How do we fix it


I've checked on line for a schematic of this TV but was unsuccessful but I suspect it is one of two problems.\015\012\015\0121) A fuse inside the TV was blown from a power surge caused by the storm. If you can locate it pull it out and look to ... Sanyo DP46848 LCD TV

Older Sabio LCD TV Model LCD 40-500 has clear picture for only an instant when powered on, then picture is complete milky way ( with tiny red, green,white dots ). As TV warms up the picture appears from the top, then slowly spreads downward toward bottom. Jumpy Dots still present after warm up. Can anyone help?


... Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

I have a Sony Wega KDF-E55A20 rear projection LCD TV. The screen stays black when pressing the Power On button. When the Power on button is pressed, a GREEN blinking light (5th light in a row of 5) comes on and blinks about 58 times, along with an intermittent "popping static" noise. It then goes to a STEADY RED accompanied by the 2nd light in the row of 5, BLINKING RED. It continues like this until I unplug the power cord. It will do the same thing if I plug it back in an press the Power On but


It sounds that the SCL ' SDA signal path has some short. You must have thorough knowledge in electronics to follow. Checking I2C bus signals is a skilled work. If you wish to get more details, ... Sony KDF-E55A20

Blows 0.8A small fuse (right next 2 power supply Input from mains power) every time it's replaced. It stopped powering up one day & ever since, hav'nt been able 2 power up d unit.


Hi,Let me know model number and brand info of tv to find out possible cause of fuse blow and to suggest a solution.Thanks. ... Flat Panel Televisions

Have a LCD TV Insignia m/n NS-L3220 -10A. Unit sometimes does not turn on. After turning on, if the red on light turns to the blue on light, it always comes on. If it stays on red it does not turn on. If TV is on Ch 7 only it sometimes comes on with extreme background noise in audio. Switch from Ch 7 to 6 and back to 7, the background noise is gone. All other channels Ok. Customer has said he has turned on the TV and it didn't come on, left the room for 10 mins with TV still switched on - when h


With all of these different problems I would start with looking for swollen caps on the power supply. If they look good and test good with an ESR and all voltages are good coming from the power supply, then it would have to ... Flat Panel Televisions

I have an AOC LCD tv when I hit the power button the light turns blue and then right back to orange, at first it would eventually come on after pressing the power button several dozen times and work fine until it was turned off, now it just goes from orange to blue and back to orange or the light goes out completely. I saw a video that said when it does that it could be the power supply or the main av board, what do you think?


Hi there , sound like it may need output caps replaced in the power supply . ... AOC L26W861 26 in. LCD TV

I have a insignia 26inch lcd flat screen tvmodel number ns-ltdvd26-09 dvd combo and i turn it on with no other hookups just power cord ..and it powers up goes to blue dvd screen if i dont touch it it will stay on 20 60 seconds then powes off it does it every time ..and some times wont even come on ...and for the few seconds it does the screen is white with fat lines in it ...i look for a blinking diognostics light but have never seen it blink when tv is on stand bye the power light dont blink ..


... Insignia LCDTV26 26 in. Television

Sansui SV-3715LCD, I switch off the unit at the wall socket, when I plugged it in the next day there was no power, not even the LED indicator light on the front of the LCD activates. I checked the plug power and it has AC supply voltage right up onto the internal Switch-mode power supply board. Any suggestions


Continue to check--every set has a standby power supply that powers the remote circuit to turn set on and it runs 7/24 if set is plugged in.Never a good idea to turn set of by taking the AC away--it can cause micro problems(micro processor). ... Flat Panel Televisions

I have westinghouse vr-4625 When I power on my lcd tv for first time no sound come out but picture, the speakers do a buzzing sound, if a leave my tv On for about 10 minutes and power off and power on


... Westinghouse Flat Panel Televisions

I have a Phillips 32PFL5322D/37 tv that is about 2 1/2 years old. Recently the TV stopped working. All I see is 8 red blinking lights when I try to power-up. After reading multiple threads and suggestions I replaced the Power Supply Unit but still no change in the 8 red blinking lights. I have a power aux board coming in the mail and I plan to install. I am out of ideas here. Any other possibilities? It seems everyone is having the same problem with this TV. There must be a reason.


... Philips 37PF7320A 37 in. HD-Ready LCD Television

Hi I have an Akai 42 in. LCD TV Model# LCT42Z5TAP,when I try to turn on the TV the green LED light comes on but the screen does not ,then i try to turn it off but it does not comes off the green LED light remains,so i have to unplug the TV in order to turn it off then turn it back on the problem remains the same as before, so I leave it on for 10 mins unplug it again then turn it back on and only then it comes on and works proper.It seem the Tv now needs to be warmed up for 10 mins or more for


... Akai 42 in. LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1819 seconds