Having problems with your Flat Panel Televisions ?

I have 6 gp328 and my multi charger power supply burned i guess due to the variying of frequency, can i use diffrent power supply with the same output voltage of the burned power supply?



Answers :

Yes,,the same input,output and also wattage..

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have 6 gp328 and my multi charger power supply burned i guess due to the variying of frequency, can i use diffrent power supply with the same output voltage of the burned power supply?


Yes,,the same input,output and also wattage.. ... Flat Panel Televisions

I have a Power Supply Unit in Westinghouse SK-26H240S TV. TV had no power prior to disassembly. This TV has the Delta DPS-210EP-2 power supply. I appear to have proper voltage on high side, but i am not getting 24v; 12v; 5v, and 5VSB on secondary side output. The Bridge Rectifier is putting out 53V DC. The filter caps have been replaced on PSU.


... Westinghouse LTV-27w7 7 in. LCD HDTV

Replacing lamps on Dedolight DLH4 head with DT12-4 power supply. As soon as I go to full power lamp burns out .Using Osram 12v 100w lamp


... Projection Televisions

Required output voltages from an acoustic solution lcd television power supply unit


Only the original supply is going to work---schematics with voltages and wave forms are rarely available online except to a authorized service center for that brand---they want to SELL REPLACEMENT boards and not have someone fix them. ... Flat Panel Televisions

My tv has dark picture. The fuse keeps popping on the zsus board on my lg flatron ru-42px10. I checked the output voltage from the power supply vs-350v, va-95v. I know there's something wrong on the power supply but what? Can you help me?


... LG RU-42PX10 42 in. HD-Ready Plasma Television

I purchased a power supply from a well known distributor online and it is for Polaroid FLM-373b lcd tv. part # MLT070AX- and possible <<DOA>> If it is pluged in and power is @ the board should I have my supply voltages ALL present @ the output feed connectors all I have is standby 5v ?? no 12v no 24v and tv still wont turn on ..fuses all good..


Yes , the SMPS unit will output the 5-Volt which is the feed to the main CPU- the processor. Now trace the +5 to the processor and check the oscillations on the processor. Only if the processor works and outputs to feedback ... Flat Panel Televisions

Supplied output voltage has hight frequency


Line-load-regulation to the TV power supply board is very low. Replace the main power supply board. ... Standard (CRT) Televisions

RCA 32LA30RQ power light red at plugin , No function after that, dead, no key function. all supply voltages 2 volts under normal. Uses IPB733 inverter supply board RE46DZ1202. A schmatic would be a great help! Been a master bench tech for 30 years ,Still building my data base of new Bad designs.. Never ending fail by design.


... Flat Panel Televisions

I have a sony kdl-52v4100 tv. It had a power surge and now blinks 2 times. I changed the power supply with a known working one and it burnt it up. I changed the power supply again and the bu main boar


... Sony Bravia V-Series KDL-52V4100 LCD TV

I have A Samsung 52 inch LCD TV model #LN52A580P6FXZA. The relay clicks at A random rate, there is A red light that flashes steady. It will not power up. All my standby voltages coming from the power supply are present as well as the run voltages. Power supply on voltage is present, inverter on voltage is present, occasionally, it will give A loud high pitched squeal. It never comes on. Any help would be appreciated.


... Flat Panel Televisions

Hi I have Hitachi vcr VT-M838E. The unit his all the correct voltages on the output of the power supply but there is no display lighting up & the whole machine is dead. cure/ideas please taa


... Flat Panel Televisions

My TV is no power but thera is an output voltage (B+) of 110v.is it normal for using regulator STK73907-T?


... Sharp 19R-M100 19" TV

Black screen and have sound vx42lhdtv10a(vizio 42 2008)power supply is ok(12v,24v,5v) main board have 4v and all fuses is good . my question is? how can i test my inverter board output voltage?how can


... Vizio Flat Panel Televisions

When power supply to TV exceeds 224V the TV switch off. It then tries to switch "on" again and will do so until the power supply to TV is lower than 224V. I ran a AC DC regulater to keep power output to TV as close to 220V. Then TV plays perfect. Aventually I unplug TV and go to bed. I have tried UPS's as well. Same problem. I think power supply unit in TV is damaged due to power surges. I replaced this 2 year old TV with a new one. Costly excercise. I still belive this TV can be fixed.


If a power supply is what you want, they are available all over the world, just use the internet like you did tonight and use Google, type in your tv make and model and power supply and you will find them. Parts are really hard to come by now the Qua ... Flat Panel Televisions

Power supply board test point voltages for Panasonic th-42pz77u


... Flat Panel Televisions

Have Protron PLTV-3250 TV and I was told the power supply board was bad. All indications concluded this was the problem. Replaced the power supply board (FSP194-3F01 power supply) and turned the TV on. It has power, but I have no picture. I can hear the sound from each channel, but that is it. I can change the different sources using the remote control and when I come back to TV, the picture (white fuzz or blue screen) will flash for a moment, then it goes black. If I select a source that


... Spectroniq PLTV3250 32 in. LCD TV

Dear sir I am working with a Sony KVJ21MF model TV with a problem in Power Supply Section. No output from Power Supply. Only Noisy Occilation sound (around 50hz) from power supply. I replaced the SRT6707 but no improvement. Can anyone help me. Asif, Bangladesh


Replace the electrolytic capacitors 220uf and 1000uf/35v on your primary section of the regulator. also check the .01 Mylar cap. in parallel with b+ rectifier diode. also check if the horizontal output is shorted.. ... Sony FD Trinitron WEGA KV-32FS120 32" TV

Hi, I have a Sanyo 50" DP50740 and need a dual voltage power supply put in or at least a 220volt power supply. What power supply do recommend and where can i get it since Sanyo only sells to authorized repair shops. thanks.


... Sanyo DP50747 50 in. Plasma TV

I have an LG 26LZ5RV TV. I have connected it from the RF output of my Sky+ box (using a coaxial cable) to the "Ant In" socket at the back of the TV. The RF output on the Sky box is set to Channel 35 and the power is on. I know that the output is working, as I have tested it on an old portable TV with manual tuning. My problem is that I cannot get my LG TV to tune in to the signal, using either auto or manual tuning. I have used System "I" and tried setting the Channel to 35 then searching b


... LG Flat Panel Televisions

Vizio VO370M will not power on. Vizio log stays yellow when power button pushed. Problem occurred following lightning storm, so suspecting the PS, but not certain. No physical damage apparent to either the PS or mainboard (fuse is good, no bulging/leaking caps, no burned spots, etc.). When testing PS, 5v connectors supply good 5.3v. 12v connectors have no power, but not certain if they always supply power or only when switched on. Is this more likely to be the PS or the mainboard? Would r


Did you ever finish the repair? ... Vizio VO370M LCD TV

Television Tv stuck in standby front led blinking only.Once the front led is blinking will not stop blinking by switching off with remote or side contol on tv. The only way is by removal of mains plug. Power supply used is Vestel 17ips10-3. Will change power board if this fault is caused by faulty board. Can anybody in the know confirm that the fault as explained is likely to be caused by a fault in power supply board.


... Flat Panel Televisions

Sansui SV-3715LCD, I switch off the unit at the wall socket, when I plugged it in the next day there was no power, not even the LED indicator light on the front of the LCD activates. I checked the plug power and it has AC supply voltage right up onto the internal Switch-mode power supply board. Any suggestions


Continue to check--every set has a standby power supply that powers the remote circuit to turn set on and it runs 7/24 if set is plugged in.Never a good idea to turn set of by taking the AC away--it can cause micro problems(micro processor). ... Flat Panel Televisions

I got a Sony Bravia KDL-40WL135. Blank screen. There's two LED lights: red standby and green power light. When I turn on the TV, green led comes on, then after about 30 seconds red led blinks once, then green resumes. The green led stays solid. I think that's a SONY error code, I tried to look it up but can't find anything useful. I have replaced the power supply, AU board, backlight inverter, logical board, and the second power supply board. Any suggestions? I haven't checked the t-con bo


Http://www.smpcshop.com/KDL-40WL135-KDL-46WL135-p-8895.html\015\012\015\012\015\012\015\012Above is a link for a service manual.\015\012 ... Flat Panel Televisions

My hitachi 29in ctv power supply 110vac had a problem on zener diode will blown if we switch on the tv. what spare parts to change so that the power supply zener diode will not blown again and the supply voltage remain in normal condition.


The secondary output voltage comes out from is more than it should be there. That is why, the protection zener diode blows off, as soon as you switch ON the set. First find and repair the power supply regulator, for correct output voltage. Refer i ... Hitachi Standard (CRT) Televisions

I have a Sanyo DP50747.. a friend of mine, who repairs electronics has looked at it and said that the power supply needs to be replaced. I was wondering if there's any way to repair a power supply? OR if there's any way I could use a power suppy from a different Sanyo model?


Check the fuse as described at the following web page:\015\012http://www.ifixit.com/Guide/Repair/Repairing-Sa ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2636 seconds