Having problems with your Flat Panel Televisions ?

Dp42sm got black line in the middle, i tried to open it and found one component part is busted but i dont know the name of the part , i took some pictures and if somebody could help me where to buy this small part. Thanks



Answers :

Likely the individual part is not sold---try to GOOGLE the model number with "boards" or parts to get the board.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Dp42sm got black line in the middle, i tried to open it and found one component part is busted but i dont know the name of the part , i took some pictures and if somebody could help me where to buy this small part. Thanks


Likely the individual part is not sold---try to GOOGLE the model number with "boards" or parts to get the board. ... Flat Panel Televisions

Hello all ! My 42 inch Daytek TV is broken. I tried everything to fix it but.... no success. I know which PCB is defective but i cannot find a replacement part for it. Daytek doesn't sell parts anymore (actually i think the company shut down) but there must be somebody who knows where to get these parts. PLEASE HELP !! the TV model is : DM-42A and the PCB i am looking for is; PLYM02: Thank you !


The main board the the 42A is no longer available. We have two of them here we're saving for parts and both need the main board. This is a common problem where the power regulator on the main board blows and something else on the same line shorts (ac ... Flat Panel Televisions

Help me with my Sharp 32LS400. Audio is good, but the picture is not clear and flickers. Can see the images, but is annoying. Just can't afford to buy a new one right now. I read somewhere you could Resolder flyback pins, but have no idea if that is right or how to do it. Your help is greatly appreciated. I promise to share your site with everyone I know if you can save my wife from buying a new flat screen! Rex Roberts


... Sharp 32L-S400 32" TV

I have a baird x47dtv and we turned it on today but had no picture or sound. the blue power light comes on and flickers as it should on startup of tv,however we are still not recieving a picture. i have replaced the psu's approx 6 months ago so i know theres no problems there,but am unsure which part i need to replace as it could be 1 of three things. 1 it could be the main board, 2 it could be the power invertors or 3 the screen. any tips would be helpful


Tried to disconnect first the supply voltage of the inverter board and then turn on the tv. if the indicator stay which mean the inverter board would be the cause of shut off or the tv turn to safety mode. ... Flat Panel Televisions

I have lg ru50pz61 plasma after turning on after ABOUT 20 MINS I LOSE HALF THE SRCEEN PICTURE IT STARTS TO JUMP THEN I HAVE LINES AND NO PICTURE YOU CAN SEE THEN AFTER ABOUT OTHER TEN MINS TH HOLD SCREEN DOES IT DOES ANY ONE KNOW WHAT COULD B THE ISSU AND PARTS I MIGHT NEED TO FIX THIDS THANK YOU FOR ALL UR HELP


If it's under warranty have it return to the supplier for replacement. It's hard to diagnose the problem without opening your TV. It could be the vertical IC that is usually a problem in most CRT. It's really hard to tell without scanning the board.\ ... LG Flat Panel Televisions

My audio for my Westinghouse vr4085df went out. I took it apart and I need to know which part controls the audio so I can replace it. It is not just the speakers either since I have surround sound and still not working. Any suggestions or answers would be helpful. Thank you


... Flat Panel Televisions

Where can I buy parts for my Norcent 3222? The picture is gone but sound is good. I may need a board or bulb, but don't know where to purchase. Thank you!


... Norcent Technologies LT-3222 32 in. LCD Television

Experiment greetings my name is rolly and i am interested in the purchase of some magnets. the problem i have is that i dont know the exact sizes and strength. thisis where i leave it to your expertise. the best example is in a video, the primer fields on peswiki, video part 1 time at 38:30 to 39:18. these are bowl magnets [permanate]. both north an south needed. the small magnet is cylindrical. four needed. so the order would be two bowl magnets a north and south with f


... EA Magnetics Standard (CRT) Televisions

Okay so I have a 50x39 inch RCA GEMSTAR Guide PLUS Gold HomeTheatre projection TV. I don't really know what the model number is, I am assuming XX15343-82A. First off, the picture is skewed and warped, second off it's dimming. I understand that the bulbs char up and go out over time, which is all well and good but I really just need to find out where to buy parts from and if this is the actual model number.There is another number as well xx15559-030. I have tried manual convergence, everything ar


Inside, there is a mirror glued to the back of your tv, the lapmps shine onto this, then it's reflected onto the front screen, it gets dusty, mine did, and I took the front off the tv and cleaned that mirror, VERY carefully. sometimes the mirrors com ... RCA Projection Televisions

SD Tech: Looks like your are the source for all things Samsung...I have a Samsung HL-R4226W that all of sudden started making that loud vibration/humming noise, and the picture started flashing pale, off color images of the show mostly in black and white. I shut it off before anything popped or stopped. Is this likely the color wheel? Any way to diagnose this for certain before I buy the part? Thanks in advance for the help - much appreciated.


It is definitely the color wheel. The flashing images and the wird colors confirm it. Replacing the color wheel should resolve the problem. As for the loud whirring noise, its due to wear and tear in the motor that spins the wheel. ... Flat Panel Televisions

My LG led has had several problems, it started out with the left half of the screen flipping as if viewed from a mirror with the right part of the screen normal. After that, it displayed vertical colored lines (blue, yellow, black, white, etc) which went away and now it shows a vertical bar about 4 inches across that looks darker than the rest of the picture. I also noticed images burning in everywhere except that bar. I know it's a lot of issues but any help would be appreciated.


This problems are a very tipical of the coded pixels on the LCD screen panel passes through the board that call the T-CON decoder board to causing this problems.Vertical colors lines display on the LCD screen panel happen by itself.Yes.The T-CON deco ... LG 32LE5300 Widescreen 32 in. HDTV

On my sony tv model KV-32FS100, the picture keeps going on and off every two or three minutes. The sound stays on though. Just want to know is it worth fixing or cheaper to buy a new TV?


This is an intermittent fault, due to some loose solder terminals. Check it. ... Sony FD Trinitron WEGA KV-32FS120 32" TV

LG 32LB9D Hi there, my name is felix and i just want to ask you for help, i changed already the bad capacipor on my lg 32lb9d but i still having the problem that i has to plug and unplug the power cable couple of time to have sound and picture on my tv or i have to leave it on for several minuts until warm up. could you tell some idea of what to do to fix the problem? thank you for your help. PS. if i desconnect one of the cable locate at the top right hand side and plug it back the picture and


... LG 32LB9D TV

I have a lg42pc3d plasma tv. its about 5 yrs old has worked just fine till last night the picture went out. Sound works but no picture. Have been on line and the consensus seems to be the x and/or z sustain boards and maybe also the control panel. Wanting to know if that is the problem and how do i check. Where are the best places to find the parts i need and the part numbers? thx


Yes usually the x and y sustain boards go. Not always with both fail, but they communicate with eachother...this is why replacing both is "good practice." You can check shopjimmy, ebay and encompass parts for parts online. Just order new replacements ... LG 42PC3D 42 in. Plasma Television

My dad cannot find the remote control for this Daewoo tv. The picture is small and there are black borders on either side. He turned the tv off and on again and it did not reset. He is in his 80's and my mom is bedridden, this is so important to them. They are in FL and I am in NJ trying to help them with everything I can. Please, I need your help! Isn't there something we can do to reset the picture to it's normal size?


Hi,You need tv remote to adjust picture size, there is no other option.Thanks. ... Daewoo DTQ-14N2FC 13" TV

Hi, I have searched all over internet and I think you are the only one who may exactly know whats the problem. I have a Toshiba Regza 37" which has no picture but sounds works perfect. The thing is if you really focus the picture is there but its too dull and dark to see it properly. Ive heard something about switching T-Con board.. please let me know which one of the boards is that(any sign or specific connection?) and where can I buy one? Thank you very much and best regards kamran


If you can see an image and it's OK - no distortions or corruption - then it's not an image problem, it's a backlighting problem. This means that the faulty part is not the T-con or any other board that works on the image, it's the inverter - the bo ... Flat Panel Televisions

I have a 60 Inc LCD led 120 hertz . sharp aquos . And I want to know what is the best settings for the picture? I tried adjusting it but it looks like a normal tv want to know the beat settings for picture on this tv? Please help me.


The best way to set up a TV such as yours without a calibration device is to get a high definition picture of someone's face on the screen and adjust the color, brightness and contrast until the face looks as life like as possible. ... Sharp Flat Panel Televisions

I have a Sony Grand Wega Projection TV model KF-WS60A1 which I bought several years ago in the Philippines. It was working perfectly then just one day, there was no power. I brought it to the Sony Service Center in the Philippines and they tried to source this part-- Parts no.: a-1077-026-a Parts descrption: MCB- F However, they said that they could no longer supply the part. I love this tv and would like to have this repaired. Would you know where I can buy this part. Hoping for your assi


Hi,Part number A1077026A seems invalid/ incorrect, please reconfirm part number.Thanks. ... Sony Grand WEGA KF60XBR800 60" Rear Projection Television

The picture in my tv is coming up as triple there is a green picture, a red picture and a blue picture and it gives it a 3D effect, the picture curves down in the centre. the make of my tv is LG and the model number is RT-39NZ40RB, can some one help me on this so i know what i should do thanks!!!


Please do us a favor and rate this solution after reading. Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are ... Samsung PCL541R 54" Rear Projection Television

BLANC SCREEN My 42" RCA LED47A55RS just went puff.. when I was watching a video. I don't get any picture. The screen is blank. If I leave it on for while it gets about 6 vertical white lines for about 1 minute and then its blank again. No sound either. Check for bad or burnt capacitors and other parts but everything looks good. The only board that smells bad is one near the speakers, lower part, a small boatd that has to connections going to the LCD screen. I checked for the part number but


... RCA Projection Televisions

My vizio p50hdm made a popping sound from the rear. Afterwards, the picture disappeared and tv screen was black (as if the power was off). Then within a minute the picture reappeared but looked real dull with a weird contrast. I disconnected power cord, turned off/on the tv, and the picture remains dull. Tv has been this way for almost a month. In order to repair, I have to pay an estimate of $600, including parts and labor. Please HELP!


The z-sustain board is bad. One of the the heat sinks on the board is cool to the touch. These had LG circuit boards and the number on the sticker, on the board, was a good LG part number. The part numbers were 6871QZH044A.Do a search on ... V, Inc. Vizio P50HD Plasma Television

JVC I'Art Pro the color's don't line up in the corners its like the red has a concave shape so there is a perfect picture in the middle but the corners are off, anyway what i need to know is how i can adjust this? the menu is not a lot of help." the normal adj. brightness etc..." i figure this is something i need to do mechanically in the rear of the unit or maybe replace something.any help would be great help. btw..... i did not get a remote with the TV. i will have it in a few days i


All projection TV sets have two very common problems. One is convergence ( 3D/Warped video or dead set) the other is CRT fluid ( Dull Video). Here are more details and solutions for both. ... JVC AV-56WP30 56" Rear Projection Television

My jvc iart 32'' tv picture has shrunked 4'' either sides , looks like a small pillow , plz help


Check its main power regulator section. The output voltage from the SMPS is low. ... JVC AV-27D305 27" TV

HI, Leader,MI philips Projection TV Model no.9P5511C102,Recently, i chance Convergence Parts(STK392-110,Now When i Make the adjust each POINT The arrow Donot Move in any side,And In The Botton Picture, Has The Short Arch Black Line, I Check The ALL Parts in The Convergence Board,With My Tester But i Cant Found Nothing Bad. Can You Help Me With This Problem. Again Thank So Much. aramos88


Replace the electrolytic and check for the low omhs resisters that have change in value. recheck the solder job, make make sure leads are not jumped. ... Philips Magnavox 9P6034C 60" Rear Projection Television

I took my Sony Wega KV32FS120 off my digital box and put it in a different room straight on the cable (without the box) I have picture, but when I start the TV I have sound when the picture kicks in the sound disappears. Does anybody know what the problem could be? I have tried all the sound settings


I have found that the input menu can cause a lot of problems. For example, if your cable box input setting was set to high def with a component (not a coposite cord) then that particular input is looking for two lines of audio into them--so a total o ... Sony FD Trinitron WEGA KV-32FS120 32" TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1878 seconds