Having problems with your Flat Panel Televisions ?

Le40a656 samsung tv - does not switch on immediately after being on stand-by. Red light responds to remote but nothing on the screen. Any help?



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Le40a656 samsung tv - does not switch on immediately after being on stand-by. Red light responds to remote but nothing on the screen. Any help?


... Flat Panel Televisions

What's your problem?my pioneer plasma tv pdp-434 has the green light on together with the red stand by one, and the green light light is on green on the reciever as well, but on the remote control


... Pioneer PureVision PDP-4340HD 43 in. Plasma HDTV

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

Hi I have just been given a hitachi 32pd300 plasma tv plugged all wires correctly but can not get the screen to come on what am i doing wrong? have a red light but nothing happens when I press the remote - could it be the remote as no red light being emitted when I press the buttons. Can I get it working without the remote?


... Flat Panel Televisions

Trutech plv16320vm tv/monitor, will not come on,when you plug it in you get a red stand by light ,when you press the power on button. it goes off and nothing happens. or after u plug it in and u get red stand by light just wait 2-3 mins and it goes off.. no power. only 1 or 2 years old please help


Are you still having problems with this?Please let me know.Thank You very much!\015\012 Tyler ... TruTech PLV16320 Television

Sony KDS-55A2000. bought 1/07. replaced bulb 2/08. gave tv to parents 11/10. worked fine until last week. 1 on screen message, temperature warning (they checked all vents-everything clear and 1' away from wall) then lamp going out message came across. red light blinked 4x and powered off. I ordered new lamp assy came in mail today. parents installed. green light came on then red light blinked 4x-nothing. parents don't have extra income and my financial help is limited. any easy fix solutions????


You will need to check the fans are all switching on when you turn the tv on, it might be one of the fan sensors that has gone bad, the tv wont turn on if it detects that the fans or a single fan is not working. I have not worked on this particular s ... Sony KDS55A2000 55" HDTV

I have a 42" LG flatscreen tv. The red light is shining in the bottom right hand corner and I put fresh batteries in the remote but the tv won't switch on. If I press the power button on the remote...nothing... if I press the power button on the TV.... nothing... Please help!!! Vaughan


... Projection Televisions

JVC LCD HD TV.Model LT32A4GASK. no picture and sound. My tv wont turn on.the power light turns on followed by the green light but the screen will not respond as if its no stand by.even if u use the power on on the remote control it does not respond


... Flat Panel Televisions

TX-P42S11B Hi there my Panasonic TX-P42S11B has just turned it's self off! The red light was still on as though it was on stand by. I tried turning it back on using the remote, it makes a hissing noise at the back of the tele then turns off. I've unplugged it all for over 10 mins and tried again, this time using the button on the tele, the same thing happens. The only thing I can tell you that might help is the red light is on and doing 5 flashes, then stops, then 5 flashes again! I hope what I


... Panasonic Standard (CRT) Televisions

My panasonic 1080i will not turn on. Hit the power button and the light starts flashing green but nothing happens. After about 20 seconds or so the light goes back to red and flashes. Nothing works on the remote now. I bought this from Sams club as a close out as it was the last one (floor model) and did not have the manual. Have not seen any solutions to this problem as of yet. Please Help! W have not TV and are paying for service now.


... Panasonic PT-50LC14 50" Rear Projection HDTV-Ready Television

I have Hitachi Ultravision model 46UX25K I was watching in the morning then I shut it down properly by remote control, after few hours I try to turn it on, nothing , no picture just dark screen, I can hear light noise from the back of the TV going on and off within seconds but that's all, when I push the power TV button on my remote control I see the power light goes on and off but no picture. Upon removing the back there is a red LED on a circuit board in the back that also goes on and off when


... Projection Televisions

While plugging in a D.V.D.s connection the unit stopped responding to the remote control or the manual controls under the front panel. It will not respond to anything except pulling the plug out of the power point. There are two lights on the front of the unit: a green one under what looks like a clock symbol and a red light on the right side of that.Any help would be appreciated!


Hello\015\012You haven't specified anything about the device you uses. Without its brand name and model number, how can I powt a solution to you? Please provide these to me by FixYa please. ... Flat Panel Televisions

I have a Polaroid 2611-TLXB TV that was manufactured in September 2007 and recently, I turned it on one night and there was no screen at all. The blue power light was on though and I could turn it on and off with the remote but still no screen. I tried unplugging it and plugging it back in but nothing changed. I checked the back and there is a red blinking light.


... Polaroid 2611-TLXB TV

I have a PowerPoint tv and DVD combo and have a PowerPoint remote I have a blank blue screen with a red lock in the bottom left corner after my daughter pressed some random buttons and nothing I can do is helping. I found a previous question like this but even though I have a PowerPoint remote I couldn't find the buttons mentioned. Any help would be greatly appreciated. SINEAD


... Combination Televisions

I have a PDP 503 mxe that when you switch it on the stand by red light comes on. when i then press the remote to switch it on the grenn light comes on for a few seconds then goes out. the screen fails to light up. any ideas.


That problem is usually have 2 causes..Its either power supply board or main board..Please take this steps on how to determine the problem:1. Open the back cover.2.\012 Check the power supply output...It should have 5vdc for the ... Pioneer PureVision PDP-503MXE 50 in. Plasma Television

I have a panasonic TH-50px70a a and its lost power? when i turn the power on, the red standby light is showing but nothing happens on screen, when i press the remote power buttons. the green like flickers but nothing happens.


... Panasonic TH-50PX70 50 in. Plasma TV

Hi there. my teco tv is not working. the red standby light is on and when operated by remote or manual the green led light comes on and the TECO sign but nothing else works after and im left with a blank screen. Teco lcd tv Model: TA4296RV Serial no: MZ083C040165


... Flat Panel Televisions

Hi there. my teco tv is now working. the red standby light is on and when operated either by remote or manual the green led light comes on and the TECO sign but nothing else works after and im left with a blank screen. Teco lcd tv Model: TA4296RV Serial no: MZ083C040165


... Flat Panel Televisions

Hi, i have a 42inch Dynex Flat Screen, the issue i have is that when i plug in my Tv, the little red indicator comes on showing that its ready to be powered up, but when i push the Power button the Blue indicator comes on but there is no picture and no sound, the screen does not light up and nothing is displayed when i press the volume, channel and menu buttons, how can i figure out what is wrong? I hope its just replacing a blown fuse or something, Can u help?


I will give you some general info and some ideas--let me know what you find or if you have questions.I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby chec ... Flat Panel Televisions

I recently purchased a used Pioneer Pro150FD and was told it worked. Now that I have plugged it in, I get a clicking that the power is on, but there is nothing coming on the screen. I also see a small red light illuminating from within (through the back panel) when the power is switched on. I am using a "osiris" remote that came with it and the control says "PIONR" but the switch doesno't work. I have installed new batteries in the remote. Any thoughts?


... Pioneer PRO-150FD 60 in. HDTV-Ready Plasma TV

Samsung PN50B450B1DXZA will not power up. When I try to power it on, it makes a clicking sound and then nothing for 10-15 seconds and another clicking sound. The Red LED on the front flashes when it clicks but nothing ever appears on the screen. I removed the back of the TV and inspected Capacitors but do not see any that look to be bulging. When I try to power it on with the back off, I see a green light quickly flash on a logic board just below the power supply board. Are these clues helpful


... Samsung HP-R4262 42 in. Plasma Television

I somehow locked the keys in the option menu, now I can't get the screen on at all. Light is red, when pressing the power button it becomes blue for a few seconds, then back to red, with nothing e


What is the brand name to your TV? ... Standard (CRT) Televisions

We had a power surge other evening due to lightning storm. Samsung LCD TV was on surge protector and everything else on surge protector is fine. But red light comes on on TV when plugged in but no response from remote, no picture, no sound, nothing. Checked capacitors and no bulging or leaking from hem. Help please. TV only 14 months old.


The first thing (after unplugging the set) to check is whether you have a shorted diode in the main power section of the power supply. Test each diode with an ohmmeter to verify it conducts in only one direction. I assume from the red light that Stan ... Samsung 52 in. Flat-Panel LCD HDTV

My flat screen panasonic tv slid and fell to the ground hitting on the left corner, it wont turn on at all or respond by remote, ive unplugged it and it wont light up either, help!


In most cases this is the end of the set, only a inspection by a tech or a shop would answer this but it takes very little to destroy the screen unit inside and that part would cost alone more than another set. ... Panasonic Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2685 seconds