Having problems with your Flat Panel Televisions ?

I have a Westinghouse LTV-32w6HD that has no picture but faint multicolor vertical lines that change according to the input (the lines change as the picture would normally change). I'm on HDMI input but have tried other INPUTs as well with no differences between them. Sound is OK. Remote works. Set powers up normally- just no picture. Where do I start? A schematic with voltages would be nice!



Answers :

Two possible causes for that problem..
1- T-Con board that drives lcd panel (screen) is bad and need to be replaced.
2- LCD Panel (screen) itself is bad and replacement may cost you more than tv worth.

Schematics in service manual would not help you for that problem because service manual of lcd tv wont give much details, volt readings info.
Hope this will help, let me know if there is additional question.
Thanks.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Westinghouse LTV-32w6HD that has no picture but faint multicolor vertical lines that change according to the input (the lines change as the picture would normally change). I'm on HDMI input but have tried other INPUTs as well with no differences between them. Sound is OK. Remote works. Set powers up normally- just no picture. Where do I start? A schematic with voltages would be nice!


Two possible causes for that problem..1- T-Con board that drives lcd panel (screen) is bad and need to be replaced.2- LCD Panel (screen) itself is bad and replacement may cost you more than tv worth.Schematics in service manua ... Flat Panel Televisions

No signal The initial screen says No Signal and when I try to change channel the channel number displays 65535 followed by a line of yyyyy where you would normally see the program. The TV worked last night and this morning was turned on by a teenager - I am not sure if he has accidentally pushed a wrong button.


Locate the Reset button near to the power button.If you do not see go to the Menu scroll untill you see reset all things.God bless you ... Toshiba REGZA 42 in. Flat-Panel LCD HDTV

50" Plasma Hi Hopeing some can help got up to put tv on this morning and found i have no picture but sound on the tv, i am unabe to use remote and change the input on tv also connot put volume up or down, I have phoned Lg and the answer i got was he had worked for two years at LG but never came across this model??????? advised me to call domestic and general as they would help , phoned domesctic and general and they were unabe to help 1. cause they only do warranty plans and she was unable to


Just replace the y sustain ... LG 50PC1DRA 50 in. Plasma Television

Sylvania LC260SC8 LCD TV has no picture. It displays white & black vertical lines on the middle to left had side of the TV. Audio still works fine. I swapped out HDMI cables, tried using the component inputs, hooked the co-ax to the TV instead of the cable box, tried 2 different video inputs all with the same issue - no picture, only audio works. Is there something that can be done to fix the TV? I love this TV. It's only 3 years old. Thanks for the help.


... Sylvania LC320SS8 32 in. LCD Television

About 8 months ago, every time I turned on the TV (SK-26H590D), only vertical lines would appears... almost like watercolor: green, orange, etc. However, you could hear the channels and change them as well... but still no picture at first. The the channel would come on after about 5-10 minutes. This has gone on since then. Almost as if the TV needs to "warm up." Today, only the vertical lines appeared but the tv never came on all day... just the voice. And the channels can be changed, but no pic


Hello\015\012Get into Menu Operations and come to the window video reset. You can get this in its manual section [1-6]. Reset all video sub menu items to factory reset. Check out after this reset process whether the problem solves or not. If ... Westinghouse SK-26H590D Television

Possibly did something in settings, as tv wont pick up signal on any input. it stared with my hdmi input....one day my sons ps3 no longer would work on tv. I figured hdmi input went out after I tried changing every setting in the input mode. Cable and wii still worked fine. one night I went to turn his tv off and hit wrong button. from that night on tv wont pick up signal on any input. No cable at all. Actually have cable coax, not hdmi for cable


... Haier HLH32ATBB 32 in. LCD HDTV

My tv is a HDLCD3200A. The tv would work fine and out of the blue sky, the picture would start with virtical lines and go black and loss of audio. Now it wont come back to life. What do you think a po


... Sansui HDLCD-3212 32 in. LCD TV

Cs-21Z57ML samsung TV some problem in this TV all the component it work normal,sound and tuning search system it work in normal condition but not display picture,I am try by changing the tuning system but not solve the problem.please how to solve this problem?


... Samsung Standard (CRT) Televisions

I have no picture but have audio. Problem occurs AFTER playing games on a Sony Playstation. After you get done and switch from the Input from the Playstation to Digital TV you get a blank screen. If you do not change inputs and just watch TV the problem does not occur. When this first started happening if you hit the side of the TV the picture would come back. Now its gone for good. TV is only a few years old.


Hi jgslote,\015\012\015\012This is an indication of bad solder joints in the I/O board section where the DTV cable connected. You have to re-solder this cold/dry/crack solder to cure the symptom. This is hard to spot, I would advice you to work ... Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

Cs-21Z57ML samsung TV some problem in this TV all the component it work normal,sound and tuning search system it work in normal condition but not display picture,I am try by changing the tuning system but not solve the problem.please how to solve this problem?


... Standard (CRT) Televisions

I have a Hitachi 42PD5000 with a digital box connected gives normal TV picture thru RGB connections. However an connection from paytv box to TV aerial input now gives sound but no picture. Worked Ok before. Tried connecting thru other AV inputs but no joy.Any clues?


... Hitachi Flat Panel Televisions

Sp-R4212 Plasma no picture keeps changing channels when you go to the menu the menu keeps rolling won't stop if I unplug the set for a few days you can go to setup and get it to work I had Sears out to fix it and they disconnected the side buttons. That did not work. they said it would not work. I have had it working for over a year now. But it keeps doing the same thing about every three months.


When the menu starts rolling, take the remote out of the room to see if it's the remote causing the problem.if it's not, check for bad capacitors on the boards.There's a good chance you have failing electrolytic capacitors eit ... Samsung HP-T4254 42 in. Plasma Television

My plasma has sound, picture is there but composed only of vertical lines and one horizontal line about two inches from the top. If I switch to an input that has nothing connected to it the lines go a


... JVC PD-42V475 42 in. HD-Ready Plasma Television

I have a toshiba 52hm84 I just recenlty put in a new bulb and it has been working great. today I turned on the television and would get a good picture for about 1-2 seconds and then the screen would go black. I would change the channel and onlly get sound. Any ideas on what the problem might be?


Make sure the bulb door is secure..if not it will shut down the bulb ... Toshiba TheaterWide 52HM84 52" Rear Projection HDTV-Ready Television

We have a single horizontal line that is present on our sony kdl40s3000 regardless of input or channel. We are wondering what the cause might be and if it is worth a repair or if it will be best to consider replacement. The line tends to be multi-colored and thin. The colors of the line may change with the picture displayed on the screen.


... Sony KDL-40S3000 40 in. LCD HDTV

My LG 42LM620T Led tv has sound but no picture, what could be wrong.? One day, while watching TV suddenly the picture went off, but there was still sound. Thought I might have pressed some thing remote, tried all options but nothing worked. Switched off, removed the plug but still no change. When switched on I get LG log and picture for a second and then goes off, only sound stays. Tried with different inputs still the same. When flashed light on the screen I could see faint images. Opened up th


... LG 42LM6200 42 in. 3D LCD HD Cinema Smart TV

I programmed my sudden link remote to my tv and turns my tv on an off, controls the volume, but when I try to change the channel of my television with the remote, the red cable light on the remote lights up as if it thinks I'm trying to tell it to change the channel on the sudden link channels and not the channels of my tv....help? (I know this sounds lazy because normally people would just say get up and change the channel but our tv buttons don't work and I don't have the original remote)


... Flat Panel Televisions

Sharp Aquos, Model - LC-65D64U. multiple lines on screen power up and with any display. Is the screen done or can it be repaired via internal componets? no history of TV as it is new to me. lines run from one end to near other and taper towards bottom. screen picture changes but lines remain. any knowledge would be appreciated.


... Samsung Flat Panel Televisions

When switched on the sound is OK, but on the screen are seen only coloured vertical lines not very bright. Found blown capacitor 2200uF/10v from power supply board +5.4v. Changed it ,but nothing. The inverter is OK. After disconecting CN503 and turning on the TV the screen is dark,the bach lights are on and no vertical lines are seen. This problem ocured when the TV was working and the picture was good.


... Samsung LE27S73 27 in. HDTV-Ready LCD TV

I have a Sony KDL-46S4100 LCD that was given to me that doesn't work. It powers on and the power LED is green and the backlight to the tv works and stays on as well but I get no picture or on screen display such as the menu. I can hear sound from the speakers when the input is set to the correct one. I purchased a replacement T-CON board but the problem persists. If I do the LVDS cable wiggle test I can see noise come up on the panel. It varies from vertical lines of different colors to whe


... Sony KDL-46S4100 46 in. LCD TV

I am trying to hook up a gamecube to a toshiba tv. I don't know the model number but it has 3 inputs in the back and one in the front. I have tried all of them and tried changing the input on the tv to one of them but it only stays on tv. I don't have channel 3 and I don't know how to add it. I have unplugged the cable cord also seeing if that would work and nothing. Please help.


... Toshiba Flat Panel Televisions

My zenith 36 inch tube tv turns purple we would tap it in back and it has a great picture, also we could turn it off and on and it would return to the normal color, however it has been turning purple and the tapping and the on and off will not work all the time......my son gave it to us since he had to transfer to another town and this tv is really heavy to move to his two story appartment....HELP


This problem is from soldier joints enless you have worked on tv, you can take it to an electronics shop where they can repair it for you. ... Zenith Projection Televisions

Hi. Lately my tv is turning on but once the video signal is recognized, the screen goes green with vertical lines. Then the set turns off, turns back on, and then I may see a picture but the colors and images are all distorted. After about 5 min of off and on, it would finally correct itself. It does this with any input such as my xbox and dtv. Now it is at the point where it keeps trying to turn itself on and off to seemingly correct the input signal. Each time I may get a green screen, blac


This is a foreign voltage issue. It's very high voltage with minimal current. Milliamps to say the least. It is not dangerous. The only way to test for this voltage is with a foreign voltage tester that low volt techs and electricians use to iden ... Samsung LN46A550 LCD TV

THE PICTURE IS ZOOMED IN, SO HOW WOULD I CHANGE THE PICTURE TO NORMAL? THE TV ISMODEL # HD52W59


Ok, my answer to this kind of question is always goto factory defaults, in your main menu.\012Once you get to factory defaults, just press " Factory Defaults.." if you r ask for a pass try 0000.\012 hope this helps.. ... RCA HD52W59 HDTV Projection Television

Tedelex tv ec2135 picture is fine for a while then changes to a horizontal silver line i tap it on side of casing then picture returns to normal again please help


... Standard (CRT) Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1638 seconds