Having problems with your Flat Panel Televisions ?

Just purchased Samsung LCD TV # LN32D430G3DXZA what are the recomended picture setting , pic mode contrast , brightness,etc ...rather then just going off the factory defaultsAlso adjusting the picture, we have re-set it but it is coming back to the screen that people appear BIG and have crooked legs, and the heads are partialy cut-off



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Just purchased Samsung LCD TV # LN32D430G3DXZA what are the recomended picture setting , pic mode contrast , brightness,etc ...rather then just going off the factory defaultsAlso adjusting the picture, we have re-set it but it is coming back to the screen that people appear BIG and have crooked legs, and the heads are partialy cut-off


... Flat Panel Televisions

I have an insignia ns ltdvd26 lcd tv. The problem i am having is the picture. When i turn the tv on... the picture is normal...then display freezes and slowly the picture will fade to black. If i leave the set on....occassionally the picture will come back on for a few seconds then fade to black again. The backlight still appears to be on when the screen fades out.


Good day!If your problem is pictures fade on and off...There are some points to consider like \015\012\015\012loose connectors on the power supply,main boards and inverter board ----reconnect a ... Insignia NSLTDVD26 LCD TV

When I turn on my WS65611 rear projector TV the picture comes on perfect but after a minute it starts going static then the picture will come back on then it goes stactic. This continues for as long as the TV is on. When I get the menu to appear on the screen, the picture will stay perfect,, however the menu screen is in front of the picture.


A few things you could and should try, try something on a different input if you are using the coax connection just to know if problem exists that way, could be a bad tuner but that can be got around, also if on all inputs the set does have a hard r ... Mitsubishi WS-65611 65" Rear Projection Television

Lost picture Lately,after about an hr1/2 the picture suddenly disappears. I still have sound but the screen goes black.. no warning, just picture gone. new batteries in the remote. I shut the system down (set top box&tv) then turn it back on and so far the picture's been coming back. I've had the set since '05.I'd appreciate your input. Thanks.


Try unplugging everything and then plugging it back in. When my xbox had the "ring of fire" my brother asked me to fix it and I just unplugged and re plugged it worked and came back to life. (be careful that you either have the instuction menu for se ... Protron PLTV3250 32 in. LCD Television

I have a Sharp AQUOS LC-26DV22U 26 in. LCD TV with a built in DVD. When I turn the TV on it will come on as it usually does (the please wait appears in the lower left corner and moments later in the right hand corner the channel box appears and then the picture comes on) and after about 30 - 45 seconds the screen goes blank, the audio stays on and I can change the channels with no picture. When I turn the TV off and wait a couple seconds and turn it back on the "please wait" that appears in the


... Sharp AQUOS LC-26DV22U 26" LCD TV

Sanyo 24 in flat screen model DS24425 Screen slowly goes fussy and slowly goes black , a slight tap on the rear left side brings the picture back to good screen,for a few minutes or a couple of hours no set pattern of time. When one turns the set on again some times come on clear other times very dul or black, slight tap and good screen. Sounds /act like a bad solder connection but which one do you have a wiring diagram or know where to get one? Thank you


Hello\015\012Your flat panel TVs picture tube base board has soldering loose contact with it. Just unplug your TV from AC mains socket, and open it. Pull out the picture tube base card from the picture tube neck. Pull it out straight, no sha ... Toshiba 55ZV650U 55 in. LCD HDTV

KDL-32S3000 Problem. We broke remote, so got a new one coming. However, The screen will be normal for 15 seconds or so and then a black bar will appear at top. On the left top of the black bar it will display the input in use "HDMI 1". To the right just under the bar #In the picture# it displays the picture mode "16:9 1080i HD". On the left 3/4 of the way down the screen it displays "Power Saving: Low". After about 15 seconds the screen will refresh and go back to its regular full screen. This k


Its asking you to adjust power on the main power box it sould be under power saver adjust level it to low it should be in your menue and then your main power setings. ... Sony Flat Panel Televisions

My kdl55nx810 screen is blinking. While watching TV, the screen will go black for about 2 seconds, then come back on. It appears to happen intermittenly, every 15, 30, or 60 seconds. TV was working fine, when I went into the menu and adjusted the motionflow. I ended up returning TV to the original setting. When I started watching TV (after returning to original setting), the problem started. The TV does not turn off, but the screen goes black temporarily. Any help would be appreciated, thank


This problems,it can't be repair.The tv Tuner signal board is problems and the the causes.The tv Tuner signal board have intermittent problems.That the board,where the tv incomming signal cable plug into it.Tv is still useable wright?Use it the tv as ... Sony Kdl-55hx701 54.6 in. HDTV LCD TV

Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,


Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ... Vizio VT470M 47 in. TV

When I turn on the set, the right half of the screen is distorted. It flickers, different colors move from center to far right of screen, double images that appear as negitives and sometimes that half of the screen is very dark. Sometimes it will clear up for a second or two then go back to the problem. When the problem first started, it only lasted for approx 10-15 minutes then the picture was great. Now it takes 1-2 hours for it to clear up. Once it clears, I get a great picture. The lef


Hi,Symptom shows problem with lcd panel (screen) however, t-con board that is part of lcd panel could be defective and cause of these symptoms.T-Con board is located at top center of cld panel at rear and would be covered with metal shiel ... Samsung LN46A550 LCD TV

I have a JVC HD-ILA HD-61Z575. The color engine was replaced under warranty a few years ago. Recently, I started noticing some color artifacts in the picture... basically in a dark picture, you can notice red, green, or yellow stars randomly on the screen. If I turn the TV off and back on, they usually go away and don't come back until the set has been off for a while. I tried cleaning out the bulb area and that didn't affect the issue. I've also yet to have to replace the bulb in the tv,


I only have bad news for you. This tv uses an engine assembly. It is impossible to replace the color wheel only. The entire assembly is quite expensive and wouldn't be worth replacing for a tv of that age. (By expensive, I mean roughly $400-$600, bef ... JVC HD-56FB97 HDTV

My Sony KDL-40XBR7 has developed two problems. 1) Sometimes when changing channels the screen turns green. I can solve this by turning off the set then back on, but what's causing the problem? 2) In the past few days whenever I turn the TV on there are horizontal bands from top to bottom. They are faint and the picture can still be seen. Additionally the picture is ghosted; a second ghost image appears larger and below the original. This lasts for a few minutes then goes away. Of course, the TV


... Flat Panel Televisions

I moved my samsung SPP4251AX/XAA flat screen tv to a new location. I had the cable un hooked and the power off for 2 days. When I hooked the cable back up to the tv the picture will not come on. I have tried everything I can think of from the set up menu and the screen is still fuzz.


... Samsung Flat Panel Televisions

My screen is blank and I have a chirping noise coming from the set after a power outage. I unplugged the set for ten minutes and plugged it back into the "wall socket" and still no picture. Help! Nick


Common problem..you can get a repair kit from www.TvRepairKits.com ... Philips 55PW9363 55" Rear Projection HDTV-Ready Television

Hln617wx-xaa- picture on the screen freezes into a black/white image of what was showing on the screen. with no blinking LEDs, yet. I turn off the tv, then turn it back on. thats when the LEDs come


... Samsung Projection Televisions

I have a 22 inch AOC Envision LCD TV. When I first turn it on, only the top half of the screen displays picture while the bottom half is a gray/black color. If I wait about ten minutes or if I tap on the back of the TV, the picture is completely restored and I can watch everything just fine. However, it is pretty annoying to wait for the picture to come back. Since the picture does come back after a while and looks fine, I don't think I have a broken backlight or anything like that. Also, becaus


There is some loose solder terminals at the vertical scan output section at printed circuit board. If you are handy in electronic circuit boards, loacate the vertical output section, resolder all the suspected solder terminals there. This must sure ... Standard (CRT) Televisions

On my HD1080 Mitsubishi projection flat screen the picture is bowed on top and bottem and it look as if the projectors themselves are offset, but the picture is clearer as you come toward the center. If I smack the side the picture will sometimes come back into focus. But the picture will soon after go back out of focus and sharp swiggly lines streak across horizonally. How can I fix this problem and how much might it cost.


You have poor contacts and or dry joints. Resoldering on the convergeance panel and powersupply/line timebase board will probably fix it.It should take less than an hour in labour terms. ... Mitsubishi WS-65809 65" Rear Projection Television

My rca r52wm24 Tv turns on but after about 20 minutes the screen goes black but I still have sound. Sometimes the picture will come back up and work fine after 10-30 minutes but it will go to black screen again. Then sometimes the picture will be fine for around 20 min utes agin flash to black then flash right back to normal. rnWhennthe screen does go to black it slowley fades out takes about 10 seconds to go black


Hi mcpheeters16,\015\012\015\012First to isolate the loose connection from fault, check the cable connectors from the lamp and the ballast board. Pull-out the cables and then re-insert. Also check the ballast board from bad solder joints (crack ... RCA R52WM24 52" HDTV Projection Television

My mother hit a botton and doesnt know what see hit but she last picture and volume. she unpluged tv and pluged it back in the picture came back but no volume. she said a black and gray screen had come up just before this happend it said that volume may be interupted, she ment to cancel out of the screen but instead went through the screen instead


She may have hit the SAP or MUTE button on the remote. ... Flat Panel Televisions

I have a RDVR90VE Sylvania combo VCR/DVD player/recorder. It is presently set up with a CT-27HL14 Panasonic HDTV. When playing the VCR the picture comes through beautifully. When switching to DVD the picture initially comes on for approximately 5 seconds then a huge black box comes on in the middle of the screen with only the top, bottom and sides of screen showing image. What really makes this a mystery is that when the VCR/DVD were connected to a 19PFL3504D Philips TV the DVD worked fine. Do h


Hi -\015\012\015\012\015\012I hope you read my other message. You need to make sure closed captions / subtitles are switched off on both the your TV and the DVD/VCR. I'd suggest starting with the Panasonic TV.\015\012\015\012\ ... Flat Panel Televisions

I have a Samsung TV model LN40C530F and I have 2 problems with it. 1. Suddenly, the sound rises for a few minutes and it comes back at the initial level. It can happen several times during a program. 2 . Every time when I switch from HD channels into analogical channels, the picture moves to the right about 2 inches. I have to look out in the settings and make an image test so, the picture comes back central. I called Samsung customer service and they told me the problem was coming from the sign


This happens a lot. I would blame the tv itself. I've worked on samsungs with faulty CCFL lamps, faulty backlight inverters....faulty mainboards ETC. I believe this is a video signal issue going from digital to analog which corrilates with the tuner ... Samsung LN40C530 TV

Bush tv, screen has gone blank with no sound or picture. Fuzzy noise in the back ground. Sometimes takes up half hour to come on but today no noise / no picture just blank screen, any advise on the is


I think it is Time for a NEW TV. Not worth the money to repair. If it is under warranty, have the work done but other than that, you are wasting your money ... Standard (CRT) Televisions

Picture preset mode on rca projection comes on screen and won,t go off no matter what buttons i push.after about 20 min. it will go off and the come right back on screen and it starts flashing all kin


... RCA M50WH72S TV Lamp with Housing

Hi. I have a problem with my 42 inch plasma tv,when tv is turned on green L.E.D appears on bottom right and tv works as normal.After 40 minutes to an hour tv makes click sound and screen goes blank the green L.E.D changes to red on the bottom right there is still power going to the tv hence the red L.E.D.Then when i plug it out and plug it back in red L.E.D appears but screen remains off it stays like this for 3 to 4 hours before tv comes back on and the same is repeated again after 40 minute


Hello,\012\012A common problem for these is bad capacitors in the power supply, Remove the back from your Tv and look at the power supply on the left hand side.\012\012You will see roughly around 9 x capacitors that are bulged / domed shaped on ... Projection Televisions

My 50inch vizio p50hdtv20a that was bought in 2008 is no longer working. It has no picture, but does have sound and obviously still has power. I need to know how i can fix this myself. If its a fuse thats gone out or what i need in order to make the picture come back on. Has there been any recalls on this exact model tv i have possibly? This is the second problem i've had with a 3yo tv set that should be in perfect working conditions. Theres a green light on the back of the set that reads LED+20


How much time does it blink?it can be your video model.i am not too familiar with that set.but the module is on the right side of the set as you open the back.the whole of the module has to be replaced. ... Vizio P50HDTV20A 50 in. Plasma HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5757 seconds