Having problems with your Flat Panel Televisions ?

DVD144RC TV has stopped working, no standby light. TV just shut down whilst my son was playing his Xbox. I have tried fitting a new fuse to the plug but this has not solved the problem.



Answers :

Usually means a fried power board and/or inverter board.
not user serviceable

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

DVD144RC TV has stopped working, no standby light. TV just shut down whilst my son was playing his Xbox. I have tried fitting a new fuse to the plug but this has not solved the problem.


Usually means a fried power board and/or inverter board.not user serviceable ... Flat Panel Televisions

My tv model sony trinitron KV2192M3 suddenly turned off and remained with a hissing sound.I then replaced FBT and the problem seems to be solved but after one month same problem occured, this time it was not FBT but i noticed protection fuse N25 from B+ and fusable resistor near fly back which is connected to 200v supply to G1 control grid is blown off. After replacing these fuses FBT tuned on but there was excessive brightness on the tv screen with sound ok and after little while tv turned off


Hello, First appreciate your work that you done yet, Secondly, According to the symptom please check the given two solutions:1- Check At FBT ABL resistance value .47ohm find and replace it.2- At C Board mounted on the ... Flat Panel Televisions

I just got a new player. Worked perfectly in the shop but brought it home and have a problem. After plugging it in it plays the DVD fine EXCEPT, the picture is in black and white. This was not a problem with my old player. I tried 8 DVD's with the same results. The color is great on the TV. I tried three different lines with the same results.


Select the type of video your TV requires within the menu of the DVD player and match it.If the TV requires CVBS input and you are supplying S-Video, then you will get a monochrome picture because the chroma content is not being used.Hope ... Flat Panel Televisions

Cs-21Z57ML samsung TV some problem in this TV all the component it work normal,sound and tuning search system it work in normal condition but not display picture,I am try by changing the tuning system but not solve the problem.please how to solve this problem?


... Samsung Standard (CRT) Televisions

Cs-21Z57ML samsung TV some problem in this TV all the component it work normal,sound and tuning search system it work in normal condition but not display picture,I am try by changing the tuning system but not solve the problem.please how to solve this problem?


... Standard (CRT) Televisions

I have a fuse problem it went out after 2 years and put a new 1 in it lasted 5 mo. anouther new 1 it lasted three weeks. Can i put in a stronger fuse?


If a fuse is blowing, it's usually caused by a short somewhere and is intended to prevent further damage or a potential electrical fire. It's generally safe to use a fuse rated for ~10% more current, but if it still blows out, I'd recommend taking i ... Vizio P50HDTV20A 50 in. Plasma HDTV

32" technika sky red eye picture is perfect remote works perfect but after 10 to 15 mins picture flicks of for a second then on again this happens randomly . Red eye works fine have installed loads of these red eyes an never a problem. Checked end at coax ok changed coax problem still happening. Try old style tv working fine. Noticed on back of tv were red eye goes in 5volts DC never seen this on any previous TVs when fitting. Sky rf outlet 9 volts could this b causing my problem. Can't think of


Log in new account ... Flat Panel Televisions

Surge problem? I have a Samsung LN40C530 LCD TV and when I plug in and turn on anything that pulls alot of power ( Vaccum,Iron, Perkulator coffee pot)into a wall plug on the same circurt my tv goes blank and soundless for a minute and then back on. It has always been plugged into surge protectors and I have tried a new one, same problem. Also plugged a different TV into the same plug and no problems. I have had this TV for about 3 years now and this just started happening. Thanks for your help i


Try plugging vaccum or what ever you are using into a different plug that is not on the same circuit and see if it still does it. I had a heater and microwave plug into same circuit and it would blow the circuit. I had to find another circuit. Rememb ... Samsung LN40C530 TV

I have recently bought a sharp aquos lc 40 le811e tv set,im havin problems tuning it i have a new antenna installed and when i try and auto tune it says there is no signal,i have also tried 2 differant types of portable antenna made for digital tv and still nothin works,cos of this i have to continue using my digi box although the tv has built in freeview,also cos of this i cant use most of the features on the tv set,i have tried so many times to tune it but still nothing works,could u tell me w


Does it have a built in digital tuner? unplug wait 5 minutes hold power button while you plug it in you should get into a secret menu usd by techs look and see if you have a digital tuner hope that way works for that set ... Sharp Flat Panel Televisions

Samsung p6163wx - lamp sign flashing with a loud noise fan on, no picture. Replaced with a new bulb - did not solve the problem


This set may use a color wheel if it has a lamp. A bad color wheel will make a fan like or high pitched sound.If the wheel actually shatters (it can) the set will not function and will turn the lamp off.See photo of color wheel and i ... Samsung Projection Televisions

I have a new HP Envy m6 laptop. I am trying to hook it up to my Emerson 32 in TV. (model # LC320EM9) via an hdmi cable. The video comes up no problem, but the sound doesn't work at all. It doesn&#


... Emerson LC320EM9 32 in. LCD HDTV

I have changed out the H.O.T. and the flyback on my R52WH74 model tv because it wouldnt come on and it would make a chirping noise I checked all the fuses and capacitors now with the new parts in the green power button light comes on for about 2 seconds and then goes off with a low pitch chirp it does this 3 times and then nothing i checked all fuses and capacitors again and found that 3 are not responding one is cp049, rp050 and cp050 could thiese be my problem or is it something else?


... RCA R52WH73 Projection Television

When I plug in my JVC LT-24DK3BJ television, the blue power light comes on and remains solid, but there is no picture or sound. I have tried all sorts of things to try and solve the problem, but nothing has any effect whatsoever. Is there a way to reset the tv or anything like that?


... JVC DT-V24L3DU 24 in. LCD TV

Help i have a problem on my LA32C450, when i turn on the power,volume was up and up.The lamp indicator was blinking and display appearing volume graphic.And it can't be turn of.I try to change the remote control to control but its not working.Can anyone solve my problem ??


The volume up button on the set is likely bad (may look ok) Someone needs to open set and disable (unsolder) that switch.With ANY of the front buttons bad in this way remote or other front controls usually will not work--No magic wand wil ... Samsung Flat Panel Televisions

Replaced convergence fuse , resoldered flyback terminals..originally when tv went out it would not come back on..the power green light would blink a couple times then nothing..but finally TV came on..and showed convergence problem...after replacing suggested convergence fuse by tvrepair.com tried powering on the tv and the green power light blinks a couple times and shuts tv down...u can here a click ..but no picture. any suggestions?


Persistence pays off! What you found is very common and yes these sets are not real well made--good for you! ... Projection Televisions

Hi, there is l LG airconditioners MPS Variable model no: L8UC1508FA1. On site, these machines had a problem to burn fuse and printed circuit board (PCB) always.. but power supply is normally 1phase and 3phase are okay! Can u help me how to solve the problem? Thanks!


... Flat Panel Televisions

I purchased an LCD Projection TV in November of 2007. Model no#KDF-50E3000, Serial No 8701626. I started having problems with it recently. It wont stay on. It turns itself off and then on again(the process takes about 30 seconds or more every time.)Does it every few minutes now. I have plugged it into a different socket and tried a brand new surge protector but nothing changed. This has been going on for 5 days now. I was hoping you might be able to help me with this problem. Have you heard


You have problem on power supply section.In most cases regulator ic and ic Mcz3001 is faulty. you need to replace these ic. ... Sony Projection Televisions

I have a LG RT-54NA61RB rear projection tv a nd the coluors are ghosting over each other. I have tried the auto convergence but this does not fix the problem. Is there any way to solve this problem.


Very well known problem, the convergence circuits have failed. At this address\012\012\012https://spares.bigwarehouse.com.au/index.php?cPath=24759_24854_24863you will find the schematic and the parts: 2 STK circuits, the 4 power resistors ... Flat Panel Televisions

My Samsung hdtv model LN46B650 has a hazy screen with vertical thin lines running from top to bottom. These thin colored lines move and change colors. Some get wider then thinner. I have tried replacing the T-con board but that didn't solve the problem. Any ideas what is causing the problem. Thanks.


You should download the PDF and learn what the T-CON/LCD panel failure can do to what you see on the screen.\012\012 ... Samsung Flat Panel Televisions

Hi, i don't speak english but i try to say my problem: i have a sharp aquos tv but no power on i think the problem is the sg7006 ( fuse or diode ) i don not what is i need a number for this piece to buy other one to replace


... Sharp LC-37D43U Television

Have been trying to access menu setup from mt phlips tv model 17ht3402/67r but still not able..have tried with the codes 319753mute doesnt work,what can be the problem?and how may solve it?


... Philips 20PT6441 20" TV

Mitsubishi WS55711 TV. 'm OK with a a soldering iron and have done similar repairs in the past but I'm far from an expert. I had a convergence problem and have installed a new convergence chip and replaced two bad resistors. First time I reconnected the set came on but the convergence screens didn't show the grids. I discovered I missed connecting a wire and tried again. Got the grid but had two problems: 1) I could align all but the top and bottom right corners which remained prett


Since you said replaced a chip, I presume it was the one STK-393-110 which is used in some models--most of their sets use two chips------I know these sets very well.I have a offer for you---if you have Yahoo IM we can chat there and ... Projection Televisions

When power supply to TV exceeds 224V the TV switch off. It then tries to switch "on" again and will do so until the power supply to TV is lower than 224V. I ran a AC DC regulater to keep power output to TV as close to 220V. Then TV plays perfect. Aventually I unplug TV and go to bed. I have tried UPS's as well. Same problem. I think power supply unit in TV is damaged due to power surges. I replaced this 2 year old TV with a new one. Costly excercise. I still belive this TV can be fixed.


If a power supply is what you want, they are available all over the world, just use the internet like you did tonight and use Google, type in your tv make and model and power supply and you will find them. Parts are really hard to come by now the Qua ... Flat Panel Televisions

3-yr old Samsung HL-S46765;symptoms indicated lamp diing; finally TV would not turn on;un-plugged tv, removed lamp to verify code and make (Phillips);put in new lamp; TV turned on for about 30 seconds;all indicator lights went out;tv shut off; all indicators lights blinking (lamp problem). unplugged tv, removed lamp housing; put back in; plugged in.; waited; tried to turn tv on - tries, then indicator lights start blinking


Thank you for posting your question on Fixya. In such a case the first thing to check would be to see if the lamp is coming on momentarily before it shuts off. For this please remove the back cover of the tv and fire it up. Please check the status of ... Samsung Flat Panel Televisions

Hi, I have just purchased a new TV (LG32LE4500) and am having problems finding the correct code to allow my sky remote to control it. I have searched online, phoned sky and phoned LG but none of the codes that I have tried work. I must have tried about 50 different codes! Any help would be much appreciated. Regards Lee


... LG 32LH30 32 in. LCD HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0947 seconds