Suggested Questions/Answers :
It is recommended you read all this kind of situations
I have some problem with Power board from Sewing machine EX-660. The one of electrical component blown and I don?t know to identify it. On the board I found the sign it?s look like 2 diodes face to face with parallel line on back (maybe varistor) but that kind varistor I don?t know. Please help.
Flat Panel Televisions
Black screen I have a Samsung un46d8000 flat screen TV which is about 8 months old.
It has so far worked without problems but yesterday when switching on there is just a black screen. Sound from all inputs is fine and it looks like that there are 4 small lights in the back that you can see glowing through the screen. Its still under warranty if I can find the receipt!!
If I dont find the receipt any ideas? I did have a peek in the back and there looks to be one big board that drives the Screen.
You are on the right track suspecting a power supply problem. If you are tehnically inclined you might be able to repair your TV, especially if a board swap seems feasible. As always you have to dtermine the cost of repairs vs replacement ...
Samsung Flat Panel Televisions
My mitsubishi ws-65513 picture makes a pop noise then goes out with the sound but can still see video source info on corner of screen. then i have to turn tv off wait a couple of seconds then back on then tv will work for a shourt time before picture goes out again. i have looked at the four caps on the Dm board they dont look faulty or bulging but dont know if that is the problem
Mitsubishi WS-65513 65" Rear Projection HDTV
My Zenith tv rarely turns on clicks and goes to standby and im not sure what its call but a yellow transformer on the power board make a squealing nose for like 5 seconds after it goes to standby. No Capacitors are swollen and after i used the auto convergence it turned its self off and i haven't been able to get it to turn on since even if i can get a new power board i dont know where to look?
To find a new power supply board all you need to do is search on Ebay or Google etc with your model number. Also try shopjimmy.com ...
Zenith Projection Televisions
Hi, I have a Sony kdp-57ws550 that had a 10 blink code. I took the d-board out, r8051 looked burned up, I replaced that, hooked everything back up, turned it on and now it sounds like its coming on, does 4 blinks and turns off. Does anyone know what this could be?
Check IC5101 on the D board vertical deflection has stopped. The 4 blink is indicating vertical deflection has stopped. ...
Sony Grand WEGA KDP-57WS550 57" Rear Projection HDTV-Ready Television
I have a Maxent MX-58HPT51 model P58H10NJA. I bought it in 2007, have been using it for years. I recently moved houses and brought the tv with me. When I plugged it into power at my new house, the LED did not light up and the TV will not turn on. I know the outlet is hot, tried different plugs. I currently have the back cover off and none of the boards or transformers look like they're fried. I'm stumped, please help.
Try resoldering the parts at the power supply section and check also connectors make sure that there are no loose connectors.press down fuses make sure it have contact on the board If you have a multimeter measure the continuity of the power cord rep ...
Flat Panel Televisions
Changed the main digital board it was the same they told me on the tuners there is a number it should match the original one
like my original is n7hf but i dont know if somebodey changed it before i change the board twice it was the same problem.
now my question is if the tuner number is different
what problem does and how iam gonna know what was the original number on it
If the part number and revision version match , then you can forget about everything else. The part number will be printed on the board itself or it will be on a small label on the board. Post all the numbers you see on both boards(the board that you ...
Sanyo DP32746 32 in. LCD Television
My 42 inch Maxent went out. Had sound no picture. Replaced Zsus board and same problem. Replaced Ysus and now I almost have a picture. Screen is black but looks like the picture is in the back of the black snow. Picture looks like it trying to come in.
Whn the sustain boards go out, its usually due to the buffer boards. Since you have already replaced the sustain boards, replacing the buffer boards should do the trick as these are the boards the control the firing up of the gas inside the PDP(Plasm ...
Maxent MX-42HPM20 42 in. Plasma HDTV
PN58B530S2FXZC:One quarter way up the sreen all the way across
three lines of small rectagular blocks ( looks like dna )mostly when
white back ground ,like on hocky game and even in light colours. They have change the main ciricut board all ready after one year now 10 months later its back. Bought the plasma tv in may 2009
with extended warrenty .Anyone seen this problem before ?
Samsung PN58B530 58 in. Plasma TV
I want to know the especificacions of the 5 diodes and 10 mosfet from the samsung y sus board hps5033x/xaa I get the 10 mosfets but I dont know the 5 diodes or were can i get the kit the 10 mosfet are ta50n28t i just need the reference of the zeners
Samsung HP-T5044 50 in. Plasma TV
Cant remove stand from LC46SB54U - dont see 2 prongs going into back of TV...this is what my model looks like. http://lcdtvsale.devhub.com/blog/167586-sharp-lc46sb54u-46-inch-1080p-lcd-hdtv/
Look at page 7 Quick reference sectionfor similar model here:http://files.sharpusa.com/Downlo ...
Sharp LC46SB54U 46 in. LCD TV
My Vizio plasma vp422 made a loud pop and went off. Now it won't come back on. U can turn on and the vizio display turns from orange to white but nothing else. Also u can see the little green light in the back is burning. I have removed the back and don't see any visible damage such as blown capacitors. Also I checked the 4 little white fuses and their is continuity running through them. I don't really know where to start looking next. Would it be one of the boards? Is there any way of checking
You need to get a service manual (good luck) or begin by testing all the marked voltages out of the power supply board at TURN ON.do any come up and instantly go to zero or very low? That is a clue where you would have to follow up. ...
Vizio Standard (CRT) Televisions
Picture settings model # pt-47wx52cf, just would like to know what the best picture setting are in piture settings. find it quit yellow,like every ones face looks like they have yellow johndiss!
Settings are not likely to resolve a "yellow" looking screen.Go to an unused video input or turn color all the way off----the screen should be gray or black and white looking.What this really suggests to me is a total or partial loss ...
Panasonic Projection Televisions
I have a Panasonic Plazma TV, TH-46pz80u is the Model Number and the LED light blinks 8 times. I just need to know which certain board to replace. I have already opened the back of the tv to inspect where each board is mounted. I am having trouble getting the details just for my model type. I am aware that alot of the tv's share the same boards. I just need a little more guidance and I would like to get the troubleshooting spec manuals to refer to for this repair.
Hello,The power supply board is dead, do you know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replac ...
Panasonic Viera TH-42PZ80U Plasma TV
I have a samsung ln-t4053h that had a bad caps. I replaced the caps and the tv turned on fine and i put a flashlight to the screen and the screen turns on but the backlight is on 10 and it looks like its not on at all so that leads me to believe the backlight inverter. As I was testing this the power board slipped and touched a metal part in the back of the tv, sparked, and now the tv wont turn on at all. I figure that i shorted out the power board. If I replace the power board will me tv turn o
Samsung LN-T4053H 40 in. LCD Television
I have a Sharp LC-19DV12U with a defective D501 labeled 10E241. It is located on the power supply pcb connected across the 120v input to the board. The board does appear to use conventional identifiers (c=capacitor, r=resistor, t=transformer) so I would expect it to be a diode although in fact it looks like a ceramic disc capacitor. Unfortunately, I don't have a tech manual or a parts list. Can anyone help with a part number?
Sharp LC19DV27UT 18.5 in. LCD TV/DVD Combo
I own a Mitsubishi WS-73711 that needs a new convergence board. I hired a crappy tech to come out and fix it in Septemeber, and have not heard back since. So now, the convergence board is gone and I would like to replace it if possible. Know how or where I can purchase one?
For a whole board try shopjimmy.com \012 \012 ...
Mitsubishi WS-73711 73" Rear Projection Television
Screen is black and it smells like something is burning, but we cannot see any visable burnt wires or anything...we have removed the back of the tv, and looked at the circuit board...where exactly sho
Unless you know what you are doing you are playing with fire, Unplug the set and have someone qualified take a look at it. Smoke and a burning smell and you still have it powered up? ...
Polaroid TDA-03211C 32 in. LCD HDTV
I have a zenith rear projection tv model r56w36. It won't turn on. When I remove the back panel and turn it on, I see a bright flash coming from the middle bulb on the right side of it where it looks like a wire is connected and then I hear a click from the power board. All the conductors appear to be fine. No bulging or anything but it won't stay on. Please help
Convergence issue I apologize for not having the exact model number. I have what seems to be the typical convergence issue with my TV. I have pulled out the board and tried resoldering the 2 main chips but the problem came back. I would like to purchase chips for this but I want to make sure I order the correct ones for the 42" set. Do you know which chips that I need?
It depends on which model you have. You will also probably need to replace a few resistors. ...
LG 42PQ30 plasma tv wont turn on anymore, when you plug the tv in it makes a click noise and when you hit the power button the blue light comes on then changes to red after couple seconds. Note the screen isnt coming on and no sound.
What do you have to fix/replace to have tv work again, I opened back of tv up, I dont see any of those compactors thats look bubbled or leaking. I see some have like hot glue on them some have white glue. What do you think is wrong with the tv, i want to tr
I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ...
LG 42PQ30 42 in. Plasma TV
I HAVE A SAMSUNG PLASMA TV MODEL NO HP P5031. THE TV HAS DEAD PIXELS AND BLACKED OUT SECTIONS ON THE SCREEN WHICH SEEM TO BE RANDOM, NEVER IN ONE SPOT. I HAVE REMOVED THE BACK OF THE TV LOOKING FOR LOOSE CONNECTIONS AND DONT SEEM TO SEE ANY.. ALSO THERE IS ALOT OF DUST ON THE CIRCUIT BOARDS. COULD THAT BE A PROBLEM? DATE OF MANUFACTUER WAS JUNE OF 2004, IT IS AN OLDER MODEL. IS IT EVEN WORTH IT TO REPAIR. THANK YOU
Samsung HP-P5031 50 in. HDTV-Ready Plasma Television
We cleaned the lenes and put new bulb in ,put the tv back together and the picture to colors like voilet color and a bright yellow took it apart 3 times..dont know what else is wrong
If your TV looks 3D, warped, or distorted it likely has a convergenge problem. If however it just looks dull, washed out, redish, greenish, or blueish or if it looks like objects on the screen have halos the fluid in the lens has soured.Y ...
Philips 55PL9524 55" Rear Projection HDTV-Ready Television
Looking for a replacement lamp also. one said to check bulbtogo but they dont have them and it seems like nobody else does either. wondered if anyone had any luck after posting that they couldnt find one. does anyone know what the voltage and wattage is for this lamp. i guess if all else fails i could try to remove the bulb itself and replace it with something close. that or im out a $9,000 TV...
Mats Electronics Sales Lamps for $89.00- $139.00 1-800-628-1118\012Lamp PN# 915PO16010\012Look on EBay under Electronics TV/Parts type in Lamp number. ...
Mitsubishi WL-82913 82" Rear Projection HDTV