Having problems with your Flat Panel Televisions ?

The picture mode on my tv is stuck to wide. When I try accessing this feature through the remote's "p-mode" or "p-size" buttons it gives me an message on the screen that says "not available." I've also tried accessing this feature through the menu on the remote and on the side of the tv but I still keep getting this same error message. I tried reading through the manuel, but there is nothing under the troubleshooting area that helps or addresses this issue. Is there a way to reset the tv t



Answers :

If it says "not available" then you have to try the settings of the input source such as a cable box or something. Chnage the aspect ratio to 16:9 . If you can get me the model number of the box I will see if I can get your precise instructions.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

The picture mode on my tv is stuck to wide. When I try accessing this feature through the remote's "p-mode" or "p-size" buttons it gives me an message on the screen that says "not available." I've also tried accessing this feature through the menu on the remote and on the side of the tv but I still keep getting this same error message. I tried reading through the manuel, but there is nothing under the troubleshooting area that helps or addresses this issue. Is there a way to reset the tv t


If it says "not available" then you have to try the settings of the input source such as a cable box or something. Chnage the aspect ratio to 16:9 . If you can get me the model number of the box I will see if I can get your precise instructions. ... Flat Panel Televisions

Mitsubishi CS-31205 TV Never had a remote for this great TV, but, accidentally pushed a button on my Comcast Cable remote and the TV is now in "Mute" mode. Not the Comcast box 'Mute' . Have tried pushing the "Reset AV" button on the front to no avail: Does TV have to be 'Off', 'On', or unplugged? Can I access this feature, to turn it off, without a Mitsubishi remote? Is there some combination of front buttons to undo this?


You are supposed to be able to switch the Comcast Remote to TV mode and switch Mute on that remote to change back to standard volume. If that doesn't work try volume up on the TV. Otherwise if neither of those work then check Remotes.com for a repla ... Standard (CRT) Televisions

Un55es6500 Can't access advanced menu in the service menu. I want to disable the "CE Dimming" feature in game-mode, but am unable to access the feature in the service menu. I have gone through all the steps listed online: turn-off the tv, press menu, 1, 8, 2, power, scroll down to advanced and press 0000. When I get to this step, 2 additional features are displayed below Advanced but are dimmed out, however I am still unable to access the advanced features.


... Samsun Flat Panel Televisions

I HAVE A TOSHIBA TELEVISION MODEL NUMBER 27A42 AND I DON'T HAVE THE ORIGINAL REMOTE. I NEED TO CHANGE THE INPUT SO I CAN CONNECT MY DVD OR MY PC TO THE TV. I HAVE A RCA UNIVERSAL REMOTE BUT WHEN I TRY TO ACCESS THE TV MENU IT ONLY STAYS ON FOR A VERY SHORT TIME AND I STILL CAN'T ACCESS MOST OF THE FEATURES OF THE MENU. PLEASE HELP.


... Toshiba 27A34 27" TV

I am trying to connect an xbox to my Toshiba REGZA TV but have been unsuccesful. When i hit the input button to try and change modes to Video 1 or 2 i am unable to access them on the menu as they appear "hidden".


See if you can unlock inputs by going to a Rename input option. ... Toshiba REGZA 42 in. Flat-Panel LCD HDTV

I have a Sony bravia kdl-46nx710. I have tried different solutions and cannot get demo mode off. It pops up with features menu or DEMO MODE (LOOP) Motion 120Mhz on the screen. Your assistance will be greatly appreciated


... Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

I was just given this Hitachi T.V. and when I plugged it in I have a good picture but no sound. I have tried everything I could by reading the manuel, but no luck.


First, recheck your cables, and their configuration. Make sure whatever source you're using is properly connected to the television. If possible, check your peripheral devices by hooking them up to another TV. \012\012If you're just connected t ... Hitachi 57UWX20B 57" Rear Projection Television

Matsui m32lw509 When i turn on my TV it goes straight Burn In Mode, (red,blue,green)... Ive read solutions for it and they all involve the remote which i dont have. Is there anyway so access the service menu without it or is there anyway so reset the tv externally ?


No There is no other way to get into its service mode, without its original remote control. Contact the authorized service centre for Panasonic to buy an original remote control. ... Flat Panel Televisions

My 42lg50-ug tv seems to be stuck in standby mode it's reading tv software upgrades uart download connect cable start '1 xmodem in hyper terminal what can i do to get out of this . i tried pre


... LG 42LG50 42 in. LCD HDTV

How to access the service mode on a panasonic DMX-E75 dvd recorder, to try and rectify the U81 error code


The link below will tell you how to get into the service mode on the DVD\015\012\015\012http://www.riddle ... Panasonic Flat Panel Televisions

I have a 27N-S100 TV. It was given to me with no remote. The Cable plug thing in the back is completely broken off, but I was told the TV could work perfectly by using the 3 colored cables (I believe they are called A/V cables: yellow, red and white?) and going through a VCR. I have tried endlessly to hook these cables up with my VCR and I am getting nowhere. Not having the remote, I downloaded the owners manual and read through it and it showed how to access the menu through the two channel bu


What you're trying to do shouldn't work unless the VCR has a digital tuner in it or your cable company still hasn't converted over to digital as of yet. You will need to get a digital cable box from your cable company.Connect the av cabl ... Sharp 27N-S100 27" TV

I have a magnavox mdv 430 model dvd player. I cannot get dvds to play on it anymore and when i try to, a text box reading "disc error playback feature not available on disc" pops up. It does this for all dvds. please help!


... Philips Magnavox 50ML8105D 50" HDTV DLP TV

I have a Panasonic DVD/video recorder DMR-ES35V which will currently not record or play either DVDs or videos. The message on the front screen reads "A1". I don't know what I have pressed to cause this and I certainly don't kinow what to press to return the system to normal mode. Comment: I am bit of a techo dummy and I have limited eyesight, so if I need to play with buttons on the actual box I will need either very clear instructionhs or pictures showing which buttons to use. I have tri


Hello Shonz!Is there any other error code that follows A1?Just like a U61 if there is any, just post it back here.So we could figure out the real problem. ... Panasonic Flat Panel Televisions

I have a 19 inch toshiba tv 19A21 but no remote for it. I'm trying to hook up a dvd player to it to play through the tv. All the cables are set up correctly, but I can't find the input channel on the tv that will let me play it. I read the manual for this tv and it says you use the remote to access the input screen, but I do not have a remote. Is there a way to do it through the buttons on the tv? Pressing the volume buttons at the same time got me to a menu screen but I didn't see an optio


Most analog tv,u just reqiure pushing the tv manual button channel up a few times,tv will go into video modes like 1 or 2 for play video devices.If this doen't work,try website like Remotes.com to buy an original remote. ... Toshiba 19A21 19" TV

I have a panosonic TX-47PT1. No problem since new. 3 days ago the convergance went. The colours (mainly red ) have slightly seperated and become a horizontal wave. I have read the forums and it seems there is a convergance mode I can enter into but have lost the manuel. Can someone help please. [email protected]


Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are more details and solutions for both. Repair kits with instructions are also avail from ... Panasonic PT-51HX43 51" Rear Projection Television

I have a panasonic tv model TC-21FJ30P channel 2 and preset menu was accidentally child lock, can't unlock it. The remote control is busted so i can't use it. Been trying to go back to Features which has child lock command on it but can't access it because it was skipped. How can I unlock it?


... Panasonic Standard (CRT) Televisions

I bought a 40 inch Westinghouse led TV. It keeps going back to set up mode. when I am watching something and I try to turn up the volume the TV goes back to set up mode (doest always happen... i would say every three times i do, it does) where I have to scroll down to "connect a game, Blu-Ray, DVD or other player then select my input". its very frustrating. I thought it might be a quirk in the remote so I tried getting a universal remote but it wont connect to the tv at all. I have tried severa


... Westinghouse Flat Panel Televisions

My Philips LCD TV (26PF7321) is stuck in DTV mode, cannot access most menus, please help?


My TV is stuck in DTV mode, can't get it back to TV mode. Any help out there? ... Standard (CRT) Televisions

The TV works however I cannot get the set to read the channels. I have cable but no cable box. Have tried to program it for over 3 hours. I've tried it using ch.3 and ch.4. through the remote. After I scan the channels, it tells me none were read. My other TV's work, so it's not the cable company. I even plugged the plug for about 30 minutes.


Check you cable or air settings. I would try cable setting first then scan channels, if that doesn't work I would try air and scan.I am not sure cable setup.\015\012also check tv input settings. the lcd's have an input selection button. it will ... Flat Panel Televisions

I have a Samsung LED TV UA32C4000P bought from Dubai. Now the warranty is over, and it shows vertical lines when I try to increase the volume are try to change to viewing Mode like Dynamic, Standard etc., But when I keep the TV in a stand by mode for 2 or 3 seconds and switch it on, it becomes completely normal, and no lines when I watch for any number hours. Can suggest a solution for this please?


... Flat Panel Televisions

I have tried to retune my acoustic Solutions freeview tv/dvd player (model astvd-31199-s2-id-hd), and it is now unresponsive. I pressed 'tv menu', selected 'settings' and 'auto retune'. It seemed to work, I.e., it produced a progress bar which over a few minutes completed. Tv then went black, and standby led began flashing. The tv will now do nothing else. Unresponsive to pressing remote buttons or tv buttons, won't even switch to an alternative mode (I.e., dvd mode). Tried unpluging and even re


... Flat Panel Televisions

I purchased a Seiki TV and want to access setup wizard to make change from home mode to retail mode. How do I access the setup wizard?


... Flat Panel Televisions

Dark screen husband rolled over on the remote, have directtv all other tvs work well just this one dirrct tv says its the tv not them scsreen is dark can see red green and blue thats all the light it puts out also it seems to be in analog mode and I can't see the screen to try using system setup I tried going to tv mode and changing the channel to line one to or aux/ but can't get it to go there any ifeas


... Sansui TVS2750 27"

My rca tv is stock on VGA mode and change it to any other mode plus in the menu mode is only working in three mode only I have no access to lock and channel s


Make a hard reset to this TV and check. Unplug it from AC mains wall socket and re-plug it back after 10 minutes or so. This must make it a hard reset. ... Flat Panel Televisions

I have a mistubishi WD-Y57. I replace lamp 7 month ago, and now my tv doesn't work. I have sound but no picture. I took off the plastic grill from the back of the tv to see what it was doing when I tried to power it on. I see the fan turn on and see the light trying to cut on. It flickers light. It try two times before shutting down. If I see light flicking, does that mean the lamp isn't the problem? I tried to read the code light by holding those two buttons in front of the tv. But am not sure


WOULD YOU LIKE TO SELL IT ..LET MY NO LEE ... Mitsubishi WD-Y57 57" Projection HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6449 seconds