Having problems with your Flat Panel Televisions ?

Logik TV L32LW783 wont turn on. Blue light is solid, press standby and Blue light dims then goes off. Then goes back to solid. TV has to be left sometimes for 24 hours before will work again. Once tv goes into standby - this happens all over again



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Logik TV L32LW783 won't turn on. Blue light is solid, press standby and Blue light dims then goes off. Then goes back to solid. TV has to be left sometimes for 24 hours before it will work again. Once tv goes into standby - this happens all over again. Once it's on, it eventually dies, sometimes after a couple of hours, sometimes after thirty minutes.


... Flat Panel Televisions

Logik TV L32LW783 wont turn on. Blue light is solid, press standby and Blue light dims then goes off. Then goes back to solid. TV has to be left sometimes for 24 hours before will work again. Once tv goes into standby - this happens all over again


... Flat Panel Televisions

Ce32ld33 tv sanyo turns on stays on for couple hours then turns off and stays off until an hour or 2 then switches on .i try to switch it on after about 20 mins but the little blue standby light goes dull now when it is actually working it switches off then the tv comes on but for some reason it goes a dull blue then blinks 1 in 2 mins then blinks once again after another 2 mins i am getting really peed off with this hope yall can help me please email: [email protected]


There is a high possibility that the components over a period of heating and cooling, tend to bring on a problem of dry soldering. So my advice is to check the set for some loose joints that have played on to give you these erratic shut downs o ... Sanyo Flat Panel Televisions

I have a pioneer elite television. The red standby light is on, everytime I push power button it goes off. Cant get the blue light on for the tv to work. Think its stuck on standby mode. tried unplugging but did nothing.


In most cases the standby light might blink with different rapidity to indicate a fault relevant to the processor. It is possible that most of these indicate that there are errors in the processing section . Since there is a possible short o ... Flat Panel Televisions

Lnt3232hx xaa unit is lcd when powered on standby light blink sound effects cue but set is dead standby light goes off when pressed again turn sound cues and standby light goes solid again


... Flat Panel Televisions

Lnt3232hx xaa When tv is powered on standby light blinks 3 times slowly,does the start music but then standby light goes and set is dead pushing the power button again makes the tv cue the turn off music and standby light goes back to solid


... Projection Televisions

Nec pxt-42sx1b won't turn on. We press the on button on the remote and the stand by light turns from red to blue but then goes back to standby.


I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ... NEC PXT-42SX1B 42 in. Plasma TV

I use this Alba television in my bedroom and usually watch it for a little while before I go to sleep. Due to the fact that it cannot be turned off completely (always on standby unless the plug is pulled out) I have connected it to a time switch. When I switch off it goes onto standby and shows a steady blue light. However, I have woken up again before the time switch has cut the power and found that the blue light is flashing. This can be cured by switching the television on and off again. Howe


If the tv is not a plasma unit which are expensive to run I would not be bothered completely turning off the power. I have a power supply readout connected in the mains power and Like you I believed the hype about switching every thing off but I lear ... Flat Panel Televisions

My Sony LCD TV Model KDL-46VL150 will go to standby mode after watching for a while. When goes to standby mode, the red light will flash in six times interval, during the red light flashing, the TV cannot be turned on. After about 25 mins, the TV can be turned on again. But after watching a while, it will goes into stnadby mode again. whats wrong ? I have updated the software but it still doesnt work.


Hi,This isn't good. A 6 flash shut down means there is a problem with the backlights inside the panel.This TV was initially introduced in Oct 2009. If you might have bought the TV within last year or so, try to call Sony and check, if th ... Sony BRAVIA KDL-46S2000 46 in. LCD HDTV

I have an AOC LCD tv when I hit the power button the light turns blue and then right back to orange, at first it would eventually come on after pressing the power button several dozen times and work fine until it was turned off, now it just goes from orange to blue and back to orange or the light goes out completely. I saw a video that said when it does that it could be the power supply or the main av board, what do you think?


Hi there , sound like it may need output caps replaced in the power supply . ... AOC L26W861 26 in. LCD TV

Mitsubibishi wd series 73"..Mitsubishi ws series 73" dlp. Works fine but after several hours of viewing screen scrambles then goes blue and sound goes off. I can switch to another input and watch ama


A couple of suggestions, if only on cable and using a box disconnect the set and box from power and after several minutes repower and see if a reboot helps.The two models listed here both should also have a soft reset done with the original r ... Mitsubishi WD-52525 52" Rear Projection HDTV

47LG50 screen light goes black after about 45 minutes of being on, sound still ok. Turn the tv off and back on and its fine for another 45 mins to an hour. The on/off light goes from red to blue-ish when screen goes black. As a note I took out the power board adn checked the capacitors and none where bulging or burst (someone said maybe they are drying out)...does that sound like the problem of is this an inverter board issue. I just want to change the what might be the most likely issue


Good day!That problem is commonly happens when the inverter board failed.But before you replaced that its better to check this out first.Just follow this simple and D.I.Y procedure on troubleshooting. ... Flat Panel Televisions

JVC AV-25P8-PH TV turns on (the standby mode) with the red light, but when we try to punch in the channel (using either remote or the push buttons on the television itself), the red light becomes green then automatically shuts off. We can't get to work the TV even if we plug it directly on the wall socket, nor unplug then plug it again. Just goes on and on. What do we have to do with this to make it work?


Hello,The issue you describe is consistent with a power supply board issue. This is the board where the AC goes to. This problem may have occurred as a result of irregular power supply, or excess power supply or power surge.Th ... JVC AV-32260 32" TV

Hello i have a 56hm66 , the tv was work fine sometimes the lighting would dim just a little then brighten back up it would do this several times then stop. well i turned tv off came back several hours later, blue light black screen no sound, switched through inputs and ant 1 got blue pink green screeen. thanks for your help


Hi.From your description the TV looks faulty and should be tested by a technician.Problems that can be seen are a fault concerning source inputs and a problem related with voltage to the lamp.The first think that s ... Toshiba 56HM66 56" Projection HDTV

I have a Sony KV-35S26 manufactured Aug '97. The picture comes ON only occasionally. When it fails to come ON, the standby light blinks continuously. Sometimes, the picture comes ON initially then goes out after several minutes. The picture looks fine when its working. Audio works fine. I removed the back cover and inspected the soldering, wires and connectors but found nothing obvious wrong. Just before the picture goes out, the image being displayed collapses vertically then I see a ser


After 4 or 5 yrs EHT ( transformer that supplies voltage to CRT TUBE - TV TUBE ) becomes weak - then few TVs ( not all TVs ) behaves exactly as you have described.............. .......so solution is EHT ( also called as ... Sony KV-35S26 35" TV

My tv just stopped working. When i felt the power supply box it was very hot. I unplugged the tv and after half an hour turned it back on when the power supply cooled down. The tv worked again but only for about half an hour and turned off again. The standby lights are on but i cannot get the tv to go on. What could this ba...maybe the power supply? Please help. Thank you


Hello,It's the problem of overheating in the power supply board of the Television.on the power supply board of the Television there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the Tel ... Flat Panel Televisions

The tv goes into standby (picture goes black) the standby light flashes many times then the picture comes back on . it will do this repeatidly . some days it works fine . not today though ! UGH! lol . Help please ! Im please tell me how to fix it myself,im' mechanically inclined , and poor. thank you .


... Sony KDFE50A10 50" HDTV

Lcdx37whd88 when power button is pressed at side on tv it comes on to standby.a blue light is lit on front of tv. when you press remote to turn tv on,light goes off but screen is black and goes back to standby


Sounds like your power supply capacitors have failed. Google for Z1234TV and see if you can locate a power supply capacitor repair kit for your model. ... Projection Televisions

Viera tc-32lx600 when power is turned on the screen goes from solid red to solid green to solid blue to solid white to solid black and then repeats. the sound works and you can change channels but stays in


Reset this TV. To do this, you have to enter its service mode options. Visit the site named 'Electro-help' for\012more details. Check this ... Panasonic TC-32LX600 Television

My 32 Xenius LCD TV has a constant blue flashing Standby light at front and won't turn on.


... Flat Panel Televisions

My TV was working and then all of the sudden the screen went blank and now there is a flashing red light that appears. I tried to turn everything off and back on (the universal solution to everything) but when i power it back on from the TV, it first shows the blue power light and then goes back to red flashing light


Hello\015\012\015\012There is something confusing the system control of your TV and it should me resetted. To reset it, just switch OFF your TV with its front panel power control switch, and after that, unplug the TV from the wall socket ... Philips 37PFL5332D 37 in. LCD Television

Wd62627 On my wd62627 The tv turns on with sound and picture for about 2 seconds. Then the green light flashes 3 times tv goes solid blue. then turns off after about 10 seconds,and the green light flashes for a while.then stops. No other lights come on. What could this be?


It could be your power supply board. ... Projection Televisions

I have a Mitsubishi WD-73737 and when I turn on the tv the power light flashes very fast for a minute then stays a steady green and the screen is a solid blue. There is no sound as well. I have tried the system reset and it didn't do anything. I was given this tv, so I don't know how old it is. The tv will occasionally work but that is very random. The only item I have plugged in is an Xbox 360 with the component cables. The menu button does work so I know the screen still works.


Do you have the input turned on that you use the xbox for? Try different inputs as well. If you are getting the menu to come up, the blue screen is telling you that you don't have a signal being run through that particular input. ... Projection Televisions

JVC HD-56FN97 when turned on blue light is solid,red ligt blinks a few times and goes out. My picture is very dark despite adjustments I make in the menu, any help or feed back apreciated.


The set does use a lamp for a light source and average life is 2 years or 2000 hours---many lamps before they actually fail get to be darker. ... JVC HD-56FN97 56" Television

SONY KLV30U300A WORKS FOR A WHILE THEN GOES TO STANDBY, THEN I TRY SWITCHING ON WITH REMOTE LCD GOES OFF COMPLETELY WITH NO LIGHTS SHOWING


... Sony Bravia KLV-32U300A 32 in. HD-Ready LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1542 seconds