Having problems with your Flat Panel Televisions ?

DP46849 Sanyo. I have checked all of fixya for solutions. I hane no sound or screen but have a green light when turned on. It will flash as if it is in protect mode. I have checked voltage and there seems to be 5v, 12v and 15v as indicated on power supply. I cannot find a 24v to read from but I did pull the master inverter to see if I had sound. Still the green light flashes and no sound. I suspect power supply only because when it is turned off I hear a high pitched whistle that slowly goes on



Answers :

Hi,
Power supply board seems defective and causing problem. Please replace power supply board to solve tv issue, required board is available in shopjimmy.com
Thanks.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

DP46849 Sanyo. I have checked all of fixya for solutions. I hane no sound or screen but have a green light when turned on. It will flash as if it is in protect mode. I have checked voltage and there seems to be 5v, 12v and 15v as indicated on power supply. I cannot find a 24v to read from but I did pull the master inverter to see if I had sound. Still the green light flashes and no sound. I suspect power supply only because when it is turned off I hear a high pitched whistle that slowly goes on


Hi,Power supply board seems defective and causing problem. Please replace power supply board to solve tv issue, required board is available in ... Flat Panel Televisions

My Akai LCT2660 is not connected to any devices. It has worked perfect for about 4 yrs. I was watching it for a couple of hrs. Turned it off for about an hr. When I turned it back on it briefly flashed a picture then I only had sound. Now if I turn it on it will briefly flash blue light on the right side. I checked the capacitor on the power supply and can't visibly see any bulging


... Akai LCT2660 26 in. HD-Ready LCD Television

I got a Sony Bravia KDL-40WL135. Blank screen. There's two LED lights: red standby and green power light. When I turn on the TV, green led comes on, then after about 30 seconds red led blinks once, then green resumes. The green led stays solid. I think that's a SONY error code, I tried to look it up but can't find anything useful. I have replaced the power supply, AU board, backlight inverter, logical board, and the second power supply board. Any suggestions? I haven't checked the t-con bo


Http://www.smpcshop.com/KDL-40WL135-KDL-46WL135-p-8895.html\015\012\015\012\015\012\015\012Above is a link for a service manual.\015\012 ... Flat Panel Televisions

Samsung PN50B450B1DXZA will not power up. When I try to power it on, it makes a clicking sound and then nothing for 10-15 seconds and another clicking sound. The Red LED on the front flashes when it clicks but nothing ever appears on the screen. I removed the back of the TV and inspected Capacitors but do not see any that look to be bulging. When I try to power it on with the back off, I see a green light quickly flash on a logic board just below the power supply board. Are these clues helpful


... Samsung HP-R4262 42 in. Plasma Television

Sanyo dp50747 TV turned itself on and will not turn on. The green power light located on the front panel lights up and the side panel off/on works but no sound or picture is shown. The front panel green light stays lit. The TV did this again about one month ago but I just turned it back on. Yesterday, it turned itself on and now does not turn on with the sound or picture shown. There is no sounds or odors from the TV. The power outlet works fine and the TV appears to be getting some power


Sounds like a mainboard problem ... Sanyo DP50747 50 in. Plasma TV

I have a Vizio P50 HDTV20A, this TV is 2 years old this month. TV will not turn on in the morning after being off for hours. The green power light comes on and you can hear a sound like the TV is turning on but the screen in black, no picture, no sound. I ususally can get the TV to come back on after unplugging it 20 times but when it does turn on it makes a static sound, I see a quick flash of a grey screen and then the TV works. Any suggestions to what might be the problem?


... Vizio P50HDTV10A 50 in. Plasma HDTV

Sanyo DP42410 I went to turn my Sanyo DP42410 on and I get a green status light. I also see that the light inverter lights up but no GUI whatsoever. I press every button on the TV and remote yet no luck. I noticed this about 6 months ago. I had it put away for the last 5. Went to turn it on and same thing. Checked the power board in the back and no puffed capacitors.


... Flat Panel Televisions

I have a vizio vp422 that made a loud pop and now doesn't have any picture or sound. When you power it on the vizio display light turns from amber to white but that's it. U have to unplug it to turn it off. I have checked the fuses and they are good. The capacitors look good visually. There are a couple on the power supply board that have a black cover over the top, so I don't know about those. I changed the main board and made no difference. Someone please help!


Replace its power supply regulator board as card basis. ... Vizio Standard (CRT) Televisions

HI, I have no picture of sound. When I turn the TV on I get a series of clicks then the light turns from red to green and flashes green 3 times. I checked the power board and found 9 bad caps and replaced them but still no picture and the TV does not come on. Please help.


3 blinks indicate a failure in the power source. \012\012\012You will need to test it, identify the failed output line (most likely it's the 3,3 v one) and replace the failed parts - most likely the rectifier.Use this manual for a more pr ... LG 50PC3D 50 in. Plasma Television

I have 50 inches plasma Hitachi TV (ALiS 1080HD). As the TV was on, the screen stopped showing (no picture) and no sound could be listened as well, without any reason. The power light started flashing (on and off) so I turned the TV off from the power supply (as the remote control was not responding). Few seconds later when I turned the power supply back on for a moment I heard a sound (making me believe that the problem was fixed) but once again the power light started flashing with the same en


... Flat Panel Televisions

LG 47LG50 dead....no red light, no blue light, no green light. It made a CLICK sound and went dead. Power Supply?


May be power supply need more information ... LG 47LG50 47 in. LCD HDTV

When I turn on the power the Vizio name gets brighter and you can see light in the back of the TV But no sound or picture. Is it the power supply board?


... Vizio E371VA 37 in LCD TV

Magnavox 32MD350B/F7 On/Off keeps cycling. When pluging in the ac power the green light flashs then goes to red stand-by and back to a steady green light and then the whole cycle is repeated again no picture or sound. Cannot turn unit off at this time. After many times unplugging the power in and out, I may get it to turn on with a good picture and sound.


... SNK Magnavox 32MD357B_37 32 in. LCD HDTV/DVD Combo

Hi i have Samsung hl-t6187s when I turn the tv on you can hear the power up sound the tv has dim light that flashes once then goes black. The little green light flashes three times on the front of the tv. This is the led model and can't find much info on this problem. I don't see a bulb you can take out as easily as my other dlp bulb tvs


LED means it uses a LED lamp for the light source, may b e that is bad. ... Projection Televisions

Polaroid FLM-3234B OK, so I don't really know what's going on. I've checked a few of the other boards and most of them talk about the 323b, which I don't just have that. My 32" HDTV won't turn on. I know it's a power supply problem. It happen when I moved the TV from one room to the next and plugged it in. It first came on but with a whirring sound and showed no picture. Then I turned it off and back on and it didn't work. Not even the red light comes on. It was extre


See if my general answer helps at all:I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you ca ... Flat Panel Televisions

Phillip 50PF9630A/37. I have a red blinking 7 times after a green light. i've allready replaced the 2 bulging cap on the bottom of power supply board and also a cap on the Y board (board on the left) although i sodered it backwards with negative on the wrong side, i imediately resodered it and it sitll doesnt work. i've even isolated and unplug the y board and x board independently to see if it will still give me a blinking red lights and it still does. i've checked every capacitors and fuse on


Hello sir Jose!!!!try to unplug the y sustain only and power ON your TV..and see what happen next..Please reply to this tread for immediate help.. ... Philips Flat Panel Televisions

I have a Insignia NS-LCD26A and all of a sudden it has no display or sound. The green power light comes on and I have to hold the power button for 5 second to turn it off?


Probably yes!!!! it will fix the issue. ... Flat Panel Televisions

Dynex 47 My Dynex TV stopped powering on. I was told it could be the power supply board cause the indicator light was not on red or turning green when you tried to turn the TV on. I installed a new power supply board, and i'm still not getting any picture or light indicator. What else could the problem be?


This is exactly why I tell people that when your set isn't working, you have to have it properly diagnosed. Chances are you have a defective main board. The power indication is an indication that you have standby power. However, the power indicator i ... Flat Panel Televisions

I have a sanyo DP42746 plasma it just quit working No Pic No Sound I can see the green light come on in the back I assume is the power supply or mother board then it goes out again.


Might require thorough cleaning and servicing by a qualified service technician. ... Sanyo DP42746 42 in. Plasma Television

I HAVE A 55LD520 LG LCD TV. I TURN THE TV ON THE LIGHT GOES FROM RED TO GREEN TELLING ME THE TV IS ON BUT NOTHING ON SCREEN AND NO SOUND. I HIT THE MENUE BUTTON AND NOTHING. 8 MONTHS OUT OF WARRANTEE. TOOK THE POWER SUPPLY OUT AND NO VISUABLE DAMAGE ON BOARD. WOULD LIKE TO TRY AND CHANGE SOMETHING DO YOU THINK A NEW BOARD WOULD BE A GOOD TRY?


First of all, I'm so sorry you are in this situation. This is a story I'm hearing all too often. Did you have the set on a surge protector? What you are describing sounds like a main board failure but the set will need to be diagnosed to be sure. Pla ... LG 55LD520 55 in. HD Ready LCD TV

I have a RCA HD61w66 serial f494cg09b3 when i turn it on it blinks 3 time then power the green light off no sound no picture or anything check all the caps everything looks good what i have saw but just cant figure this out


... RCA HD61W66 61" Projection HDTV

My Misubishi WD-52631 DLP TV is off sudenly. I turn it on again, but no picture, no sound, nothing happened. I reset it, nothing happends. the green power light blinks for a while, then shut off itself. when turn it on again, I can hear the fan is working, the power light is green, but it shuts off after a while.


Tv LED "LAMP" light indication is blinking?And ur tv projection lamp inside ur tv been used like 1 1/2 or 2 years.Yes.The tv projection lamp require changing,tv projection lamp life are ended. ... Mitsubishi WD-52631 52" Projection HDTV

TV turns itself off after about 5 minutes (green light remains on). I can turn off the TV and turn it back on immediately, however, the TV turns itself back off after a few minutes. It started turning off itself off after displaying harizontal shock waves like lines on the screen that got progressively worst. Now there is no line, just powers off. Once turn back on shows great for about 5 minutes then clicks off (no picture or sound) with green light still on.


Check and make sure your fans are working and there is sufficiant cooling to the back of the set. Sounds like it is overheating and going into protection mode. ... Mitsubishi WS-65513 65" Rear Projection HDTV

Hello, i have a samsung 42' plasma tv model #pn42c450b1d. the tv doesn't want to turn on. i plug it in and you hear a clicking noise se a red power light. also when you press the power button on the tv in the back u see a green light come on for a second on one of the circuit bords( the one under the power board) and simutanously you see a red light come on and and off at the same time on the circiut board with the av, hdmi, inputs. i looked and thier doesn't seem to be any bulging capaciters. a


Hi.As you know the TV is in protect mode because an internal fault has been detected. I think that you already tried leaving power cable disconnected for ten minutes. After connecting back restart the TV with no device attache ... Flat Panel Televisions

Hi, can you help me with this TV please. Hi, I have a Olevia 232-T11 LCD TV. First my TV wouldn't turn and the blue light just stayed on. I replaced the power supply board and now my TV turns on and the screen lights up but I get no picture or sound. The slave backlight inverter board has a blue light when you turn the TV on but goes away shortly after. The screen stays on but I have no sound or can't control the channel, volume or source button. Please help.


If the tv is not coming on but there is no picture or sound then it is a 100% guarantee that its a problem with the audio/video main board of the tv. I am sure that replacing the same would resolve the problem. Please get me the part number that is p ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2198 seconds