Having problems with your Flat Panel Televisions ?

The freeview box froze and the remote cannot make it work,it will not even turn it off(we checked the batteries and they are ok). We turned it off at the main plug then back on again so see if we could reprogram it but it just comes up with...Please wait whilst the hard disc initialises. Unfortuately that was yesterday and it still hasnt initialised! Can you help we have a lot of programmes recorded and dont want to loose them,also we the freeview box is only over 1 year old(out of guarantee t



Answers :

The processor is locked up and can't recognize the remote, unplug the cable box and TV from wall for40MIN. and that will fix your problem.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

The freeview box froze and the remote cannot make it work,it will not even turn it off(we checked the batteries and they are ok). We turned it off at the main plug then back on again so see if we could reprogram it but it just comes up with...Please wait whilst the hard disc initialises. Unfortuately that was yesterday and it still hasnt initialised! Can you help we have a lot of programmes recorded and dont want to loose them,also we the freeview box is only over 1 year old(out of guarantee t


The processor is locked up and can't recognize the remote, unplug the cable box and TV from wall for40MIN. and that will fix your problem. ... Flat Panel Televisions

I have a Logik LRF2101 TV. It had been working fine with a freeview box. I plugged in a BT vision box and it has now coloured the screen red, green and blue. I removed the BT vision box and connected it back to the freeview box - now I still have a red, green and blue screen.


... Flat Panel Televisions

Our RCA 27 inch TV (F27227EM), purchased on 1992, is hooked up to our DirecTV DVR Plus box. A simple click of the "ON" button on the DirecTV remote has always turned on both the DirecTV box and the television simultaneously. Yesterday, the TV stopped coming on even though the DirecTV box still powers up. No sound or picture on the TV. If I get my ear close to the TV I can hear a very faint click as though it is trying to turn on, followed a few seconds later by the same faint click as if it'


... RCA F27442 27" TV

I have a Sharp Aquos 40E67UN. We came home yesterday and although the TV turns on and our directv box turns on, the tv just has a blank screen where you can go to different inputs, but none of the hdmi inputs work. I also tried hooking in my DVD player via 2 different hdmi cords to make sure that it was the direct tv box that was the issue, but the DVD wouldn't work either....just a blank tv screen (but its on). Any ideas on what could be wrong? I can change the channels, the remote is still


It's possible that you have a faulty component on one of the circuit boards inside your tv.\015\012\015\012It sounds like your backlight is working OK since the screen is lit up despite having no video so the fault is either with the MAIN ... Sharp Aquos LC-46D62U 46 in. LCD HDTV

I have recently bought a sharp aquos lc 40 le811e tv set,im havin problems tuning it i have a new antenna installed and when i try and auto tune it says there is no signal,i have also tried 2 differant types of portable antenna made for digital tv and still nothin works,cos of this i have to continue using my digi box although the tv has built in freeview,also cos of this i cant use most of the features on the tv set,i have tried so many times to tune it but still nothing works,could u tell me w


Does it have a built in digital tuner? unplug wait 5 minutes hold power button while you plug it in you should get into a secret menu usd by techs look and see if you have a digital tuner hope that way works for that set ... Sharp Flat Panel Televisions

Goodmans ld2667d freeview not working. Tried adding a signal booster but still not working. Has received freeview from this aerial before on additional boxes


... Flat Panel Televisions

TV screen goes blank, still have sound. Is it our freeview box or the TV.


There are some firmware updates available for the DMR-XW380 that you might want to consider at least looking at. http://panasonic.jp/support/global ... Panasonic Viera TC-37LZ85 LCD TV

I have a dgtec dg-hd5370 set top box until yesterday working good, today i pressed standby and it still on the standby isn't working...bought 2 years back...do I have to buy a new one and where to get a cheap good one? I have an old style tv.thanks


... Flat Panel Televisions

I have a 26 HD ready LCD TV Model CTF2685 - it is connected to my freeview box. Recently the tv screen just goes white, but you can still hear the tv operating? can you help?


... Digitrex Flat Panel Televisions

I have i sony bravia 50in lcd tv.it was working fine then about 1 week ago i heard intermitant cracking sound after sky hd box fitted ,then yesterday it just went black no picture no sound however you can still get menus up and see channel numbers av etc


The crackling sound is possibly a suspect Sky box.I would try another input, DVD etc. I don't think the TV is faulty as you have menu. ... Flat Panel Televisions

I have a dgtec dg-hd5370 set top box until yesterday working good, today i pressed standby and it still on the standby isn't working...bought 2 years back...do I have to buy a new one and where to get a cheap good one? I have an old style tv.thanks


... Flat Panel Televisions

Database empty Sharp Aquos LC-42XD1EA showing database empty, even after constantly retuning. Analogue signal supplied by powered distribution system in house loft, and all televisions supplied by this (including other flat screens) work fine. Tried it on other ariel leads in different rooms with same result. Tried Factory Reset function, and still no change. It will play from DVD recorder, and have tried connecting to old freeview box (it gets signal and displays picture but is very gray). Any


... Sharp Flat Panel Televisions

Nikkai freeview box was working fine until yesterday eve but then came up with no signal or bad signal. Tried re-tuning but doesn't make any difference.


This would definately sound life a signal problem. Freeview signals can vary quite alot in strength.But you should have it on a solid surface to protect it from heat ... Flat Panel Televisions

I had to dismantle my LG RZ - 20LA90 tv from it's freeview box (2 scarts), vhs and dvd players and I cannot get it to work other than terrestrial tv channels - please help - my fault I should have taken a picture beforehand. The grey lead - 3 pins from TV to a scart end on the other I presume goes to the freeview box, then regular scart lead from the tv to the vhs player, aerial to the freeview box then aerial lead from tv to freeview box - help i need diagrams please! thanks


... LG RZ-20LA70 20 in. LCD Television

Samsung ps42a457 picture disappeared whilst watching,sound still present


Change input device to some other like a DVD player and see.Switch off TV, switch off power, remove plug and wait for 48 hours and retry.If problem persists, call in a qualified service technician. ... Flat Panel Televisions

I have a pdp-50mxe1 with the 5003 card how can i get ps3 xbox360 freeview box on this model


... Pioneer PureVision PDP-50MXE1V-BNC 50 in. Plasma Television

I have a Panasonic Quintrix TV and I have a new Freeview box. Just the other day my freeview box will not turn on, it's stays on standby Red and will not turn on Blue. I have everything plugged in ok scart and TV arial it just stopped working didn't touch a thing, what do you think is the problem.


... Flat Panel Televisions

I have a technisat hdfv desk top box. I have been trying to connect in via the hdmi connection. I keep getting the message mode not supported. It works fine via the scart connection. I have tried changing the hdmi cable but still get the same message. I know the hdmi connection on the tv is ok as I can run a blue ray from it. Took it back to the dealer they tried and got same message. They thought it could be a fault with hdmi on the box. The unit was exchanged. Tried again but still get the sam


You might want to see if a firmware upgrade exists for this issue in the Samsung set you have. ... Samsung Flat Panel Televisions

Samsung Ps42a457 picture clicked off whilst watching sound still present, changed power cable no change


... Samsung Flat Panel Televisions

We are installing COMCAST Digital Converter boxes into all our tv's at my hotel. But the tv needs to be on Channel 3 inorder for the digital boxes to work. Unfortunately the tv goes directly to Channel 79 everytime we turn it on and you have to manually change the channel to channel 3. I deleted all the channels and auto programmed it. But it still comes up on a static Channel 79. Then I changed the programming of Channel 79 to "BLANK" and you can still here the static but can't see it. Hopefull


Leave Comcast connected to Tv then Go to Menu and Change from Air To Cable Then run Auto Programming. ... Zenith C27A24T 27" TV

We can't the dion freeview box to scan automatically for channels because it says there us no signal. But we have a different freeview box in another room that's working fine. Because the signal went we wiped the channels so we could load them in again and start again. Now we can't get it to scan and see any channels.


... Flat Panel Televisions

New digihome freeview plus box plugged all in plus box just shows FE1


... Flat Panel Televisions

I have a thomson dti 6300-16 set top recorder box. i live in derby and have experienced the digital switch over. my tv after rescanning is perfectly fine, with no loss of service or channels. however my set top box has failed for the last 48hrs. i have rebboted several times and completed auto scans. everything works and i can watch all the channels through my set top box on my tv, my pre recorded programmes are still successfully there and working. but no information on the channels appear now


... Thomson Flat Panel Televisions

Brought a new jvc LT-32DA30J tv and for two days worked well. However I come home today and turned the tv on and it came up with a message in a box saying "no channels" found. So I tried to retune the tv still nothing, done first installation still nothing even moved the ariel to different positions and still nothing. Please can you advice me what to do


... Flat Panel Televisions

How do i install a freeview box to a lg rm-32lz50 tv


... LG RM-32LZ50 LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2364 seconds