Having problems with your Flat Panel Televisions ?

I have a relay in my panasonic ct27g12v. it rattles when i turn on the the tv. i then went to turn the tv on again and it did not do anything until i hit the relay and then it started to rattle again. it says DEG sdt-sh-1120m 12vdc tv-5 10a 250vdc on the relay. tell me if it is the relay, or how to check the relay to see if it is the relay. tell me also is it possible that it could be another problem



Answers :

The part you have mentioned does not look like the relay. By rattling, do you mean it makes a high-pitched noise wirh intervals or a series of clicking noise? The high-pitched noise is usually associated with the flyback transformer where as the clicking noise can be due to a lot of other things such as failed capacitors, Voltage protection problems triggered by failed resistors, regulators etc., So please answer my above questions so that I can help you with your problem

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a relay in my panasonic ct27g12v. it rattles when i turn on the the tv. i then went to turn the tv on again and it did not do anything until i hit the relay and then it started to rattle again. it says DEG sdt-sh-1120m 12vdc tv-5 10a 250vdc on the relay. tell me if it is the relay, or how to check the relay to see if it is the relay. tell me also is it possible that it could be another problem


The part you have mentioned does not look like the relay. By rattling, do you mean it makes a high-pitched noise wirh intervals or a series of clicking noise? The high-pitched noise is usually associated with the flyback transformer where as the clic ... Flat Panel Televisions

I am having the death click problem with my 42PFP5332D/37. When plugged in, all it makes is a rhythmic clicking noise. I pulled the back off and found the clicking noise was a relay # SDT-S-105DMR. There are a pair of them in the big board in the middle of the back. I pulled the covers of the relays and the one on the left is actuating up and down and sparking. Can anyone tell me what the cause is and if there is a reasonable fix for this.


I can tell you whats the problem , if you can tell me whether the LED at the front blinks or not. IF it does then how many times it blinks in between each pause? The relay clicking constantly is a problem associated with faulty electrolytic capacitor ... Philips 42PFP5332D 42 in. Plasma Television

I Have a problem w/ my Sharp TV 20V-S200 they appear a video in only a seconds and it fade to blue screen the sounds is ok but the video is the only problem when i always turn on the power it always appear the video in only a seconds and it always turn into blue screen please tell me the parts that i need to change thanks in advance hope someone can tell me the problem


Dear Sir:This a problem with HSYN+VSYN, you must follow the signal, and then the RGC. see the diagramGod bless you ... Flat Panel Televisions

Ihave a Toshiba DLP TV 62HM 116 ,When I turn the TV on the screen is blak and the blu light under the screen is ON , the yelow light will blink 15 times and turn off ,stay off for seconds and turn on again ,blink 15 times and turn off again .Can you tell me what the problem is ? Thank you.


If model is as indicated here start by removing and examining the lamp that set has----shattered inside? ... Projection Televisions

I have a Mitsubushi wd 73638. One day it just wouldnt turn on and havent been able to locate a problem online.We contacted a dealer that was 200 miles away(closest one to us) and they didnt seem interested in fixing it for us,but also didnt tell us what could be wrong with it. We havent done anything to it, it just stopped working one day. Leading up to this i noticed when id turn it on,it wouldnt turn on. I had to push the button again for it to turn on.Could it be the lamp? I have removed the


... Mitsubishi WD-73638 73-Inch 3D-Ready DLP HDTV

Hello! We have a Sharp 27U-F510. It has been working very well. We have only been using the remote to turn it on/off and for volume. We are using a digital converter box for channels. My wife tells me that she may have depressed and held the "lower volume" button prior to the problem. The TV turned off, and she noticed she was pressing that button. I have tried turning the power on with the remote and at the front of the TV. No effect. I have checked the power connection at the wall, an


The on\\off stwich may bad or powertransistor and eleccapacitor are bad ... Sharp 27U-F510 27" TV

I HAVE A 52' RCA HDTV THAT WILL NOT TURN ON ,AT TIMES IT SEEMS LIKE IT WILL TURN ON BUT THEN GOES BACK OFF,CAN ANY ONE TELL ME WHAT THIS PROBLEM CAN BE


Sounds like the power caps CP150 CP120 and CP114 on the deflection board. You can get the RCA repair kit by that same name from www.tvrepairworld.com the kit also comes with i ... RCA D52W20 52" Rear Projection HDTV-Ready Television

I have a Mitsubishi HD 1080 tv. When I try to turn it on, it turn itself off. Could you tell me what can be the problem and how much will cost me to fix it.


Tillung39,\012\012See my tip at http://www.fixya.com/support/r7065906-mitsubishi_turn_flashing_power_timer for more information and ... Mitsubishi WS-55805 55" Rear Projection Television

I turn on my lcd tv and it will just run for a few minutes then it suddenly turn off. can pls tell me what was its problem. thanks


Its power supply related or something is triggering the shutdown circuit because of a problem---for a 26 inch it may or may not be economical to fix. ... Flat Panel Televisions

Hi, I have a 27 inch Dynex LCD TV model: DX-L26-10A manufactured (June 09) I've been using it for tv as well as an external display for my mac with an HDMI cord. The tv was working fine yesterday, then when i came to turn it back on there was sound from the TV, but no visual but my direct tv's 'please wait' then black. nothing and a high pitched frequency sound everytime i turn the tv on. Does anyone know what the problem could be? I've tried unhooking/rehooking the cords. still i get that so


... Dynex DX-L26-10A 26 in. HD-Ready LCD TV

I have a Vizio 37inch VO37LFHDTV 10A Full HD 1080P LCD and was having the same common problem that many people describe: TV worked fine but once turned off would not turn back on unless unplugged for


... Vizio 37inch VO37LFHDTV1A FULL HD 1080P FLAT PANEL LCD

The problem that I am having with my Emerson PL-P42W-10A plasma tv is that allof a sudden it would not turned on one morning. When you turn it on the tv clicks like it is coming on then you get three blinks of the power on light before it clicks of about 15 seconds later.


3 blinks indicate that the power source is in protected mode because one of the components of the tv has failed and now acts as a short. The only way to know for sure which is the failed part is to open the tv and measure the voltages on the output l ... Flat Panel Televisions

My sony kdl-60nx720 just one year old, turn on for 3 seccond and turn off by itself, red led light blinking 3 times. Can you tell what is the problem?


... Sony KDL60NX720 3D LCD TV

Hi has anyone come across a problem with a lg 50inch plasma model no 50px4d where the tv is stuck in stand by and when you turn it on it powers up and relay goes click then 2 seconds after it clicks again and the standby light goes to a amber colour and not green but will turn off with the remote to red state and back on to amber again with the remote thanks


... LG 50PX1D 50 in. Plasma Television

I have a Polaroid FLM 3772 that when it is turned on has a whinning/humming noise and after 5+ minutes it almost completely goes away. As if it quits once the TV is warmed up and just recently the screen will turn greenish with vertical lines sometimes. The line problem will go away if I unplug and replug in the Green video cable. Can anyone tell me what this is and is it something that can be repaired and if so what part(s) are needed and where can I get them. Thanks Bobby


The humming/whinning sound is from the power supply module and it will get worst (bad caps).\012The lines on the screen can be caused by poor DC from power supply, or failing T-CON board, main baord, or worst case the LCD panel.\012As you ... Polaroid FLM-3732 Television

My Sony KDL32XBR4 keeps rebooting itself as if there was a Timer setting telling it to turn to a particular channel. It does this every couple of hours or so. There is no timer turned on, and the after the reboot it goes back to the same input option it was at. I'm wondering if that is a problem with a power supply or some kind of software issue.


Usually it will only do this when it is overheating, that is the only other time I have heard of this happening. Your also not in store mode are you? You can check this in the menu settings or you can reset your general settings, I have a Sony Bravia ... Sony Flat Panel Televisions

Hello, i would like to ask a question. My philips 32 inch plasma does not turn on and only gives a flickering red light. Can you tell me what causes teh problem? Thanks.


Sounds like a problem with the power supply or display board/main board. Time for a service call.How many times does it blink? That's a service code diagnostic to what the problem might be ... Philips 42PF9631D 42 in. Plasma Television

Hello, I have a maxent Problem with the Maxent MX-50X3 50 in. HDTV-Ready Plasma Television hello, I have a maxent mx50x3 when i turn it on there is a steady green light for power and the left and right boards also have stesdy green lights, I here all relays click and the screen primes,I think cause it lights up slightly but evenly..I hear a buzzing coming from the board on the left as you look at the inside from the rear and after a few minuets you can see flashing rainbow lines horizontaly ac


... Maxent MX-50X1 50 in. Plasma Television

When I first turn my tv on the picture is extremely fuzzy for about the first fifteen minutes and then it's fine can anyone tell me what the problem is


Sounds like if you are connected via a coax fitting you may have a bad tuner in the set--if issue is not there when a DVD is used you may be able to get around the issue by routing signal thru the rear audio and video input jacks the set should have. ... Hitachi Flat Panel Televisions

Problems to turn on - Dynex DX-L19-10A LCD TV


... Dynex DX-L19-10A LCD TV

No sound TV works fine except for sound. After turning the TV on and off a few times, the sound will come back and all is fine. Can you tell me what the problem might be regarding the sound? Thank you . . .


Do you have a cable box here? ... Flat Panel Televisions

My tv turn on about 1 muniute than black out ?plese tell me what's problem with tv Sony KDF-E60A20 60


Hi Tommy, it sounds like the inverter board is going out. Depending on age of television, it would be worth getting an estimate from service company. Try and recall if there has been any power outages, power surges, electrical strikes, etc. that may ... Sony KDF-E60A20 60 in. LCD HDTV

Insignia NS-LDVD32Q-10A TV, MENU is always displayed when the TV is turned on. Reset to factory settings and unplugging the set did not fix the problem


... Insignia NS-LDVD32Q-10A LCD TV

I have a 46HX83 Cinema Series Rear Projection HDTV, when I turn on the set the picture is on but the entire screen is a purple color with wavy lines and stays that way. Can you tell me what the problem could be and is it worth repairing?


... Toshiba 46HX83 46 in. Rear Projection HDTV-Ready Television

I have a lcd 32 inch bush tv and when I turn the on the bush sign comes up then two flashes of light thn black screen. Could u tell me what the problem is please


HelloThere is some short circuit inside the circuit baord. Normally, T'Con board should be suspected. ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1315 seconds