Having problems with your Flat Panel Televisions ?

I have a Maxent MX-58HPT51 model P58H10NJA. I bought it in 2007, have been using it for years. I recently moved houses and brought the tv with me. When I plugged it into power at my new house, the LED did not light up and the TV will not turn on. I know the outlet is hot, tried different plugs. I currently have the back cover off and none of the boards or transformers look like they're fried. I'm stumped, please help. Thank you, Matt



Answers :

Try resoldering the parts at the power supply section and check also connectors make sure that there are no loose connectors.press down fuses make sure it have contact on the board If you have a multimeter measure the continuity of the power cord replace the cord.if it has an internal cut.
Try this steps first and let me hear how it goes...good luck!

Hi
\015\012


\015\012

If you find your television does not power up properly, you need to troubleshoot the problem. The exact reason may vary, and hopefully you are able to correct the problem. (If the TV has shorted due to an electrical surge, you can't do anything about it).

Press the power button on the TV and not the remote control. It is possible the remote control's batteries are dead. If the TV does turn on, you know you need to replace the remote's batteries.

\015\012

Disconnect the power cable from the TV, then insert it into a different electrical outlet. On occasion outlets are damaged, and do not provide a power current. If this is the case, changing the electrical outlet connection corrects the problem.
\015\012

Switch the television's input to a different connection. It may be possible you have the wrong input selected, causing the TV to give off a black screen.
\015\012

Connect a different source device (such as a DVD player or cable receiver) to the television. If the source equipment is damaged, you will not receive an image from the hardware. If the TV still does not display an image, there is an electrical shortage in the interior of the TV. To see if there is any way to fix this issue, you need to take it into a local TV repair shop.
\015\012

Also it could be just a few bad capacitors on the power supply, if you want to attempt the repair yourself you can do a visual of the power board caps will appear swollen on to.
\015\012

It is not recommended that do it yourself, but depending on your knowledge and technical ability you may be able to. With the back removed you will usually see two circuit boards the upper one is the power supply, it has a few capacitors on it (cylindrical standing straight up soldered in mark on the sides with the positive/negative sides and MF and Volts values) usually I replace about four of them (or all the bulged on top ones) .
\015\012

The power board and back unscrew with a medium Philips screwdriver, if you do not know how to desolder and resolder then do not attempt this as you may damage the TV more than fix it.
\015\012


\015\012

Also check this link to troubleshoot your problem,if it helps:-
\015\012

http://www.brighthub.com/electronics/home-theater/articles/64869.aspx
\015\012



Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com

\015\012


\015\012

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Maxent MX-58HPT51 model P58H10NJA. I bought it in 2007, have been using it for years. I recently moved houses and brought the tv with me. When I plugged it into power at my new house, the LED did not light up and the TV will not turn on. I know the outlet is hot, tried different plugs. I currently have the back cover off and none of the boards or transformers look like they're fried. I'm stumped, please help. Thank you, Matt


Try resoldering the parts at the power supply section and check also connectors make sure that there are no loose connectors.press down fuses make sure it have contact on the board If you have a multimeter measure the continuity of the power cord rep ... Flat Panel Televisions

TV was working fine. Shut it off, all power went, no red light or any other sign of power. Will not turn back on, as if no power source. Unplugged for 1 hour, plugged back in again, nothing, uplugged over night, plugged it in, still nothing. Tried other outlets. Checked the safety fuse, it is good. This TV is not over used (2 adults), TV is 2 years old.


Hello,ok you have done almost everything you can do with a no power on Tv problem, if you have the tech background you could try using a volt meter to see if the TVs power supply is getting the power it needs or if there is a lose wire on the p ... Element Electronics FLX3711B 37 in. LCD TV

Viera TC-P50ST30 My TV is DOA. No power, sound, etc. No standby light. Confirmed house fuse, batteries, plus, etc. good. Tried unplugging for awhile. Makes a noise when I plug in to powerstrip or directly to wall. Someone said possible short. Pulled back cover. Checked ribbon between power supply and main board. Meter reads 5 when main not plugged into power. Drops to 2-3 when plugged to main. Is that where the short is? Isolated main by disconnecting all other connections to main. Should I ju


This may help... ... Panasonic Viera TH-50PZ85U Plasma TV

My TV will not power up. I have a PN58C7000 Samsung TV. I have tried up-plugging it and plugging back in. As well as changing outlets. The Red icon in lower right corner is not illuminated either.


Hi there, first thing to check would be the fuse in the plug.hope this helps ... Samsung PN58C7000 TV

Have a Samsung LA32B450C4D that has worked fine up until recently. I now always get choppy digital 5, 50 and 55. Troubleshooting - I tried a cheap and nasty chinese LCD TV on the same antenna cord/outlet and got no problems. Then ran an antenna cord to the Samsung from another outlet and all was fine. Problem still there when Samsung plugged back into original position.


... Samsung LA32A450 32 in. HD-Ready LCD TV

We bought a new Bush 42 Inch 3D TV about 4 weeks ago and came home today to discover it would not switch on. To begin with the red light was on but the remote control was not doing anything. When we turned the TV off at the socket and then turned it back on again the red light did not even come on and we still cannot watch TV. Nothing happens when we push any of the buttons. We have tried the TV at different outlets and have changed the fuse in the plug. Is there some way we can remedy this?


... Flat Panel Televisions

My Samsung Plasma 42 in. TV turns itself off after a couple of minutes of being on and then makes a clicking sound like its trying to turn on again but it doesn't turn back on. It just makes this clicking sound. If I unplug it, sometimes it will function normally again and sometimes the same problem occurs. We thought it might be the power strip so we plugged it into a different outlet. At first, this seemed to work. Then, the cable box and the sound system started turning off spontaneously


Try checking the standby mode. . . ... Flat Panel Televisions

Akai pt5492 shut off by itself this morning, wouldn't turn back on. This afternoon I turned tv on and the red timer light came on, no picture, no sound. Checked batteries, unplugged and plugged in a different outlet with no change. What do I try next?


First is the Akai name is owned by Samsung--and here is a general answer:Red light is shutdown or means only standby light is on.I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are goo ... Akai Projection Televisions

We have a VIZIO VP422 HDTV10A. It would not turn on and we noticed the logo was no lit up so we unplugged it and plugged it back in and the Vizio Logo fades from green to black. We tried several different outlets and the same thing happens. Is the problem the power supply? Thanks, Laz


Hello,The issue you describe is consistent with a power supply board issue. This is the board where the AC goes to. This problem may have occurred as a result of irregular power supply, or excess power supply or power surge.Th ... Flat Panel Televisions

My samsung plasma tv shut off and wont power back on. when i unplug and plug back in it will click 5-6 times like its trying to turn on while the red led flashes then it stops until you unplug and re


... Samsung PN51D530A3FXZA - 51inch 0pdp Hdtv & 1080p

Mitsubishi WS-65809. Yesterday, plugged into the wall in the first outlet, I powered off my modem and computer (trying to get Cox to fix my internet connection) that were attached to a power bar in the second outlet. TV was turned on. Once I got my internet connection working, realized that the TV was no longer turned on, and would not turn on. Made sure plug was seated right, but no dice. Checked the outlet to make sure it was working, and sure enough it was. Plugged the TV to another outlet, n


Hi mikalkintner,\015\012\015\012Is your tv haven't a led light in the front panel? I need to know to assist you further.\015\012\015\012Jdvillanueva ... Mitsubishi WS-65809 65" Rear Projection Television

Push power button, red light comes on for two sec. and then go's off. i've unpluged and plug it back in no change. but when I plug it back in it tries to come on .and right back off again.


... Hitachi 53UWX10B 53" Rear Projection Television

No sound at all on Mitsubishi LT-52151. Fixed before by unplugging, waiting 30 seconds, plugging back in. Was occurring more and more often to the point of having to do this every time I would turn it on. Have let it go several minutes and tried plugging it back in. Nothing getting the sound back this time.


Just fixed this on my TV today! (after 2 months of the sound intermittently failing to turn on and failing completely yesterday) Go to Mitsubishi-tv.com. Go to support. Enter your model number. You will be directed to the documentation for your model ... Mitsubishi LT-52151 52 in. LCD HDTV

I accidently plugged into the service port on the back of the TV. Immediately shut down and will not turn back on. I have tried to reset it the way Visio stated. (Unplug, wait 30 seconds, plug back in and turn on) Is this just a fuse or something simple - or have I trashed the tv?


You have destroyed the Micro Processor. The main board must be replaced. ... Vizio 42 in. LCD TV

I have a hyundai plasma tv 42 inches. Yesterday I unplugged the tv because i needed to use the socket it was plugged into, but when i plugged it back in, the usual red light on the main tv button wasn't on and it wouldn't turn on. I know it's not the fuse in the plug because I've tried swapping it with other things and they seem to be fine. I've had it for about 2-3 years and sometimes when there is a blackout down my street it takes a while for the tv to turn back on. do you know what the probl


... Hyundai ImageQuest HQP421SR 42 in. HD-Ready Plasma Television

Just replaced lamp, when we try to turn it back on the tirmer light flashes green and then the lamp light flashes orange continuously and the tv will not turn back on. We have tried plugging and unplugging the tv and the reset button nuerous times and the tv will not turn back on.


Ljanicke,\012\012From your description of the lamps and after looking at the error chart for the unit I believe that you have a problem with the lamp door. There is a switch on the cover which can get moved or misadjusted while replacing ... Mitsubishi WD-52525 52" Rear Projection HDTV

I have a mitsubishi WS 65711, we were watching a dvd and the tv shut itself off and wont turn back on now. When u press the power put it acts like it will turn on then a second or 2 later will shut itself right back off. The green light doesnt blink or anything. We tried unplugging it for a while then plugging it back in. We also tried resetting it but that didnt work either. Can u give us any possibilities as to what to check for, like a fuse. Or what u think it could be. Thanks for the help.


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current pass ... Flat Panel Televisions

My television just went off! We tried to turn it back on but it wouldnn't come back oh. Finally the button flashed red like it was trying to come on and we heard 2 or 3 words then that was it.then the blue power button just kept flashing. we like to never got it to turn off. Its a 50" hitachi flat screen plasma model # 50H401A. Someone told us it may be the power supply the power cord plugs into on the back of the TV? TV is 2 years and 5 months old.


For more info on this set please check out http://www.hometheatershack.com/forums/hitachi/38229-hitachi-p50h401-le ... Hitachi P50H401 50 in. Plasma HDTV

Hello. my samsung HL61650A 61'' DLP tv is about 2.5 years old, and tonight it just shut off. tried to turn back on, got 2 'buzzing' sounds from the back, but it wouldn't turn on. unplugged, undid back cover, put blue switch to 'down', still no luck. now, it won't really even try to power on, and standby & lamp LED lights blink. do you think it is solely the Lamp that needs replaced? help!?


... Samsung HL61A650C Television

If the yellow input plug - it's nipple broke off in the main adapter plug in back of tv -( cable adapter nipple) is broke off in yellow input stationary outlet in back of tv ? How can you remove broken piece ? Thanks


You will find it easiest to take the back cover off and gain access to the rear of the socket and push it back out. ... Vizio VO47L 47 in. LCD TV

My tv won't turn on... Its pretty new, just bought it in January. No lights, no nothing. Yes it was plugged in, yes I have electricity running through my outlets, yes I've tried it in other outlets, yes my remote has batteries, yes I tried the 'Power button' on the tv, and NO I'm not an idiot... Dave Barbee


Sounds like the power supply is bad. If you purchased the unit new in January 2011, contact Phillips for warranty repair. Call 1-866-771-4018 between 8 am and 11 pm Monday through Saturday or 9 am - 6 pm Sunday. Have your model number, purchase date ... Philips 47PFL6704D LCD TV

When I plugged my laptop up to my polaroid tv I forgot to have the tv, and my laptop off when I did it. It got stuck on that screen and I tried to turn it off, and it took about a minute to turn off. Then, when I tried to turn the tv back on it had a red light on it but the screen was blank. So basically it will not turn back on now.


... Polaroid FLM-2601 Television

Ijust purchased an LG G2X with HDMI output i have a NS-CD47HD-09 LCD with 1080p its only about 2 years old...I went to plug in the HDMI to HDMI1 in the back and plugged in the micro end to my phone under HDMI settings it could not automatically read the resolution that is supported(which works on every other tv tested) so i manually chose the 1080p icon...(tv monitor does not support):/ hmmmm thats what i paid for. so i tried 720p same 576,480p same thing on all HDMI ports please help!! i tried


... Insignia Flat Panel Televisions

Hello, I have a LCD TV. MITSUBISHI Mod. #LT-40133, the right side of the tv. when the tv get hot (after 30 or 40 minutes) show vertical lines that cover almost all the right side. We replaced the Logic board, but the problem persist. Additional thing: if you hit the back cover in the right side, the tv get fix for some minutes (5 or 10),after that, the problem come back.


Your logic board isn't at fault. You need to replace the backlight inverter. It sounds like it is overheating...then causing your LCD panel to over heat...causing the line problems!The backlight inverter is located in th ... Flat Panel Televisions

3-yr old Samsung HL-S46765;symptoms indicated lamp diing; finally TV would not turn on;un-plugged tv, removed lamp to verify code and make (Phillips);put in new lamp; TV turned on for about 30 seconds;all indicator lights went out;tv shut off; all indicators lights blinking (lamp problem). unplugged tv, removed lamp housing; put back in; plugged in.; waited; tried to turn tv on - tries, then indicator lights start blinking


Thank you for posting your question on Fixya. In such a case the first thing to check would be to see if the lamp is coming on momentarily before it shuts off. For this please remove the back cover of the tv and fire it up. Please check the status of ... Samsung Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2218 seconds