Having problems with your Flat Panel Televisions ?

I have a Vizio TV VO320E model that I bought with a bad image problem. I have sound and it responds to the remote. The image is white with vertical lines that move across the screen. The T-con board is attached to the LCD panel, it is a small card measuring 1 "x 16", Two flat cable going to the LCD. I do not know if the problem comes from the main board or the T-con board (attached to the LCD)? There are several main board for sale on Ebay. Can you help me determine which one is failing.



Answers :

Hi.based on my experience in repairing LCD TV's according to what you describe the problem must be on the T-con board however do first some re soldering on the t-con board and re tighten all the connectors on it.A loose cable connectors could result on same kind of error.you can also try to reset the main board.take a look at the main board if you can see a small tap switch press it while the power is on it should reset the picture to normal..at the t-con board,look for a surface mount fuses fuse is labelled as F" measure the continuity if open replace it.If all of this solution did not work you can replace the t-con board or please post the photo of your TV picture display and I will analyse it first.thank you!

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Vizio TV VO320E model that I bought with a bad image problem. I have sound and it responds to the remote. The image is white with vertical lines that move across the screen. The T-con board is attached to the LCD panel, it is a small card measuring 1 "x 16", Two flat cable going to the LCD. I do not know if the problem comes from the main board or the T-con board (attached to the LCD)? There are several main board for sale on Ebay. Can you help me determine which one is failing.


Hi.based on my experience in repairing LCD TV's according to what you describe the problem must be on the T-con board however do first some re soldering on the t-con board and re tighten all the connectors on it.A loose cable connectors could result ... Flat Panel Televisions

Changed the main digital board it was the same they told me on the tuners there is a number it should match the original one like my original is n7hf but i dont know if somebodey changed it before i change the board twice it was the same problem. now my question is if the tuner number is different what problem does and how iam gonna know what was the original number on it


If the part number and revision version match , then you can forget about everything else. The part number will be printed on the board itself or it will be on a small label on the board. Post all the numbers you see on both boards(the board that you ... Sanyo DP32746 32 in. LCD Television

I have a LT37HVS Olevia flat-screen that has a similar problem to one of the posts. I had the same blue standby type light on the front that stays lit, but turning it on just makes this light blink, and no display. I did as the posts here sugested, peeled it apart and manually inspected all of the capacitors. To my dismay I haven't seen one yet that looks bloated or leaky. I have inspected the main power supply board, both display boards and the main board. There were a few capacitors that


If turning it on makes the light blink then its a clear case of open circuit.. Honestly there are lots of components like diodes, fuses, transistors etc., and either of them if shorted create an open circuit. I do not think this is a capacitor proble ... Olevia LT37HVS 37 in. LCD HDTV

Hi, I have searched all over internet and I think you are the only one who may exactly know whats the problem. I have a Toshiba Regza 37" which has no picture but sounds works perfect. The thing is if you really focus the picture is there but its too dull and dark to see it properly. Ive heard something about switching T-Con board.. please let me know which one of the boards is that(any sign or specific connection?) and where can I buy one? Thank you very much and best regards kamran


If you can see an image and it's OK - no distortions or corruption - then it's not an image problem, it's a backlighting problem. This means that the faulty part is not the T-con or any other board that works on the image, it's the inverter - the bo ... Flat Panel Televisions

My plasma samsung ppm63mf7: no power, all caps OK, ceramic fuses OK, I replace a failed sustainer board. Now power just clicks and blinking power lightrnSo I unpluged T-con board and Main board to check for shorts but problem persist.power board# bn96 03736a* does any body have experiance with this model Tvs


I had a similar problem with mine, i had to change couple of caps but it still would not power on. I ordered one online and it seemed to solve the problem. the power supply board for the TV are a bit expensive but this guys over at had one for under ... Samsung PPM63M7F 63 in. Plasma TV

Sony kdl32 it uses t con board y320ab01c2lvo-1 could my problem be main signal board should I bring up menu it shows good but same menu characters also vibrates


... Sony Flat Panel Televisions

IS THE T CON BOARD CHANGEABLE FOR THE Vizio E3D470VX , IF SO WHERE IS IT LOCATED , I have a thick grey line in the center of the tv , Is there any other fix for it , I know its not the main board , I changed it , Are there any ways of trying ajustments to remove it, thank you


... Toshiba REGZA 52RV530U LCD TV

Hello, i have the sony flat panel display, model fwd-50px2, and as somebody says, when i plug it, red power light come on, i push it to turn on and the green light come on, makes a click and sounds like doing something but no image on the screen, it stays black, i think could be a board, because the fans don't work either, so, i writting you to ask which board i need to get, or what do you think the problem is, i really appreciate your help. Thankyou so much.


... Sony FWD50PX2/S 50 in. Plasma Television

I have an Acer AL2416W monitor which is playing up. When switched on it gets very bright after around 20sec and develops bright vertical lines. The images is frozen and the whole monitor goes dark (but backlight still on) within a minute. Seems like the t-con board? Has been serviced before with the same problem, but am not keen to put too much money in again. Likely to be the t-con, how much is it and where do I get it?


... Acer AL2416W 24 in. LCD Television

I have a samsung lcd tv model LNS-4095DX/XAA. I am getting snowy particles throughout the image. The picture looks great except for the pixel looking particles throughout the screen. I have already replaced the power supply due to some bad capacitors. It was alot worse before the new part. Do you think it is the T-Con or main board that needs replacing? I checked all the connections and tried different cables to see if it got better, it did not.


... Samsung LN-S4095D 40 in. LCD HDTV

Screen fades hello..... I have Samsung 32 Inch LCD TV. When i turn it ON it displays everything fine,but after 1 or 2 minute white color fade from bottom to up.then I connect the TV to my laptop the problem remains the same. I put only a black color image on TV and kept it about 1 hour but there is no fade. Can I solve it? but my tv's T-con board is non-removable


... Panasonic TC-32LX50 32 in. HD-Ready LCD Television

I have a vizio plasma vizio p42hd or type no sp42a The left half of the screen just went black with colored vertical lines behind the tv there is a black box also attached to the main digital board what is the problem u think


Hi,I am sorry for the trouble. Unfortunately, this is an internal problem and needs repair.The most likely suspect is the control board(located under the main \015\012input board). The board is hidden unitl you get under the input board. ... Flat Panel Televisions

Convergence issue I apologize for not having the exact model number. I have what seems to be the typical convergence issue with my TV. I have pulled out the board and tried resoldering the 2 main chips but the problem came back. I would like to purchase chips for this but I want to make sure I order the correct ones for the 42" set. Do you know which chips that I need?


It depends on which model you have. You will also probably need to replace a few resistors. ... Projection Televisions

I have a baird x47dtv and we turned it on today but had no picture or sound. the blue power light comes on and flickers as it should on startup of tv,however we are still not recieving a picture. i have replaced the psu's approx 6 months ago so i know theres no problems there,but am unsure which part i need to replace as it could be 1 of three things. 1 it could be the main board, 2 it could be the power invertors or 3 the screen. any tips would be helpful


Tried to disconnect first the supply voltage of the inverter board and then turn on the tv. if the indicator stay which mean the inverter board would be the cause of shut off or the tv turn to safety mode. ... Flat Panel Televisions

The problem i am having. I want to know were can i find a main power supply board for a Model: 47LC55S240


If you don't have a tv repair shop in your area then the best place to find one is on EBAY.\015\012\015\012Here is a link to one I found on Ebay.com:\015\012\015\012 ... LG Flat Panel Televisions

Sony kp-46v15 convergence problem dont know were to start on adjusting main convergence board in front were do i start there is 15 or so red green blue ajustments for horizontal and the same for vertical need help in understanding were to start


Do not mess with those, they don't just go out. they are also for skew linearity, heighth, width for vertical and horizontal adjustments. If your convergence went out need to find convergence circuit and look on the plugs for your vcc voltages goin ... Sony KP-46V35 TV

NS-51P680A12 WONT turn on. just popping noise behind the tv. searched it online, seems that a lot of people with insignia flat screen tv from 32" all the way up the the 50"s are having problem with either the capacitor on the mother board or the voltage regulator. how do i know which one to replace or to be certain for sure. thank you


... Flat Panel Televisions

Multi-colored vertical lines fade in and out, sometimes with image ghosting on my Samsung LN46B650. Is this a T-Con board or TAB problem? Thanks.


Tab Bonding Issue. I too have had this problem with the very same model, it is most often \012improperly diagnosed as a t-con board issue by most who just want to \012provide an answer for the sake of there own ego at various forums. This \012is ... Samsung LN46B650 46/49.5 in. LCD HDTV

Samsing 50 inch Plasma- Main Board BN94-01658A Problem


Its either bit the bullet or buy a new set here--you are going to have to try that board to see if it cures it or not. Where did you price the board?The main board should have a number of large flatpack chips so that price may be ... Flat Panel Televisions

I have a Samsung LN-s2651d LCD tv that black screened on me and I don't know if the sound works because I have the internal speakers turned off... I use 5.1. I have been told that it is the t-con board and would like to know if there was any way to determine this with some certainty before I go buy the part. Or, could it be something else besides the t-con board?


... Samsung LN-S2651D 26 in. LCD Television

M228WDP-BZ - Pure white screen. Power supply board checked. Voltages through connector to main circuit board OK. Changed main circuit board without any improvement. Need to know the voltges that should be found at the connectors from the power supply board to the screen?


... LG 42LC7D-UB Television

Image flip my LC-37SH12U stopped working and I replaced the tuner board with the same part number and the TV turned on. Unfortunately the image is upside down, and this Sharp TV doesn't have the picture flip option. I tried another tuner board with the same part number and the image is again flipped. Anyone know how to flip this image ?


... Flat Panel Televisions

I have smasung dlp 6756/xaa after replace SMPS main board, when i turn on the tv I got burning smell found middle of the tv section hehind screen wheel looks like electrical signal cable burned off, i already changed lamp, changed SMPS board and finally burned off cable. I am tired of this process, right after 1yrs late since i bought it starts problem. first symtom was light blinking, on and off, so i replace lamp, and changed SMPS board and more and more. some say digital board problem or so


... Samsung HLT6176S Television

Whenever i plug my sony bravia KLV-32U300A, it click twice and doesn't turn on,power sign goes completely off. I have to unplug from the power source, wait 5 mins and try again, it rarely turns on, but does so if you try it after 4/5 hrs. Once the tv on it works fine. how can i rectify this problem? is it from the power board problem or the main system board problem? Pls help me thank you.


Hi,\012\012This is an indication of out-of-regulation in the power supply section. The very\012common caused of this fault is the leaky\012electrolytic capacitor ... Sony Bravia KLV-32U300A 32 in. HD-Ready LCD TV

Hello, I have a Panasonic Plasma Tv, Mod. #TC-P42X1, the tv. doesn't turn on, and blinks the led of power 10 times, we found the SC board in short and was remplaced it, problem persist, now we remplaced the signal main board and the problem still, what do you sugguest for this problem?


Have you already checked the power supply section sir?power failure are often cause by a faulty capacitors at the power supply section.have a close look at the capacitors if you notice a deformed/bulging capacitors replace it and also resolder the co ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1463 seconds