Having problems with your Flat Panel Televisions ?

I have a Digitor 51cm tv Model G2100 which has had little use over the last two or three years we have had it (at a bach, so only used occasionally). It has started switching itself off at random intervals while watching it. I have checked the timer setting menu to see if anything has accidentally been set but that is showing 0 for all settings. Any ideas please?



Answers :

See if the manufactur has a bios flash and download it save it on a usb drive plug in in turn on your tv run setup and do updates

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Digitor 51cm tv Model G2100 which has had little use over the last two or three years we have had it (at a bach, so only used occasionally). It has started switching itself off at random intervals while watching it. I have checked the timer setting menu to see if anything has accidentally been set but that is showing 0 for all settings. Any ideas please?


See if the manufactur has a bios flash and download it save it on a usb drive plug in in turn on your tv run setup and do updates ... Flat Panel Televisions

On my panasonic viera tv i cannot set the sleep timer. the date/time are set properly but when i push 'menu' and then select 'timer' i am not able to select any of the options listed. please help!


If it is grayed out as an option on your menu, go down to Setup, then select Advanced Setup, and make sure "Auto Power On" is set to "off". This should then make the sleep timer function available to use. ... Panasonic Viera TC-L32X1 32 in. LCD HDTV

Set turning on and off by itself. already checked the auto on/off timer, set to off. what causes the set to turn on and off???


Check your remote and make sure the button is not sticking. if it is not check the power button on the tv. if both of those are ok you should open the back of the tv and check the powes switch. if it is dirt take a q tip and clean arround it. if none ... LG 50PC3D 50 in. Plasma Television

My 37LG30 tv started out with turning itself on in the middle of the morning, scaring the **** out of everyone in the house. Now ive checked there is no auto timer set, and no buttons on the remote a


The main board is having issues as that would account for the different symptoms. You should be able to get a replacement main board from www.tvrepairworld.com ... LG 37LG30 37 in. LCD HDTV

I have a jvc 46 inch lcd tv model LT42E478 and the picture has a lot white color i have tried checking the connections and the menu setting in picture mode i even set it back to factory defaults have you ever herd of this problem


Yes and in several brands it is not uncommon= the main board and others communicate and control this function= means it could be anywhere--not easy except by subbing boards to find---Shops will either do that or use a scope and expensive signal gener ... JVC HD-56G886 56" Rear Projection HDTV

Set sleep timer menu on a SLED2490


Turn sleep timer on and a section should light up ... Sansui 24" Widescreen Led 1080P Hdtv

I have a samsung tv model numbertxb2735 and i cant seem to auto program channels. I bought a universal remote and all that pops up when i press the menu button is how to set the timer. i need help!!


Universals are hardly universal----if you want results here buy an original remote from Samsung---yes will cost more but will work---your time and aggravation are worth something if can be avoided. ... Sony FD Trinitron WEGA KV-27FS100 27" TV

Once powered off (night or day), set will not power up except by intermittently pushing the power button (from 10-25 minutes). Have replaced bateries in remotes, checked menu functions, and disconnected VCR. Can you tell me what is the problem.


Witut,\012\012Since this is a Sony if there are any problems during startup the standby light should be blinking an error code. It will blink at approximately one second intervals for the code (1 to 10) followed by a 3 second pause, then ... Sony Projection Televisions

TV turns on and there is sound (white noise type) - audio will not come on - checked sound menu and mute button for correct settings - no luck on audio


Visit the site named 'Electro-help' for\012more details. Click this link. View it in \012"Timeslide" or "Flipcard" option, which can ... Sony FD Trinitron WEGA KV-32FS120 32" TV

Lexsor I have a black screen with sound. It is connected to a virgin cable box. I cannot access the source menu button from the remote or the TV set itself. When the TV is powered up a small blue box appears saying searching...then the tv pictures appears for half a second. I have rebooted cable box several times, checked cables, changed scart leads- no change.


... Flat Panel Televisions

TV has sound but no brightness. I think I can barely see images of TV show but not enough brightness ti go to menu to try and check brightness setting. I tried powering down for one minute and then over ten minutes but didn't help.


The brightness setting would never go so low that the menu would be invisible - this is a hardware problem, a part has failed. In a plasma tv the image, in all its brightness, is generated in the screen itself. If you still have the full image ... SNK Magnavox 42MF231D 42 in. Plasma TV

I have an LG 42PG60UD. I am unable to access the menu on this set which I have had since new. If you press the menu button on the remote or the bottom of the set, the menu bar comes up on the screen. If you try then to select any of the sub menus, highlight them and press enter, the TV reverts back to normal viewing and the menu icons disappear. I am therefore unable to access any of the settings in this TV. I feel I need to get it back to the original factory settings so that it can update its


Did you try the buttons on the tv? See if it works and let me know. I am starting to think it needs a firmware update though ... LG 42PG60 42 in. HD-Ready Plasma TV

Toshiba 32BL505B- 32 inch TV - Lack of settings - No Installation, or TV Settings.. Please Help


1. Press the menu button on the remote2. Once the menu comes up press the numbers 7935 in succesion3. This should bring up the hotel menu, turn off the hotel mode at the top of this screen4. Th ... Standard (CRT) Televisions

Menu controls I have a 22" Luxor 22-860-cob television. Recently when I turned my Xbox on, the screen displayed in black and white. I have had this issue before and managed to deal with it by changing the PAL settings in the TV menu. However since then I have broken the Luxor remote and I am using a top up tv remote instead. When I am trying to change the PAL settings this time, I can access the menu but cannot scroll through it or change the settings. Is there a way I can control the menu using


Can please help ive a 32 luxor tv which has lost vol and need reseting to get vol working but not got pin number ... Flat Panel Televisions

How to reset eeprom(service menu settings)


This is the reason I am careful about walking people into the tech menu on sets--one wrong move and poof!If you by a miracle find the full service manual it would have the information needed (if set has this) for a hard reset---other wise you ... Samsung HCP4252W 42" Rear Projection HDTV-Ready Television

What's your problem?I have Samsung CS-29Z57MQ (29in CRT Slim TV) and due to curverd corners I tried to set using service menu (info - menu - mute - power). While setting I accidently pressed INFO button again and it auto changed some G2-Adjustment values. I switched off the TV. From after that TV is not turning on, its on standby mode and when I press power button or service menu button I only can hear the click but again no picture comes and it goes to standby again.


... Samsung Standard (CRT) Televisions

Hisense HL81V88 Have just disconnected my Austar Box and plugged in for normal TV. Have auto tuned the Tv several times however channels not being picked up. Have checked to ensure antenna coax connections are correctly installed. Have now reset to factory settings. have auto tuned again and still no result. Thought it maybe related to the system setting needing to be set for Australia BG however dont know how to bring this screen up to check this. Cannot bring the TV back to original first time


... Flat Panel Televisions

Upon my return from being out of town yesterday, when I turned on the Phillips 50PF9830A flat screen TV (circa 2005, but has worked perfectly all this time), the settings MENU popped onto the screen, and will not go away. The TV is connected to a Comcast cable box and BOSE surround sound system. The only way to move through the MENU screen (with all the settings options) is to use the original Phillips remote. But, there is NO way to get the menu to disappear from the screen. If you navigate


... Philips 50PF9830A 50 in. Plasma HDTV

Kenmark 22LVD02D digital tv - had to replace arial cable and now tv wont pick up the digital channels. Other tvs work with the cable so arial and cable working. Message appears telling us to go to Settings menu to add new settings but there is no settings menu.


... Flat Panel Televisions

JVC AV-36D502 belonging to my 99 year-old father somehow got set to close captions (i managed delete the closed captions) and SAP. i cannot get the SAP setting changed to STEREO. using the menu i can get STEREO highlighted, but the TV is still in SAP mode. i don't understand exactly how things are selected in the menu--the manual says toggle up and toggle sideways, but says nothing about how to lock in changes. best i can do is make changes and quit the menu, but the SAP selection is unchang


... JVC AV-36D502 36" TV

I changed the almost every setting in aging menu of Aiwa A2119 TV. Channels were reduced to 99 from original 209 channels and picture quality has become very very poor and dark. Please communicate to me the factory aging menu settings of the TV. Thanking you people in advance.


... Standard (CRT) Televisions

I have Lg TV model Number is LG 32ls5dc Volume stay on mute and I can not go to set up menue. I belive this TV is comercal Ans i have to put some code to open the set up menue and volume.


... Flat Panel Televisions

I purchased a Toshiba LCD TV/DVD 22 DV500B for our great grand daughter in setting it up, I went through the auto set up, then it asked annolog yes or no I pressed yes thinking I would get a few extra annolog channels for her, all I ended up with was 4 good annolog channels and one not so good. To retune the manual states. Press MENU on the remote. Select SETUP and then INSTALLATION. I press menu but only get picture/sound quality changes. 6 different areas of change but no SETUP


Hey, i had this exact problem, made the same mistake with selecting yes. Worked out the solution is to press the source button, then scroll down one to DTV/USB, and this will be the free view. Hope it helps, Ben ... Toshiba Flat Panel Televisions

My HP LC4276N TV is 27 months old. A few days ago, the sound just ceased working. Of course, I checked the settings to ensure that "mute" was not activated and that the setting for speakers was "on". I then also tried connecting auxiliary speakers, but to no avail. Could this have been caused by a blown fuse? A bad capacitor? Or is there another likely cause? I would love any detail on how to check any of these potential problems, or any suggestions for repair. (I have no experience in t


Hello\015\012You haven't specified anything about its picture condition. Anyway, picture is correct, and only sound has probelm I assumes and answers. If picture is OK and oly sthere is no sound at all, check the speakers first. You can chek ... HP Lc4276n 42 in. LCD Television

Acoustic Solutions 32in LCD32761HDF TV Headphone socket entry in the audio menu not hightlighted so cannot use my headphones!! Also aspect ratio settings in HD channels are not right. i.e. 720 on the V box leaves black lines on the tv display and 1080 wide makes objects look too tall! What are the settings for Virgin V Box (HDMI) and your TV? andd how do I change them in the picture menu? Carole


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0953 seconds