Having problems with your Flat Panel Televisions ?

Helo, I have problem with HDMI on SONY KDL 26U2000. I bought digital satelite complette with HDMI. I connected it to TV. But video and audio signall is sometimes shortly breaking. More times on HD programs. My service engiener checked cables - all are OK. He checked satelite signall - all are OK He checked satelite complete with another HD TV (Philips, LG, Samsung...) in his company. HDMI on satelite complette worked correctly. I would ask you about help. Thank



Answers :

Sony's can be picky about HDMI.
Check for software update that addresses HDMI issues.
Contact Sony for software. ! 800 SONY USA

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Helo, I have problem with HDMI on SONY KDL 26U2000. I bought digital satelite complette with HDMI. I connected it to TV. But video and audio signall is sometimes shortly breaking. More times on HD programs. My service engiener checked cables - all are OK. He checked satelite signall - all are OK He checked satelite complete with another HD TV (Philips, LG, Samsung...) in his company. HDMI on satelite complette worked correctly. I would ask you about help. Thank


Sony's can be picky about HDMI.Check for software update that addresses HDMI issues.Contact Sony for software. ! 800 SONY USA ... Flat Panel Televisions

All 3 HDMI ports aren't working showing "no signal" (my main problem), but only port(input/source) on whole tv that works is RCA input/source(A-V,Y-R-W cords)


... Curtis LCD3227A 32-inch LCD TV

Foxsat-HDR 100GB, 2Yrs. old. Problem--HDMI Feed to LG32LC2RR Television---Audio OK but NO Video--OSD--"No Signal" message. Check-- HDMI Feed from DVD Player-- Audio and Video--NO Problem. Check-- SCART Feed to Television NO Problem. Check-- Changed HDMI Cable--- NO Cure. Regards, Ray Parnell.


... Humax Flat Panel Televisions

Possibly did something in settings, as tv wont pick up signal on any input. it stared with my hdmi input....one day my sons ps3 no longer would work on tv. I figured hdmi input went out after I tried changing every setting in the input mode. Cable and wii still worked fine. one night I went to turn his tv off and hit wrong button. from that night on tv wont pick up signal on any input. No cable at all. Actually have cable coax, not hdmi for cable


... Haier HLH32ATBB 32 in. LCD HDTV

My Emerson 32'' TV HDMI port seemed to have gone out on me. When hooked up to my PC or gaming concole, the screen shows red all over behind what is suppose to be scene. I checked to see if all other components are working properly, and yes everything else on the tv works properly except the HDMI port. What part would I need to replace it? What is the exact name for the part?


... Flat Panel Televisions

For some time now, my Samsung DLp rear projetion tv (HL-R4667W) gives a "no signal or weak signal" on all inputs. After being on for a perdiod of time, which seems to be lengthening, it will pick up the HDMI input. It still is hit or miss with other inputs, such as Component or RCA. I don't know much about the inner workings of TVs, but am assuming this is some type of input board issue or something. What is the problem and what kind of part would fix it? thanks.


Yes it is a board malfunction. The source of the problem in your case is the "Digital Board" which contains all the tuners and video processing circuits. Replacing it would resolve the problem. If you would like to fix it yourself, take off the back ... Samsung Flat Panel Televisions

My sharp aquos Lc-32d62u has no sound when my ps3 is hooked up through hdmi. it keeps saying "an incompatible audio signal has been recieved ,check output device signal....what do i do ?


... Sharp LC Flat Panel Televisions

My Luxor TV has stopped showing my Virgin Satellite signal. Tried checking the "Source" button but the usual 'HDMI' option has been replaced with 'YPbPr' . Anyone any ideas, please?


... Flat Panel Televisions

I have a single line that is aprox. 1.5 inches in on the edge of the screen. The line mainly is black but also appears red. It is a vetical line and to top it off it goes away once in awhile just to make my day complete. This Tv has been flawless till this point and on HD or Blueray blows away higher priced units. The tv is a kdl46w4100 lcd 120 hz . I'm On Bell sat and all my hdmi are top end monster cables. There is a well used Wi connected to it any help would be great ..........Thanks Shane


You probably have a bad solder joint on one of the matrix controllers.Below is an example on a smaller LCD, but it will give you an idea what you are looking for.As you can see, there are several controllers and each controls a "strip" of ... Sony BRAVIA KDL-40S2010 40 in. LCD Television

I am trying to fix a Hyundai TV, model HY-14N10. before it breakdown, its power LED indicator shows sign of intermittent flickering until it wont turn on anymore. i need a circuit diagram to check for normal voltages at the pins of (Toshiba ic) 8873CSCNG6UP3 during standby mode. i would appreciate it very much if you could provide me its complete circuit diagram and the pin data of the above ic and also your advice if you have the probable solution to the problem.


... Flat Panel Televisions

I have a Panasonic PT 52lcx66...Had a bulb replaced that was definitely bad...now bulb may or may not light. Completely Intermittent . Has been checked for bad solder joints & connections...everything appears to be good. Could the new bulb be causing this or would it most likely be something else . Thanks JM45


Hi,If only Bulb was installed in old lamp casing to save the money then it is the Bulb that is causing problem because low price bulb does not last longer and gives problem very soon so put Panasonic original lamp in tv to get it fixed.An ... Flat Panel Televisions

I own a Sony kdf-55e2000 , when I try to hook up a ps3 through the hdmi imputs i get a message reading "unsupported signal please check device output" i can here the sound but no picture.Is there any


Try only having the hdmi cable hooked up to ps3 and tv, turn off ps3 and hold power button for 5 or 10 seconds and you should hear 3 beeps, this should reset the ps3 and detect the settings, if this doesnt work you mmay have to manually change audio ... Sony Grand WEGA KDF55E2000 55" Projection HDTV

NO AUDIO OPTICAL OUTPUT-- NO VOLUME TURNED COMPLETELY DOWN(TO AVOID THE CRACKLE) IS TO BYPASS THE TV WITH AUDIO, CONNECTING STRAIGHT TO MY VIZIO VSB200 AMP/SPEAKERS FROM MY CABLE BOX AND BLUERAY PLAYER BUT ONLY WITH RCA CABLES- THERE IS AN OPTICAL CABLE OUTPUT FROM THE CABLE BOX ALSO BUT WOULD BE NICE IF COULD ROUTE THE SIGNALS THRU THE TV. HOW DO I ACTIVATE THE OPTICAL AUDIO OUTPUT AND TURN OFF THE INTERNAL SPEAKERS.


... Hitachi 42HDS69 42 in. Plasma Television

Laptop interference When I open my laptop, my cable, plugged in to my TV, starts reacting with interference, sometimes completely turning to "no signal." When I close my laptop, there stops being interference issues. It doesn't matter whether my wireless internet is connected or not, I've checked the line in where the cable's connected and it's happens with predictable accuracy. Please help!


All laptops must meet certain requirements for interference---about all you can do is move the laptop further away and or see if another laptop has the same issue. ... Vizio L32 32 in. LCD HDTV

Binary File Detecting... error on my TV. I have a Devant 32'. We were watching a DVD through HDMI connecxtion when we suddenly lost picture and it displayed No Signal on screen. I checked all connections are okay and I did the power reset and still not working. And now, everytime I turn my TV on it shows the error message Binary File Detecting.


... Flat Panel Televisions

Hlr4667wx/xaa will display hdmi roku signal but not hdmi signal from cable dvr


... Samsung Flat Panel Televisions

My problem is getting a "This signal is not supported message" on an HDMI input into a Pioneer PDPR05G media receiver.


... Pioneer Flat Panel Televisions

Dynex DX LCD 42HD (no signal with HDMI Port


... Flat Panel Televisions

Pioneer PDP- R05G media receiver error code "This signal is not supported" on HDMI from Nintendo Wii U.


... Pioneer Flat Panel Televisions

I have a 42 inch Magnavox with 4 hdmi ports to connect to. Only the hdmi -1 will work the others say they have no signal. When I change the tv to hdmi 2,3,or 4 and connect to the hdmi 2,3,or 4 it says no signal. I have direct tv HD.


... Magnavox Flat Panel Televisions

My Denon receiver, mounted in another room, has HDMI inputs from my DVD player and cable TV. Signal goes from receiver through HDMI into a signal transmitter and then to the TV via Cat 5 data cable and signal receiver. The signal frequently drops out, and especially if any light switches are turned on/off. Is it likely the problem is the result of an electrical wiring problem, or could it be a problem with the Denon receiver itself?


It would seem that the transmitter and/or the receiver may be causing all the fuss...or the cat 5 is having issues...the cat5 cable may have some defect...try using another cat 5(even if it's 6ft long,move receiver closer to tv/dvd and use transmitte ... Flat Panel Televisions

This RCA L26HD31 TV has always worked fine in other respects... but when I try to connect my pc's hdmi cable to it for use as a monitor, I just get "unusable signal". When this TV was made, hdmi outputs on laptops was not the norm - it was vga. Can this TV use an hdmi signal from a dell laptop? Yes, I'm using the correct input for the TV and have tried hdmi1 & 2 ports. - Thx


Make sure you have set the laptop's display properties to as low a resolution as possible (also make sure the screen refresh rate is 60 hertz) and turned it off before connecting it to the television. Turn the television on first and set to the corre ... RCA L26HD31 26 in. LCD HDTV

Philips 37PFL5603D/10 tv, connected to Humax HDR-Fox T2 recorder. We do not have the HD signal yet, but due in June this year. Problem is with the HDMI connection, mostly does not work, sometimes green picture, no sound. Also does not switch automaticaly When box is switched on or off. Will only switch properly when a scart lead is also connected. You should not have to use a scart, when you have HDMI. We need the HDMI to cope with the new digital signal when it comes. Have switched Humax


... Philips Flat Panel Televisions

Only hdmi 1 works on panasonic viera plasma tv. The other 2 hdmi's say no signal when hooking blue ray or wii to tv.


... Panasonic VIERA TC-P50ST50 50-Inch 1080p Full HD 3D Plasma TV

I have a kdl-52xbr4 and the screen will say check your output device signal not a compatible device then it will come back on with the pixels distorted in red green and blue any thoughts?


... Sony BRAVIA KDL-52XBR4 LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1189 seconds