Having problems with your Flat Panel Televisions ?

I wanted to play movies from my USB flash memory stick and plugged it on our DVD player (sharp ht-da641pa). i played around with the display resolution and put it in 1080. now we cant even use the dvd player cause on the screen, it always say NOT COMPATIBLE FOR DISPLAY or something like that. Im trying to correct it but the same message appears. please help. thanks.



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I wanted to play movies from my USB flash memory stick and plugged it on our DVD player (sharp ht-da641pa). i played around with the display resolution and put it in 1080. now we cant even use the dvd player cause on the screen, it always say NOT COMPATIBLE FOR DISPLAY or something like that. Im trying to correct it but the same message appears. please help. thanks.


... Flat Panel Televisions

Hi I read an answer about unlocking a DVD player HCT 501U to make it regional free. Something makes me think there is something more. The answered was to a guy who bought the dvd player in USA and tried to watch european dvd's. Conclusion was that this dvd player cannot be unlocked because it is locked at hardware level. However, i bought it in USA and I started using it with european dvd, and it is working well. Now that I tried to use it with US dvd's it says "wrong code". Is this compatible


The "Lock" is firmware not hardware and controlled by the software, (the flag number of the control line from the Disc) situated within the uProcessor in the DVD/CD Player.Trywww.dvdexploder.comfor a list of codes. ... Flat Panel Televisions

This is about an approximately 10-year-old Toshiba DVDVideo/Audio Player SD-4700. Has always worked well. Problem. I am watching TV series The Tudors from Showtime Network. Got the DVD's from the public library. All of the series's disks have played except the last disk in the final series. The DVD display window says "DISK ERROR" and there is no picture or sound. I have tried four different sets from the library and no one else has complained, but this "DISK ERROR" happens every time on this on


I think you must in this case give the benefit of doubt to the player. Since all the disk in this series is playing well then the particular disk can have fault or damage on the tracks that seems to send in the errror as the scan encounters the error ... Flat Panel Televisions

I PURCHASED A SANSUI MODEL HDLCDVD19S FLAT SCREEN TV (19") THAT HAS BUILT IN CD DVD PLAYER ON SIDE AND INCLUDES HOOK-UP TO USE AS A MONITOR FOR A COMPUTER. I WOULD LIKE TO KNOW WHERE I CAN DOWNLOAD DRIVERS TO USE FOR THE MONITOR, AS I HAVE WIN XP PRO BUT MY SCREEN RESOLUTION IS NO GOOD. I NEED SOME KIND OF COMPATIBLE DRIVER/S. WINDOWS CAME ON AND WAS CHANGING MY RESOLUTION SO IT WORKED FINE THEN WHEN I REBOOTED, I LOST THE RESOLUTION. ANY IDEAS THAT WOULD HELP ARE GREATLY APPRECIATED. THANKYOU


... Sansui Flat Panel Televisions

I borrowed a used TT 320 Progressive Scan Video Trutech DVD player from my neighbor today.I plugged it in &connected the color cables &everything.The DVD player turned on, but when I tried to play a DVD it wouldn't seem to play it &then after that I pressed the eject button to try to take the disc out,but the disc drive wouldnt open.I use an old I Insignia tv.It doesn't have cable I switch it to video on the tv to play DVDs.I basically need help getting my DVD player to work &play DVDs so Im abl


... TruTech Flat Panel Televisions

Sylvania LC220SS2 connected to dvd player says "no signal". Uses three jacks (red yellow white). Is there a bette way to connect them? Had used a switch that VCR and DVD player shared. It worked fine for a long time. Don't know what changed.


... Sylvania Lc220ss2 TV

While re-setting the Display function it was accidently set for PAL viewing instead of NTSC. The image is now rolling vertically on the NTSC TV screen. Now, I cannot re-set the display functions because I cannot view the steps while the screen is unreadable. The manual does not supply a step-by-step link. Unplugging the player does not help. Inserting a standard NTSC DVD does not help. The menu cannot be viewed in order to clear it. Help!


Hi hrosenelp,\015\012\015\012There's no other way to get it back to NTSC mode but to access the set-up. Your digital camera will help you see it clearly. While in the set-up mode, take a picture of the screen(TV) for every command that you will ... Flat Panel Televisions

My elta dvd player 8949 doesn't open anymore. There's a dvd in there, the displays both-- on the dvd player and on the tv-- say open, but nothing happens.


... Flat Panel Televisions

Sylvania hdmi I do not see an hdmi outlet on this tv, does this mean it is only compatible with old DVD players? Is there such a thing as a hdmi converter that will let me use and hdmi DVD player on this tv?


... Sylvania 6620LCT 20 in. EDTV-Ready LCD Television

I have a SONY Bravia HDTV. I have a panasonic SA-PT870 surround otput for sound. I have a SONY Blu Ray DVD Player. I have a SKY+HD box. Recently hen my TV was set to HDM2 it was receiving all my SKY services, with TV Audio sound. When I switch on the Panasonic surround sound it would say "Hello" then display INFINITY. We would get fantastic multichannel surround sound. Now when I turn on the surround sound it changes the TV to HDMI3 (player). There are no Images but sound from the DVD in


... Panasonic TH-50PX500 50 in. HDTV Plasma Television

My Samsung tv won't recognize the hdmi connections for my phone or DVD player. it used too but stopped first the DVD player and now my mobile phone. I can't check to see if it recognizes my lap top anymore as the laptop is being repaired at the mo . it's q Samsung tv. model UE40D5500. it's telling me check connected devices power, cable connection, and source selection. help its driving me nuts.


... Flat Panel Televisions

I have a gigamax dvd player. when i insert a USB into it it says "empty" though i have a video in it. how do i watch the video on the dvd player using the USB?


... Flat Panel Televisions

I bought a LC DVD 199A in November for a Christmas present. Until today, I have not tried to used the DVD player because I haven't really had a chance. I put the source mode to DVD but the DVD won't load, I did press lightly, the DVD went in only part way and I removed it. Why won't it load? Also, it goes from DVD mode to TV mode in a matter of seconds which is frustrating as well. What can I do. Of course it is out of warranty. Help? Patty


The DVD player has a problem with the loading mechanism. Probably something has dropped inside it such as a coin or something else. It is really a simple problem. The reason why it would switch back to TV is because it is getting stucked. Get a flash ... Curtis Flat Panel Televisions

Rca model j27435 trying to use dvd player says unusable signal


Most DVD players and maybe the Wi are connected via rear audio and video input jacks so that may be your issue. ... RCA F27442 27" TV

24 inch venturer lcd tv dvd. only use dvd player as no aerial. Been fine for two years but now says 'no signal'. Any ideas?


... Venturer PLV31220S1 22 in. LCD TV

- My yamaha DVD player (mini home theatre, about 7 yrs. used) now can play MP3 and VCD but can not play DVD, when I try, it shows "NO PLAY" - what is the cause, and what to fix it. may I have to change its head ?


Contact yamaha with this problem, they may have a firmwar upgrade you can get Have you tried any DVD's that you have from 5 to 7 years ago, if they used to play and don't now then the problem is with the unit and not the firmware. It may not be cos ... Yamaha Flat Panel Televisions

Please help - I feel like flushing my universal remote down the toilet! it has no brand name, markings or code written on it so how do I can I programme it to use on my philips dvd player (DVP2130) PLEASE HELP!


Here's the link to the Phillips website to obtain the code #:\015\012\015\012http://www.urc.philips.com/\015\012\015\012It is region-specific, as I suspe ... Olevia Flat Panel Televisions

I purchased a Sylvania SDVD7014 portable DVD player. I'm trying to figure out how to use the AV input/output. I plugged in all the correct cords, but can't figure out how to change the picture from the player to my TV. Can you help?


... Sylvania Flat Panel Televisions

My JVC HV-32D40 BK TV is not recognising any TV channel and if I select Menu and Setup to re-tune nothing displays at all on the screen. It was working fine and then I went to change channel and it stopped working. I cannot change to any channel or use the Guide. I can use the TV with my DVD player connected by SCART accessing digital channels and DVD.s. Any suggestion on how to reset the TV?


... JVC Flat Panel Televisions

While watching a dvd on the Q2035a I was using a seperate dvd player and I use a universal remote for both the dvd player and Q2035a. I began to adjust settings for the dvd player using the univ. remote. I noticed that I was in Tv mode instead of dvd mode and then the tv just went of all by itsself. The manual power button no longer works on the Q2035a. I unpluged the tv and pluged it back in and the tv automatically turned on to a black screen but you can hear it as being on and the green led


Hello, It sounds like when you pressed the remote you inadvertently changed the scan on the ctv. This can cause the ctv ( colour tv ) to change from say ntsc to pal or similar. Even a reset button wouldnt help as it sounds like it is within the setu ... Flat Panel Televisions

Locked out front control panel while in menu. Now I can't unlock front control panel and I don't have original remote control or owners Manual. Help me please. The front panel is all I use for DVD pla


Hi there, if you know what model it is you can do a google search for the owners manual. There should be a sequence of buttons you can push or hold to reset to factory/default settings. ... Projection Televisions

The input dvd screen says no signal and the DVD player doesn't seem to have any power.


If it is in warranty return it---parts for the DVD unit are not available--they would have to replace the entire DVD unit inside the set. ... RCA 32LA30RQD TV

I have a 19 inch toshiba tv 19A21 but no remote for it. I'm trying to hook up a dvd player to it to play through the tv. All the cables are set up correctly, but I can't find the input channel on the tv that will let me play it. I read the manual for this tv and it says you use the remote to access the input screen, but I do not have a remote. Is there a way to do it through the buttons on the tv? Pressing the volume buttons at the same time got me to a menu screen but I didn't see an optio


Most analog tv,u just reqiure pushing the tv manual button channel up a few times,tv will go into video modes like 1 or 2 for play video devices.If this doen't work,try website like Remotes.com to buy an original remote. ... Toshiba 19A21 19" TV

I am trying to install ROKU video streamer into my Sharp TV model 27KS300. Roku says to plug their red/yellow/white RCA cable into the video in ports on your TV. I do this but nothing happens. I am assuming these ports are the same ones I use to input the DVD player. ??


Yes these are the same yellow white and red ports that you would use to connect your DVD player. I believe this television has one port in the front and one in the back. I might be wrong but I believe video 1 is in the back and video 2 is in the fron ... Sharp 27K-S300 27" TV

Phillips 32 inch lcd model 32pfl3504d/f7 when i hook up my phillips dvp3982 dvd player with a hdmi cable, ports 1 and 3 do nothing. port 2 gives an screen message that says "format not supported" the composite video cables work fine, but the picture quality sucks. i have tried 2 different hdmi cables, so i do not think that is the issue. please, HELP ! ! !


... Philips 32PFL3504D 32 in. LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1889 seconds