Having problems with your Flat Panel Televisions ?

I have a mitsubishi dlp WD-65733 and it went out on me a week ago. when I power it up i get only the green light above the timer. when i hit the reset button in the front i hear a click in the back and the green timer light starts blinking for about 30 seconds the it powers off. I do not get any lights above the status or lamp. i have replaced the bulb before about 1 1/2 years ago. could this be the bulp again? when i replaced it before i had an orange lamp light but not this time.



Answers :

Hi,
It seems problem in power supply board that got few electrolytic capacitors leaky and causing problem. It does not look like lamp issue.
Let me know are you handy with electronics stuff repair and can replace parts in circuit board?
Thanks.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a mitsubishi dlp WD-65733 and it went out on me a week ago. when I power it up i get only the green light above the timer. when i hit the reset button in the front i hear a click in the back and the green timer light starts blinking for about 30 seconds the it powers off. I do not get any lights above the status or lamp. i have replaced the bulb before about 1 1/2 years ago. could this be the bulp again? when i replaced it before i had an orange lamp light but not this time.


Hi,It seems problem in power supply board that got few electrolytic capacitors leaky and causing problem. It does not look like lamp issue.Let me know are you handy with electronics stuff repair and can replace parts in circuit board? ... Flat Panel Televisions

I picked up a Mitsubishi Model No. WD- 62527. The guy said all it needed was the lamp replaced, I replaced it and the tv still doesn't turn on. Their is a green light that blinks were it says timer for about a minute then the orange light under lamp turns on. About a second later the green light under timer blinks three times then turns off and then the only light on is the lamp orange light. It will continue to do this hole scenario over and over again...HELP!


... Projection Televisions

Replaced lamp cartridge on Mitsubishi WD-65735 Television a week ago...worked fine...now when i turn on tv...picture flickers a bit ...then shuts itself off...and i get a steady red lamp light


... Mitsubishi WD-65735 Television

Samsung HLR5064W DLP TV, lamp timer light flashing, but there is a loud vibration noise like a fan blade hitting something at the back of the set. I replaced the lamp a couple of years ago, and I think it's still Ok, but what's with the vibration?


Sounds like a bad color wheel----remove lamp---the wheel faces it--look for missing pieces or the wheel shattered---these are known for the wheel making a loud high pitched sound or even a grinding sound if the wheel shatters.if wheel bad You ... Projection Televisions

I have a viewsonic pj551 and the lamp went out, i replaced it but i still get power and lamp red lights when it starts up. the lamp will not start. I've replaced it with two lamps so i don't think its the lamp. how do i get it to start up?


If the Lamp Fan is OK Then Problem will be in the Ballast Board ,It is what Powers Lamp on, and if the Lamp Fan Is Defective then Lamp will not Light Either,Fan has to Run in order to cool Lamp.\012Encompass Parts might have part 1-800-638-3328 ... Flat Panel Televisions

I have a sony kdf 50e-2000 the green light goes on then it goes to thr red blinking lamp light. I have no sound or picture. If I replace the lamp light will I get sound and a picture again?


Hi,Yes, if you have not replaced the lamp since you purchased this TV.Lamps usually last about 6000 hours.I've seen lamps last much longer than 6000Hrs, it all depends on the usage.Remove the lamp from the TV and do a visual inspectio ... Sony KDF-50E2000 50" HDTV

I have a samsung dlp model hls5086wx/xxa that recently stopped working. Lamp light came on so I assumed the lamp needed replaced. Replaced the lamp and still won't turn on and lamp light blinking. It also make a whining noise when turned on but I don't get a picture. Is it the color wheel or ballast? Any suggestions?


... Samsung Projection Televisions

The lamp has just been replaced and now the tv will only stay on for 30 minutes and then turn itself off. The lamp indicator light is red. We can turn the tv back on and the light goes off. Six months ago the optical engine and the lamp were replaced. That lamp only lasted six months and the picture went dark.


Did you press the System Reset button with a ball point pin on the front of the set? You might have a ballast going bad if it has never been replaced. But first, the reset button then you may have a thermal switch which is located just above the la ... Mitsubishi WD73727 73" HDTV

I have a samsung HLN5065W dlptv. My wife turned it on one night and no picture. we did get sound. i noticed when I turn the tv on, it shuts down and restarts to no avail. I see a blinking lamp light and after a few restart attempts, i get the three blinking lights. I have replaced a lamp supplied by samsung parts. still no picture. same three lights blinking. do you have any ideas?


The tv also have a board that call the Ballast board could be dead too.This Ballast board only job are to ignite the tv projection lamp. ... Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

Lamp timer how do you reset the lamp timer? I replaced a new lamp, and after 15 minutes I get a flickering picture. The EOM manufacturer box says to reset the lamp timer. Please help.


... Mitsubishi WD-60638 DLP TV

Replaced lamp light in Samsung HLT4675XS/XAA 1 year ago. TV is now turning off. The lamp light looks colorful but not bright. The standby light stays on after turning off the TV. Lamp light blinks twice and off.


I have a model close to yours & mine did the same thing. Its an easy fix the problem is its over heating. Unplug the tv take all the panels off the back of the tv and you will see lots of computer boards but look for one that has heat sinks and & ... Samsung DLP HL-P5663W 56" TV

Have Samsung HL-S466W- Replaced Lamp (OEM), Replaced Color Wheel, Replaced Ballast. Currently the fan turns on for a few seconds, all three lights blink: Timer,Lamp, Standby. No Video or on screen sound. Lamp doesn't power on, nor can I really hear if the color wheel is activating. What can I troublshoot next before investing more in this model? Already verified the wires are correctly in place and the back door panel is tightly secured to activate the power switch.


... Samsung HL-S4666W Television

Okay, so last night my Hitachi 55vs69a starting shutting itself off. I could turn it back on after a few minutes and within an hour or less it would shut off again. This morning it will not turn on at all. The lamp and temp light were flashing but now the lamp light is the only light showing. It's not flashing, it just stays on. I just changed this bulb 2 months ago so it is new. I was told to reset the lamp timer but now since the t.v. will not come on, I cannot do that. The bulb has not bl


If you bought a cheap non Hitachi lamp that could be bad and look fine.I would remove the lamp and look at it and reinstall it making sure it is in properly----what was wrong with the old lamp? Did it still work at all? ... Projection Televisions

I have a Sony tv KDF50WE655, the other day while I was watching tv, heard a noise and the tv went off, displying the lamp red light..I ordered and replaced the lamp. I made sure the lamp is ok and the door is secure...now, when I turn it on...the fans in the back run momentarily..the green light in front goes on...then the fans stop and get the standby red light flashing 3 times on and off..any help will be appreciated...thanks


Please make sure lamp cover is fixed properly in its position after lamp replacement as it has to press a safety switch located nearby lamp cover.3 times red blink problem is related with that lamp cover safety switch only.Hope this will ... Sony Grand WEGA KDF-50WE655 50" Rear Projection HDTV

I have a Samsung HL56A650C1F. We just recently replaced the lamp due to the error code that we received from the LED Lights on the front panel. New lamp lasted about 3 weeks and now we are getting the same code indicating that we have a problem with the lamp. My question is, Did we get a bad lamp or is there some other underlying problems that may be causing the lamps to burn out?


... Projection Televisions

I have a mistubishi WD-Y57. I replace lamp 7 month ago, and now my tv doesn't work. I have sound but no picture. I took off the plastic grill from the back of the tv to see what it was doing when I tried to power it on. I see the fan turn on and see the light trying to cut on. It flickers light. It try two times before shutting down. If I see light flicking, does that mean the lamp isn't the problem? I tried to read the code light by holding those two buttons in front of the tv. But am not sure


WOULD YOU LIKE TO SELL IT ..LET MY NO LEE ... Mitsubishi WD-Y57 57" Projection HDTV

Replaced lamp The picture went out on TV with a loud potting noise and the lamp light was flashing. I replaced the lamp and reset the lamp timer. I have a picture with no color and there is a humming sound coming from the TV. What could be the problem?


There is some short circuit at the main circuit board. Seek help of any experienced service technician. ... Samsung HL-P6163W 61" TV

I have a Hitachi Ultravision model 50VF820. It will turn on and the blue light starts blinking and after a few seconds the lamp and temp red lights start flashing in order (power, temp, lamp). I had the lamp replaced about a year and a half ago but not the cooling fan. How do I know if it needs just a fan or another lamp as well?


Fans fail rarely---two years is average life for a lamp--at least take lamp out to examine it to see it is not shattered inside. ... Projection Televisions

Replaced Bulb but light is still blinking. Do I need to replace the Lamp Timer or is it another problem?


... RCA HD44LPW62 44 in. HDTV TV

Have a mitsubishi 65 inch flat screen model 65735, I replaced the dlp chip because it went bad. I put it back together and now the screen stays dark blue with the timer light on green. I can still hear sound but my screen is so dark blue i can bearly tell its not a black screen. I rearranged the connectors and got different results, one time the lamp light was flashing orange, the other time when i turned the tv on it would turn right back off instantly with the lmap light orange and timer ligh


... Mitsubishi WD-65732 65" Projection HDTV

My panasonic pt-52lcx16 power starts and green light flashes and nothing happens it shuts off and the lamp light turns red for a minute the lamp light was replaced less than a year ago


... Panasonic PT-52LCX66 Projection Television

I replaced lamp on mitisubishi WD-60735. The Lamp light is still blinking yellow, the timer light lit up green, but lamp still blinking yellow


Are you sure you installed the lamp properly and put the door back so the interlock switch is functioning. Sometimes installing the lamp will get slightly displaced and is not plugged up properly and will indicate a lamp blinking light. ... Mitsubishi WD-60735 Projection Television

I have a Panasonic PT50LC13 flat screen LCD. It will turn on for about 10 minutes then shuts off. The power light flashes red and the lamp light slowly flashes red as well. The lamp was replaced about a year ago and just for kicks I did a reset on the lamp with no effect...any ideas? Thanks!


Hi,Replaced lamp was Panasonic original or some low price bulb that installed in old lamp casing/ housing?Let me know above info to diagnose problem.Thanks. ... Flat Panel Televisions

Samsung dlp tv with three flashing light on front, I have replaced the lamp but I am still getting the flashign lights with the new lamp


... Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

Lights flashing Just replaced the color wheel sugested by Fixya. TV comes on for a few seconds. Then the Lamp and standby/temp light keeps flashing.When I unplug it for a sec. It does the same thing. The bulb was replaced about 6 mos ago.....Please help......Thanks, Mark.


A suggestion: if replaced the wheel--there are two cables from it to nearby metal box---one is conventional but can be hard to plug in---the other is a ribbon cable----IT ONLY HAS CONTACTS ON ONE SIDE WHERE IT PLUGS IN AND CAN BE INSTALLED BACKWARDS ... Samsung HL-R6168W 61" HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1461 seconds