Suggested Questions/Answers :
It is recommended you read all this kind of situations
Hi, i have a problem with my jvc lcd tv model no. lt-42a85zu, when i connected it to an hdmi output on my computer the tv seemed like it reset itself all the channels were lost and the tv setup menus wont work. the pc hdmi connection works ok and aloso some scattered channels here and there. only the setup menus are inaccessible.
Flat Panel Televisions
Hello, I just bought the KDL55EX720 LCD TV a few days ago. I originally hooked a DVD player up to it with the standard AV cords & it worked great. Lastnight I purchased a Blue Ray player and hooked it up with an HDMI cable. When I go to input it shows the HDMI connection, but when I select that connection the screen goes dark as if the TV is off so that I cannot go through the setup process with the Blue Ray player. I reset to the factory settings, but having the same problem. I have also tried
Sony 55 KDL55EX720 3D LCD TV
I have a Hitachi 42PD7200 plasma tv. The hdmi port works with the new xbox 360, satellite tv and until recently my Samsung bluray player. When the bluray is connected (via a 4 port HDMI switcher of directly to the TV) it shows the bluray starting up with the Samsung logo and then gives the message invalid frequency. At this point the picture and normally sound are lost. I have connected the bluray to another TV using HDMI, the same cables and it works fine.
Has anyone come across this problem
Hitachi 42PD7200 42 in. HD-Ready Plasma Television
Hi, I have a Sharp IC-26sb14u TV about 2 years old. It has 2 HDMI ports, I have one connected into a TiVo box, and it works fine. The TiVo is connected into input 4. Here is the problem, I want to use the TV to view movies from my MAC powerbook. I have the MAC HDMI chord, purchased at a MAC store, and the Sharp TV will not recognize the signal. I have the TV on input 5, no video and no sound. I know that the problem is not my MAC, I just returned from MAC store and they connected my MacBook p
Sharp LC-26SB14U 26 in. LCD TV
I connected my laptop to my LG 50PQ1000, and then my Blu-ray player didn't work - no mater what I did, the problem was "invalid format". I tried everything, including putting it on another TV - there it worked just perfect, but on LG no. I changed the HDMI cables, I tried all possible resolutions, no way. I updated the player - the problem remained the same. Now in order to watch DVD and BRD I put back the old cables, not HDMI cable.
LG 42LC2D 42 in. LCD HDTV
Philips 37PFL5603D/10 tv, connected to Humax HDR-Fox T2 recorder.
We do not have the HD signal yet, but due in June this year.
Problem is with the HDMI connection, mostly does not work, sometimes green picture, no sound. Also does not switch automaticaly When box is switched on or off.
Will only switch properly when a scart lead is also connected.
You should not have to use a scart, when you have HDMI.
We need the HDMI to cope with the new digital signal when it comes.
Have switched Humax
Philips Flat Panel Televisions
My JVC HV-32D40 BK TV is not recognising any TV channel and if I select Menu and Setup to re-tune nothing displays at all on the screen. It was working fine and then I went to change channel and it stopped working. I cannot change to any channel or use the Guide. I can use the TV with my DVD player connected by SCART accessing digital channels and DVD.s. Any suggestion on how to reset the TV?
JVC Flat Panel Televisions
Issues with LG 26LE5300 26 in HDTV LCD TV
Both audio & video flicker off & on when connected to PC via an HDMI cable. No problem when in TV or AV (DVD) modes. PS. worked fine on Day 1, did not use HDMI on Day 2; problem arose morning of Day 3.
I've tried the other two HDMI ports to no avail. I've disconnected and reconnected HDMI at PC. I've rebooted both TV and PC.,
I tried this.. and it works perfect for the video.. but there is no audio.Is there any specific setting to be made in TV or my laptop?I have Dell laptop with Win7, because I dont see any option to enable audio.. ...
LG 26LE5300 26 in. LCD HDTV
I recently moved and had my jvc big screen tv hooked up to direct tv through a hdmi cable i get picture but no sound I had this problem before when i had it hooked up the first time the direct tv guy messed with th tv settings and got it to work but i dont know how he did it and now ive moved and am having the sound issue again how can i get the sound to work on hdmi it works on everyother input channel
JVC HD-52Z575 52" Rear Projection HDTV-Ready Television
I just bought a Mitsubishi WD-60738 everthing works on the tv with one problem my Sony BDV-E370 Sony 5.1 Blu-ray Disc System also new sometimes does not display a picture when i use my hdmi going to the tv. This is what i have been doing to get it to work i going into the tv and hard rest the thing and when it comes but up the hdmi works and then it goes out again causing me to rest and setup all over again. Can you tell me how to fix this with out resting or tell whats causing this.
The handshake between the two devices is being lost. Sometimes it takes going into the television's service menu for an industry initialization to remedy this problem. However the hard reset you have been completing is what is recommended first befor ...
Mitsubishi WD-60738 TV
I have a kde-50xs955 sony plasma tv and now hdmi port stopped working. tried with new hdmi cables but no luck. cut power to reboot still not working. tried different devices and wont show it is even connected to hdmi
HI:\015\012You need to replace the analog board assembly, this is the board that you plug connections into, seems the HDMI port has malfunctioned, there may also be a problem with the main board assembly that the analog board connects to. ...
Flat Panel Televisions
My lg 32ld310 flat tv works used to work on my ps3 and laptop when connected using an hdmi cable. Now it stopped working.
LG Flat Panel Televisions
Hdmi connection i have PS3 and try to connect with HDMI cable but it still want work. I tried another cable but i keep the problem. No picture no sound.
Sounds like your TV is not compatible to ps3..or you can try to adjust your resolution ...
Sharp AQUOS LC-32D44U 32 in. LCD TV
My Sanyo AVL 209 t.v. is only working on one channel. It shows the channel at the top but if I try to chage it stays on the same channel but goes fuzzy. This all started with a broken remote. I am now ttrying to do in by the t.v buttons. I think Source is the problem. I put t.v. as the source but think I have the wrong input. How do I change it. I am connected to a HD box and am totally confused. I have tried unplugging for an hour. No luck . Unable to change to another channel.
Sanyo AVL-209 LCD TV monitor power supply ac adapter cord charger
I'm trying to plug in my Playstation 3 into Toshiba 23HLV87 TV to use the blue ray function, but the screen just shows HDMI in the lower right hand corner.
I know my Playstaion HDMI works since I plugged it into another TV and had no problem. Is there any way to reset the connectivity? I'm unfortunately thinking the HDMI port is defective. :(
Toshiba 23HLV87 23 in. LCD Television
I have problem with HDMI on SONY KDL 26U2000.
I bought digital satelite complette with HDMI. I connected it to TV.
But video and audio signall is sometimes shortly breaking.
More times on HD programs.
My service engiener checked cables - all are OK.
He checked satelite signall - all are OK
He checked satelite complete with another HD TV (Philips, LG, Samsung...) in his company. HDMI on satelite complette worked correctly.
I would ask you about help.
Sony's can be picky about HDMI.Check for software update that addresses HDMI issues.Contact Sony for software. ! 800 SONY USA ...
Flat Panel Televisions
Hi, I have borrowed a friend's Maxim free to view tv, no manual. I can't work out how to set it up properly to watch the free to view channels. From the source menu, the 'AV1 (Scart)' option plays a channel called Pick TV. From the 'TV' option in the source menu I can scroll through BBC1, BBC2, ITV, channel 4 and Five. But each is a blank blue screen with 'no signal' in the corner. I don't know if it's a problem due to a missing cord, or i've connected the parts incorrectly, or it's the recepti
Flat Panel Televisions
Although my tv is connected correctly, we have somehow got it "off" the correct channel I think. We don't use this tv often but a few months ago it worked fine. We have done nothing to it that I know of BUT now it just produces "snow". I believe it is on the wrong channel but I don't know what the correct one is. HELP, it is now spring break, the grandkids are coming. I need help! What is the channel to have the tv on to receive DishTV? If that isn't the problem, what else could it be?
If you have a standard dish receiver with only a coaxial cable to the TV, then probably the TV should be on channel 3 or 4. ...
Emerson Standard (CRT) Televisions
My Lg Flatron was working good but suddenly i cannot see any picture on it nor any channel is getting tuned after changing to AV mode the DVD gets connected ,tried setting the cable channels by surfing but still the problems persist.There is no picture nor any sound on TV mode only a blue screen
LG Standard (CRT) Televisions
I have an Samsung PS42C451 Plasma 42" TV. I have had it for approximately 10 months. I turned it on today and I have no picture but I still have sound. This has never happened before. I can't even see anything, not even menus or volume or channel info. I have checked the aerial and all connections are connected properly. Nothing is working
I have a samsung plasma tv ps42c451 bought xmas time about two months ago it decided that it was not going to give me a guide anymore all it does is says no information for everything . ...
Samsung PS42P2S 42 in. Plasma Television
My hisense show no signal when I connect a blu-ray via hdmi but my xbox works fine. I bought a 1.4a hdmi cable but still the same problem
Flat Panel Televisions
I have an LG 37LE5500 TV. That's plugged into a DSTV Satellite HD PVR Decoder via HDMI. The TV is new. Before I had an old CRT TV and was using the AV (Red/White/Yellow) cables. The LG LED TV has been working fine, except that I've started to notice a "clicking" / "static" sound coming from the speakers now, when using the HDMI connection. When I mute the volume, the sound goes away, so it's definitely not an electrical problem as far as I can see.
Anyway, it only starts the "clicking" after
LG Flat Panel Televisions
LC32D44E An active antenna has been connected to the tv.
I can fetch informations for the channels, but it only show a blank screen with "No Video".
I know for a fact that it works, since I have another TV that works with the CI card and the antenna.
Tried the with and without supply voltage, same problem.
Sharp Aquos LC-32G4U 32 in. HD-Ready LCD Television
I have connected a Roku Digital Media Player to Sharp AQUOS TV, I am able to get the video but no audio from TV, Audio cable and all are setup properly. Can anyone suggest me? also i see the same problem when i connect a Laptop to TV using HDMI cable
Use the HDMI cable on the Roku. The reason you don't have audio from the laptop is because the HDMI out on the laptop has no audio on it. You need to use a 3.5 mm audio cable to connect the laptop audio to the TV. ...
Sharp Aquos LC-42D62U 42 in. LCD HDTV