Plz check your cable which is connect between your cable operater and your tv or set up box and tv. Try this and attach cable should be properly.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
My Dell 42 inch plasma tv has an issue with the picture blinking on and off when using the HDMI input. All of the analog inputs work fine.
Plz check your cable which is connect between your cable operater and your tv or set up box and tv. Try this and attach cable should be properly. ...
Flat Panel Televisions
I have a Sony Wega DLP with no sound through HDMI all of a sudden. Can't give exact model at the moment but it is a projection TV definitely 5years old at least. It has only 1 HDMI input and I've been using a splitter box to run my DirecTV and Xbox through the HDMI input. Worked great for years then recently there's no sound. Picture works fine and sound works through component inputs. Any ideas? Do I need to replace the HDMI input or something?
This RCA L26HD31 TV has always worked fine in other respects... but when I try to connect my pc's hdmi cable to it for use as a monitor, I just get "unusable signal". When this TV was made, hdmi outputs on laptops was not the norm - it was vga. Can this TV use an hdmi signal from a dell laptop? Yes, I'm using the correct input for the TV and have tried hdmi1 & 2 ports. - Thx
Make sure you have set the laptop's display properties to as low a resolution as possible (also make sure the screen refresh rate is 60 hertz) and turned it off before connecting it to the television. Turn the television on first and set to the corre ...
RCA L26HD31 26 in. LCD HDTV
My maxent plasma will not show picture thru hdmi, it says no support for hdmi 1 or hdmi 2, it used to work fine when hooking play station thru hdmi, now only sound works but no picture.
Maxent MX-50X1 50 in. Plasma Television
I have a Hitachi 42PD7200 plasma tv. The hdmi port works with the new xbox 360, satellite tv and until recently my Samsung bluray player. When the bluray is connected (via a 4 port HDMI switcher of directly to the TV) it shows the bluray starting up with the Samsung logo and then gives the message invalid frequency. At this point the picture and normally sound are lost. I have connected the bluray to another TV using HDMI, the same cables and it works fine.
Has anyone come across this problem
Hitachi 42PD7200 42 in. HD-Ready Plasma Television
Hi, I have a Sharp IC-26sb14u TV about 2 years old. It has 2 HDMI ports, I have one connected into a TiVo box, and it works fine. The TiVo is connected into input 4. Here is the problem, I want to use the TV to view movies from my MAC powerbook. I have the MAC HDMI chord, purchased at a MAC store, and the Sharp TV will not recognize the signal. I have the TV on input 5, no video and no sound. I know that the problem is not my MAC, I just returned from MAC store and they connected my MacBook p
Sharp LC-26SB14U 26 in. LCD TV
Sylvania LC260SC8 LCD TV has no picture. It displays white & black vertical lines on the middle to left had side of the TV. Audio still works fine. I swapped out HDMI cables, tried using the component inputs, hooked the co-ax to the TV instead of the cable box, tried 2 different video inputs all with the same issue - no picture, only audio works. Is there something that can be done to fix the TV? I love this TV. It's only 3 years old. Thanks for the help.
Sylvania LC320SS8 32 in. LCD Television
None of my component inputs are working i have hdmi hooked in for cable, a computer hooked in to the computer jack, and they all work fine. i tried my xbox 360 in every available input with the component cables and get no picture or sound i have used multiple sets of cables
Did you switch the Xbox HD switch to the off position? ...
Sharp LC-C4654U 46 in. LCD TV
Panasonic Viera 1080P Plasma TC-P50S2 - Error Message: DIAGNOSTIC, HDCP Authorization Failure HDMI Port Disabled - All HDMI ports not functioning, tried different HDMI cables with no luck. Set works fine using jacks from cable box to set.
Panasonic TCP50S2 50 in. TV
Possibly did something in settings, as tv wont pick up signal on any input. it stared with my hdmi input....one day my sons ps3 no longer would work on tv. I figured hdmi input went out after I tried changing every setting in the input mode. Cable and wii still worked fine. one night I went to turn his tv off and hit wrong button. from that night on tv wont pick up signal on any input. No cable at all. Actually have cable coax, not hdmi for cable
Haier HLH32ATBB 32 in. LCD HDTV
Will not accept HDMI signal. Works fine with analog signal
on input #5
Hi,If you are connecting Bluray player with this tv, make sure Bluray video output is 1080i or lower resolution, this tv wont show 1080p video signal.Does tv show any error message when you connect video source in HDMI input? If yes, what ...
Hitachi 55HDS69 55 in. Plasma Television
I have an NEC NLT-40HDB2 with some odd issues, the input (changing to hdmi/ avi) and channel up buttons don't work even when using a logitech universal remote, the buttons on the side of the set d
NEC Flat Panel Televisions
I have lost all my HDMI inputs for my Hitachi L42X01AU, i had my PS3 hooked up and it worked but now when i hook it up none of the HDMI inputs work
Try unplugged all units involved---HDMI does not like being hooked or unhooked with units powered and or on.Wait a while and make the connections and then power set, box, whatever is inline back---the units will try to reboot and that may cur ...
Hitachi Flat Panel Televisions
Onkyo HDMI + 42 " LG TV = black screen but both work fine with other inputs/ outputs
If using a box disconnect it and the set from power for a few minutes and try again.Next I would remove connections one at a time with set off and try to see if one is creating this issue. HDMI does not like to be connected when a unit is on ...
Flat Panel Televisions
My television is two and a half years old, and therefore outside of the warranty period. All of my HDMI inputs have stopped working, but the other video and audio inputs work fine. I have tried disconnecting the power supply and restarting, but they still do not work. Any advice on what could be wrong and how to fix it? I'm not afraid to work on the unit myself, but would also be interested to find out how much it might cost to fix.
\012Try using a new HDMI cable, unless you have verified that your current HDMI cable works on another television.\012If this does not fix your problem, I would recommend taking the television to a TV Repair ...
Panasonic TH-42PX75U 42 in. Plasma HDTV
My Sharp Aquos LCD TV 40E77U is working on the analog input but won't detect HDMI inputs?
This set MAY require or have available a software upgrade for this issue.Contact Sharp to see if they have it or if this is an issue in their database that is common. ...
Sharp Aquos LC-42D62U 42 in. LCD HDTV
The HDMI components on my Panasonic Cinema vision do not work. All I get is the sound. The standard input components work just fine tho. How can I get the HDMI components to work properly?
Panasonic Projection Televisions
My Panasonic TX-32LXD80 is showing a picture with a scart input but none of the HDMI inputs are working. I've checked the Inputs with a different TV and they work fine.
Is there a solution to this please?
Panasonic VIERA TX-32LXD80 32 in. HD-Ready LCD TV
My LCD Insignia moniter says no signal after I use the VGA input. It was working just fine earlier before I went somewhere but now it is not working no one else uses my computer and I don't know what to do I don't have the user mannual and I have a desktop pc.
Insignia Flat Panel Televisions
Have a mitsubishi wd 73638 tv last night all 3 of the HDMI inputs stopped working the RCA and COAX still work fine but anything connected to the HDMI just show a blue screen
Mitsubishi WD-73638 DLP TV
Hi, my Phillips was hooked up and working fine directly to the DISH receiver using the HDMI 1. I moved and had to put the DISH receiver in another room and ran a coax cable to where the TV is now using the ANT in spot. I select TV as the source and choose channel 60 and no signal. I hooked up another TV and it works OK. Any ideas?
Hey, I'm Seth. I work as a sub contractor for dish network. I am picking up that your problems are on TV 2? If so, you will need to go into the menu on the TV itself and look for, "channel scan" or "auto memory". Run a scan. If there are no channe ...
Philips 42PFL5332D 42 in. LCD Television
I have an LG 37LE5500 TV. That's plugged into a DSTV Satellite HD PVR Decoder via HDMI. The TV is new. Before I had an old CRT TV and was using the AV (Red/White/Yellow) cables. The LG LED TV has been working fine, except that I've started to notice a "clicking" / "static" sound coming from the speakers now, when using the HDMI connection. When I mute the volume, the sound goes away, so it's definitely not an electrical problem as far as I can see.
Anyway, it only starts the "clicking" after
LG Flat Panel Televisions