Having problems with your Flat Panel Televisions ?

There is a fuse on the power supply board it says to only replace with ame fuse i understand that do i have to soder it out and in or is it more easily replaced.



Answers :

Hi there, if in case on your TV that the fuse is needed to solder out before it can be removed, yes you need to solder it out. But if it has this fuse terminals that you only need to tap it out better if thats the case. Some TV has this fuse terminal for easy access in replacing the fuse. if still needed to solder the fuse I suggest that do a little rewiring and put a fuse holder if available, if just solder the new fuse as is the same as the old one. hope this help, please rate and vote. good day

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

There is a fuse on the power supply board it says to only replace with ame fuse i understand that do i have to soder it out and in or is it more easily replaced.


Hi there, if in case on your TV that the fuse is needed to solder out before it can be removed, yes you need to solder it out. But if it has this fuse terminals that you only need to tap it out better if thats the case. Some TV has this fuse terminal ... Flat Panel Televisions

Phillip 50PF9630A/37. I have a red blinking 7 times after a green light. i've allready replaced the 2 bulging cap on the bottom of power supply board and also a cap on the Y board (board on the left) although i sodered it backwards with negative on the wrong side, i imediately resodered it and it sitll doesnt work. i've even isolated and unplug the y board and x board independently to see if it will still give me a blinking red lights and it still does. i've checked every capacitors and fuse on


Hello sir Jose!!!!try to unplug the y sustain only and power ON your TV..and see what happen next..Please reply to this tread for immediate help.. ... Philips Flat Panel Televisions

I have a Syntax Olevia 20HVK, we had a brown out and the tv went out. I opened the tv and found a blown fuse in the power supply, I replaced the fuse and the fuse blew again. should i just replace the power supply? what should i do?


You have shorted power transistor or mosfet on power supply that need to be replace however this need a soldering skills and electronic background if you don't have skills its better if you replace the whole power supply board. ... Flat Panel Televisions

I am not sure what fuse to put in it, when I got it it had a 500 MA Ceramic 5x 20 250v Fuse blown; but when I replace it with the same it automatically pops. The board of the power supply has written on it that at F1 should be a 8.0 AH/250V Fuse. What fuse is it supposed to have, so I can replace it? Thank you Corey


On the body of the fuse or on the circuit board there will be a suffix T or F next to the value.T stands for Time delay or slowblow. If its marked F it means fast acting fuse.Now after replacing the correct fuse if it still pops you have ... Flat Panel Televisions

My tv model sony trinitron KV2192M3 suddenly turned off and remained with a hissing sound.I then replaced FBT and the problem seems to be solved but after one month same problem occured, this time it was not FBT but i noticed protection fuse N25 from B+ and fusable resistor near fly back which is connected to 200v supply to G1 control grid is blown off. After replacing these fuses FBT tuned on but there was excessive brightness on the tv screen with sound ok and after little while tv turned off


Hello, First appreciate your work that you done yet, Secondly, According to the symptom please check the given two solutions:1- Check At FBT ABL resistance value .47ohm find and replace it.2- At C Board mounted on the ... Flat Panel Televisions

Fixya tv I have a Samsung LCD TV. Model Number LN40B530P7FXZA. In January this year my TV picture went out and only had sound. I replace the power supply board and all was well. Well the same thing happen again but this time one of the fuses on the board has blown. I replaced the fuse and as soon as I plugged in the power cord it blew. I did this twice. Should I get another board or is it something else? Thanks.


It sounds that there should be a dead short circuit in the power supply board's circuit. If you are not familiar with\012electronics, do not attempt to repair. \012Whether you suffer fatal electric\012shock. Instead, conta ... Samsung Flat Panel Televisions

Hi I have a power problem, with my Sony RDR-HX717 DVD Recorder. I have no power at all in the display or anywhere else in my recorder. I suspect it could be the fuse, on the power supply board, which is a Newton Power NPS-51AP. The fuse is a T4AH-250V. My question is - what is the best way to replace this fuse, as it is in a closed fuse socket, which is not easy to open? Thx for any help. Fritz Diedrichsen


... Flat Panel Televisions

Protron PLTV-3250 Stopped working. Replaced fuse no results. Is it worth replacing the power supply?


HelloThe oscillator section of the power supply is not working. It will be very difficult repair these kind of power supply boards. Replacement as card basis only could be done. ... Protron PLTV-32 Television

I'm trying to fix my Viewsonic N4825P. I have narrowed it down to the power supply since every time I replace the fuse and plug in the tv, the fuse blows. The fuses I am using are 5A 125V. Do I need t


I would suggest trying what is called a slow burn fuse of the same size, if there is something wrong with the power suppy then the fuse will continue to blow I would not recomend a higher amp fuse as this may cause other things to fry in unit. ... Flat Panel Televisions

I have a Samsung PS50Q97HD plasma TV that keeps blowing new boards and I don't know why. It came to me with a faulty YSUS that had damaged the VS supply section in the PSU board. I fixed the PSU and fuse and have good VS voltage now. I replaced the YSUS main. I powerd the TV and the upper YDRIVE (Yscan buffer) board chips when pop. I put this down to it getting damaged unseen when the YSUS went faulty. I replaced the YDRIVE upper with new and then the lower board went faulty too (holes blew in t


... Samsung Flat Panel Televisions

Power will not tour on Samsung T220HD model. I replaced a bulging capacitor on the power supply board and still will not turn on. I also tested the fuse with an ohmmeter and the fuse was good. any ideas what to try next?


... Samsung T220HD 22 in. LCD TV

I have a sharp lc-19dv27ut tv that is 110 volt. My daughter plugged it into a 220 plug (with the adapter on the end of the power supply cord) but without the voltage converter. She said nothing happened but now the tv will not turn on. No red or greed LED light on the TV. Is the fuse blown or is it TV spent? If it is just a fuse, where can they be purchased and how do I replace them. Thanks for the help.


Sometimes replacing the fuse alone fix the problem,you can buy it at your local electronics supply,it is cheaper than the next parts i'm going to explain.However if you replaced the fuse and nothing happen then you might have an open fusible resistor ... Sharp LC19DV27UT 18.5 in. LCD TV/DVD Combo

I have had a Viewsonic N2752W since December 2009 that shutdown after 11 hours of operation and fails to restart. The power supply has no fuses blown and the capacitors in the AC/DC power supply that were bulging have been replaced. There are no changes in status and the television has no signs of any power when the power button is pressed. What are your thoughts?


... Flat Panel Televisions

Re:Power supply circuit in a Toshiba 32AF45 - cannot power up. Have replaced:fuse, Capacitor 250v1uf, Q502, R541, and D523. Blows fuse immediately when turned on and I don't know what to check next. Thanks for any assistance!


... Toshiba 32AF45 32" TV

Hitachi TV model C21-rm25s-192 power supply transistor and fuse blow off just after replacement. other components of the power supply seem to be ok. what should I do?


The SMPS - power supply is critical of the generated frequency , load trip and high voltage. So if the power transistor has blown then you must check the reason for the failure before the new one is put into the circuit. Check the DC vol ... Flat Panel Televisions

My baird x47dtv has blown a fuse and everytime i replace this fuse it blows again, do i have a problem with the power supply??


... Samsung Flat Panel Televisions

Toshiba TV Model 32C11OU. No power. Outlet is good. Replaced Fuse on Power Supply Board but to no avail. What next?


... Toshiba 32C110U 32 in. LCD TV

Tv shut down replaced burnt fuse but burns again when plug into power supply. what should I do my mom is in her seventies and missing her programs...


I would replace the fuse again and try a different outlet to rule out an electrical problem with that particular outlet. if it blows the fuse in a different outlet it's probably time to retire that TV set it's hard to find anyone to work on them anym ... GE 25GT240 25" TV

Hi still have a problem with my phillips flatscreen tv it cut out and i replaced the fuses on the supply board it no works but picture is dark and kinda time lagged is it on its way out or can I do anything else?


Try changing the input device to something you are sure, works such as a DVD player. Look for any loose contacts in RC jacks/sockets/Cable. ... Philips Flat Panel Televisions

Sharp lcd tv 42 inches, got wet by water, open inside: cleaned power supply, check fuse ok and replaced diode and triac. still not work, any helping idea from expert would be appriciated Thanks- Tom Atlanta


How much water entered the set? and was it just the power supply board that was affected? I will make the assumption that it was the case. In the majority of cases that involves water damage the only way to correct this, is change the power supply bo ... LG 42LC2D 42 in. LCD HDTV

Have a 42PC3D-UD plasma tv. Fuse was blown on board that is above power supply, replaced it and it did not blow again but turn on power and it shuts right back off. what to do?


Go to nearest help centre and check your tv ... LG 42PC3D 42 in. Plasma Television

Panasonic tc-p50s2,had lightning strike near house and tv stopped working,no lights,no power,all fuses that i see test good, i replaced power supply and main power board and still same thing?


... Panasonic TCP50S2 50 in. TV

My samsung LN37C550 led TV has no pwer & a burt smell. I took off the back & looked at the power supply board. The fuse is blown and the is a smoll component with the number CR 814 next to it on the board. Any idea what that is and can I replace it myself?


If you have the components part number, you can certainly order a new component. However, I suggest you approach this repair with caution, as some of the parts you may have to replace can be very small. I would only attempt replacing the part if you ... Samsung Flat Panel Televisions

Blows 0.8A small fuse (right next 2 power supply Input from mains power) every time it's replaced. It stopped powering up one day & ever since, hav'nt been able 2 power up d unit.


Hi,Let me know model number and brand info of tv to find out possible cause of fuse blow and to suggest a solution.Thanks. ... Flat Panel Televisions

I have Hitachi 65f710 projection tv, that has no power, I found a thermal fuse open in the power supply, I replaced that; the Tv came on but has no hi voltage, the tv has b+ but not at HOT hight voltage transistor. what else you think can be done. Right now I have no picture Thanks


Try replacing the H-out transistor, if yours is convergence IC type, replace it. hope this help, please rate and vote. ... Hitachi 57F500 57" Rear Projection HDTV-Ready Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0823 seconds