Having problems with your Flat Panel Televisions ?

Hi, I have a Sony RDR-HDC300 high def digital recorder. When I select a program from the Guide and hit the Red Record button, the program begins to record & then stops after a few minutes (anywhere between 2 & 10mins). It does this regardless of whether I'm watching another channel or if the TV is off. It is plugged in, has enough space (43 hours free) & no power cut was applied to the appliance. This is very frustrating.

Answers :

I have the same problem. I think disabling the auto power off in settings may fix it .

Really annoying though.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Hi, I have a Sony RDR-HDC300 high def digital recorder. When I select a program from the Guide and hit the Red Record button, the program begins to record & then stops after a few minutes (anywhere between 2 & 10mins). It does this regardless of whether I'm watching another channel or if the TV is off. It is plugged in, has enough space (43 hours free) & no power cut was applied to the appliance. This is very frustrating.

I have the same problem. I think disabling the auto power off in settings may fix it .Really annoying though. ... Flat Panel Televisions

I was watching something which I had recorded on my SKY+ box. It came to the adverts and I fast forwarded. When I stopped the rewind to play again, the picture became all jumpy. I tried to fast forward and back but still the picture jumped. I tried to play another recording but the same thing happened. I then went back to the "live" TV programs and selected BBC1, but again the picture jumped. It iis also as if there are 2 different frames ( one top of screen and one at bottom) and out of synch w

... Sony FD Trinitron KD-36XS955 36" TV

Okay, well I have a JVC AV 32120 and it will run DVDs and all fine. That's great and all but when we plug the cable into the back and go to watch tv, we won't get anything coming through, just a blue screen. I've tried going into the menu and adding the channels individually, then the auto programing mode as well, I've gone as far as resetting all the v chip codes and still nothing! I'm desperate, please anyone?!

I would check and make sure you are connected properly in the back of the unit. Sometimes people put them in a little back ward and while they will allow you to watch a show they will not let the tv pass threw. the other would be making sure to selec ... JVC Standard (CRT) Televisions

I have a thomson dti 6300-16 set top recorder box. i live in derby and have experienced the digital switch over. my tv after rescanning is perfectly fine, with no loss of service or channels. however my set top box has failed for the last 48hrs. i have rebboted several times and completed auto scans. everything works and i can watch all the channels through my set top box on my tv, my pre recorded programmes are still successfully there and working. but no information on the channels appear now

... Thomson Flat Panel Televisions

Insignia NS-LCD22-09 lost its channels. It keeps telling me to run auto program, but finds no channels. I've run the autoprogram 3 times. I also unplugged the TV and moved it to a different location, attached it to a different antenna which I knew was working with another TV. The auto program still found no channels. Would I be correct in thinking I need to take it in for repair or replacement?

... Insignia NS-LCD22-09 LCD HDTV

We own a Panasonic Blu-ray Disc Recorder Model no. DMR-BW880. On Monday we had some bad weather which interferred with our boradcast. Since then we have had intermittant problems with the picture. When checking the signal it says it is in the red to yellow strength. If we plug the anttena directly into the TV there is a clear picture. If we watch a pre recorded programme then go back to watch live tv a still picture from a previously recordered programme shows with some interferrence at the top

... Panasonic Flat Panel Televisions

BAUHN I purchased the above TV at Aldi,s Liverpool store in Sydney 10/04/2013. When I set up TV the Guide (EPG) was working fine. For some reason the Guide (EPG) has now stopped showing any programs and says No Event Information and the same message when display is selected on the remote for the program you are watching. The signal strength for all channels is showing 4 to 6 bars and the picture is fine, I have tried Auto Scan again and tuned in all Channels again but this made no difference. W

... Flat Panel Televisions

The TV works however I cannot get the set to read the channels. I have cable but no cable box. Have tried to program it for over 3 hours. I've tried it using ch.3 and ch.4. through the remote. After I scan the channels, it tells me none were read. My other TV's work, so it's not the cable company. I even plugged the plug for about 30 minutes.

Check you cable or air settings. I would try cable setting first then scan channels, if that doesn't work I would try air and scan.I am not sure cable setup.\015\012also check tv input settings. the lcd's have an input selection button. it will ... Flat Panel Televisions

My DVD is not record on NTSC system broadcast,my tv is analog. just record Brazilian broadcast channel 693 TV Globo International. I want if you can give me a code to this solution to record my TVshows,movies and sports and another thing if you can upgrade for region code free to record and play on system South America Pal. Thank you Wellington Nicolau

Hello,I don't think the recording as anything to do with region or any code. As long as the DVD plays discs.I hope you are aware that there are different types of empty discs, we have DVD-R, DVD RW +, DVD \015\012RW -, e ... Flat Panel Televisions

Hi, I would to know if the thomson JL8006 twin hd recorder allows you to record a channel whilst watching a pre recordered one at the same time

... Flat Panel Televisions

I have an Insignia NS-LCD42HD-09 42 inch flat screen tv. The HDMI input works, but the component cable says no signal, and I only get cable on two channels. All other channels say no signal. The two channels I get have both picture and sound, and it is not my cable company because I plugged in another tv to the same cable, and everything works fine. I've had this TV for almost three years.

... Insignia NS-LCD42HD-09 42 in. HD-Ready LCD TV

I have a sagem freesat + recorder. Whilst watching a recorded program a message box popped up saying the box had encountered a problem and recommended reformating the hard drive. I did this and now it won't record at all. How do I fix this?

That sounds like the hard drive has failed.Replace the hard drive and try to format again. ... Sagem Flat Panel Televisions

My Sony KDL-52WL140 does not respond to any controls, not the remote, and not even the buttons on the tv itself. The only way you can turn it off is to unplug it, then, hours later, when you plug it back in, it is still stuck in the on position. It is tuned to a channel that gets only snow and static, and that's all we get. It was working fine, then started flipping in and out of various menus on it's own, as we watched, them tuned itself to the static channel and nothing will unstick it. The

Hello,The problem should be from the front panel control board. The board is defective or has disconnected from the inside. To\015\012 actually find out what's wrong, you need to disassemble the TV. But \015\012before th ... Sony BRAVIA KDL-52W4100 52 in. LCD HDTV

Moved tv to another room, it was connected to a cable box. Now it is just connect to regular cable but the remote do not work. How can I program it to get more channels (it only get 2 channels since I moved it) without the remote.

... SNK Magnavox 42MF438B/27 42 in. LCD TV

I was given a tv with no remote. I have cable and a dvd player. I can not watch movies on my tv because I no remote. I have not been able to find a code so u can program my tv to my cable remote so I.can change the channel and be able to watch dvd's. Can u help me? My tv looks a lot Luke this one, its gray speakers on the side with a place to connect dvd cable chords to it and the serial number is F321CF0N2.

No INPUT or VIDEO manual buttons on the tv bazel frame to push to get into VIDEO 1 or 2 input to used.U must buy the tv original remote to used.Because if u want to tries to find the wright program ables codes to make this tv to work by the tv cable ... RCA TruFlat 27F520T 27" TV

I have a Digistar flat screen TV mod # LC32U5D Was a demo in Walmart - came with no manual - Have a vhs/dvd combo unit hooked up to it with a 3wire set up - can watch TV no prob - can watch dvd or vhs no prob - just can't record a program from tv - limited Knowledge on these things - so talk to me like I'm a **** - thanks

You have to send the video and audio from the tv set to the inputs on the VCR recorder (it should be labeled "IN" there will be one yellow, one white (or black) and one red connector. without these cables hooked up, your recorder has nothing to recor ... Flat Panel Televisions

I bought an Element TV Model ELDFT421 less than 6 months ago. All of a sudden, while watching TV today, the TV just cut off. I've tried unplugging and plugging the TV again and again, but the TV won't cut on. I've even put plugged the TV into another socket, but still nothing. Please help.

... Flat Panel Televisions

There is no signal on my samsung t220hd although i bought an indoor antenna? in the beginning when i plugged in the antenna i was able to find couple of channels, but after I watched dvd through my laptop a sign No Signal appeared and I cant find those channels.

... Samsung T220HD 22 in. LCD TV

We were watching a recorded show, via a COX HDTV cable box, on our Mitsubishi WD 62628. When we went back to regular TV, we had no sound. I get sound watching a movie on a DVD player. But nothing from Cable TV or DVR'd programs.

... Mitsubishi WD62628 62" Projection HDTV

Cannot perform movie recording basing on the programmed schedule. Schedule is altered, forwarded to another year, whenever "preparing to record" appears on the screen of the TV.

Sounds like some confusion, what is signal source and provider for that. ... Flat Panel Televisions

My one year old LCD TV was accidentally hit on the screen with a heating blanket controller while my wife was fluffing the covers, from that point on the TV went right to standby with the red light and will only flash green for a second whether I turn it on manually or with the remote. I was told by another Fixya employee that it was the capacitors on the power supply board which frustrates me a bit because I will have to take it to a repair shop regardless now and pay the same amount even with

Hello; If you hit the screen with something , you probably cracked it. The set will likely not power up with a cracked screen, This has nothing to do with bad capacitors. John ... Emerson LC320EM8 32 in. LCD TV

I am trying to hook-up a PS2 to the DWT1304. I have the video (yellow) and audio (white/red) plugged into the front. I have tried to access the game system on channel 2, 3 and 4 with nothing but fuzz/static on the screen. The PS2 has been hooked up to this TV previously and worked. I have tested the PS2 connection on another TV and it works fine. I just don't know what else to try with the DWT1304 TV

Have you tried the AV Channel ... Durabrand DWT1304 13" TV

How to set the screen to watch widescreen program like bbc news and other channel that provide widescreen view?

Go into your user menu to picture preferences and put it on 16:9. Or simply just hit aspect button on your remote until you get to it. ... LG 37LC7D 37 in. LCD HDTV

Can I Record one programme whilst watching another

If you have two tuners or two sources of signal then one can be watched as the other source is recorded. ... Flat Panel Televisions

I have a new Memorex LCD MLT 1921. I don't have the manual. I don't know how to program the TV and/or the remote to get the channels I need to watch. How do you do it? Thank you very much! I will really appreciate the help!

You can download and print your TV manual, at no cost, here:http://www.managemylife.com/mmh/owner_manuals/15560/MEMOREX-LCD-Television-L0910312 ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0954 seconds