Having problems with your Flat Panel Televisions ?

I have akai CT 2579 model TV. After 5 or 6 minutes my TV automatically goes into standby mode. After 4 or 5 seconds, when i press power button from remote control or press main power switch from the main board, it starts working and again after 4 or 5 minutes, it goes again into standby mode.



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have akai CT 2579 model TV. After 5 or 6 minutes my TV automatically goes into standby mode. After 4 or 5 seconds, when i press power button from remote control or press main power switch from the main board, it starts working and again after 4 or 5 minutes, it goes again into standby mode.


... Flat Panel Televisions

I have a Magnavox 20MF251W/37 that when I plug it in it turns on to the standby mode (red power light). When I power it on with remote or by pressing power button it does turn on (blue power light). Shortly thereafter, I do see an image (snow at this point since I don't have it plugged to any video source). However, that image stays on the screen for only 1 second then disappears. The unit is staying on and is NOT going back into standby mode (power lights stays blue). I have replaced main


Hi tempcheck,\015\012\015\012Lot of brand have a common symptom when there's a malfunction in inverter board, it will automatically shuts down the unit. This is because there is a protection circuit designed connected from this board to the mai ... Philips Flat Panel Televisions

Issue with Samsung LE32B450. After the TV has been on for about 5 minutes, when you change channel the screen goes blank and the sound goes off. However, the TV is still on as pressing the power but


Just do a hard reset to this set and check. Unplug the TV from AC mains wall socket, and re-plug it back after 10 minutes or so. This must make it a hard reset. ... Samsung LE32B450 32 in. LCD TV

I have an AOC LCD tv when I hit the power button the light turns blue and then right back to orange, at first it would eventually come on after pressing the power button several dozen times and work fine until it was turned off, now it just goes from orange to blue and back to orange or the light goes out completely. I saw a video that said when it does that it could be the power supply or the main av board, what do you think?


Hi there , sound like it may need output caps replaced in the power supply . ... AOC L26W861 26 in. LCD TV

I HAVE AN LG 42 PJ 350 R TV ... I HAVE MY PC CONNECTED WITH IT. YESTERDAY I BOUGHT NEW GRAPHIC CARD WITH HDMI PORT. I CONNECTED THE PC AND TV WITH HDMI ... IT DISPLAY WAS FINE THAN SUDDENLY AFTER FEW MINUTES THE TV GOT OFF BY ITSELF. THERE WASN'T EVEN STANDBY POWER. I UNPLUGED THE MAIN POWER AND TURNED IT ON AGAIN .... THE TV WENT IN DEMO MODE WITH A PURPLE BACKGROUND IN THE PICTURE... I TURNED IT BACK TO HOME USER MODE BUT ITS GIVING BACKGROUND SOUND IN TV MODE BUT THE PICTURE IS PURPLE... I A


I think from your mobile virus had entered in tv reset the tv ... LG Flat Panel Televisions

I have an 52lg52 tv and the tv only goes off on the power cord, it dosent goes off, if i press the remote control or on the tv. i have to take the power cord off the outlet.


Did you ever get the problem fixed? If yes, how did it get fixed? I have the same issue ... LG Flat Panel Televisions

What's your problem?I have Samsung CS-29Z57MQ (29in CRT Slim TV) and due to curverd corners I tried to set using service menu (info - menu - mute - power). While setting I accidently pressed INFO button again and it auto changed some G2-Adjustment values. I switched off the TV. From after that TV is not turning on, its on standby mode and when I press power button or service menu button I only can hear the click but again no picture comes and it goes to standby again.


... Samsung Standard (CRT) Televisions

Sony KDL46EX710 Goes into power save mode almost every 45min Sleep Timer is not activated. The Screen switches off the standby light does not flash just stays green if u press the HDMI channel on the remote the tv comes back on with the message power save mode : Off


... Sony KDL46EX710 46 in. 3D LCD TV

I have LG LCD TV Model No: 22LF12R. The problem is the TV fell face down when it was still powered ON. Now when you switch it on the power LED comes on but there is nothing on the screen. When you press the remote control the LED responds or it blinks and when you power off on the remote it goes off and when you power on it comes on. The problem now is there is no display on the screen. There is no voltage in the display unit. Which components shoul I change. Hope u reply soon.


In my experience, there will be damage to the main pcboard, usually under the transformer.If you are lucky you can find all of the broken track and remake the track.Good luck. ... LG Flat Panel Televisions

The controls on the TV and from the remote will not work if they are not used for 20 - 30 minutes. It is not simply a remote issue because the controls on the front TV panel will also not respond. So, we have to turn the TV off and back on again to be able to use it. However, after you press the power button on the remote or on the TV to turn the TV off it takes about 20 seconds for the TV to finally respond and turn off. This issue is not limited to a single source. It occurs when we are wat


I have seen this before--loss of control is usually a microprocessor in the set "confused" and the first thing to do is unplug the set from power for a while and also if used any box providing signalIf that does not help it is a serious issue ... Toshiba 47TL515U 47 3D LCD TV

Hello my easy touch 42" tv has no picture when turned on the only thing that comes up on the screen is easy touch and the screen just goes blank the tv has the red light on when i plugged the tv in to the mains and when i pressed the power button the blue light comes on and the the easy touch logo comes up on the screen and it it just goes blank the tv itself is a lone tv as my lg smart tv is being repaired i just wanted to know if the tv had to warm up before there is any picture


... Flat Panel Televisions

Toshiba 32Av615d when cold tv works ok for an hour or so then goes into channel search mode and channel numbers are counting. press av input for a different input and works ok for a minute os so and then back to searching mode.


... Standard (CRT) Televisions

Polaroid FLM-2634B model number 2700 had a ppwer problem. It blew fuses. I replaced the main power board and it was working fine, until it was on for about 20 minutes than the video goes blank, but the sound is still on as well as the power indecator (still blue). Is there any othe thing I can do to fix this?


... Polaroid Flat Panel Televisions

Philips 15 PF4121 /05 when the power is switcted on at the mains socket, the tv will not come on when the power button is pressed. The green light on the front of the tv flashes for about 5 /10 minutes, then the tv comes on by its self. everything works ok after this, but when the tv is unplugged from the socket, the same problem appears.


... Philips 15PF4121 15 in. LCD Television

I have a SANYO DP46848, 46 inch flat screen hdtv purchased about 2 - 3 years ago. The screen goes dark on the left side (top .25% is ok). It sometimes fixes itself after an hour or so. Sometimes you can fix it by placing your hand on the dark spot for 10-15 seconds. There is a thin horizontal line about 1/4th of the way down from the top with the top of line ok when the bottom of line area goes dark. LCD Controller? or Main Board? or Power Supply or the Panel itself? I have a picture if that


Ray I have just about the same issue . But my only problem is the thin black lines. Do you think cleaning the flex cables coming off the Tcon will help at all? This is the same model DP46848 ... Flat Panel Televisions

I have a Hitachi 42PD3200 Plasma TV that refuses to turn on this morning. It was shut down last night by timer and this morning will not come out of standby mode. The red standby indicator remains illuminated when the remote control power button is pressed and the TV does not respond. I have tried changing the remotes batteries as well as cycling the power to the TV in case it needed resetting. Any ideas on where to look would be appreciated thank you!


... Hitachi 42PD3000 42 in. Plasma Television

Mine stays in standby mode. When I press the power button it goes green for a half second and goes back with a loud clck from the Speakers. Please tell me its just soldering work.


Hi Brian,\015\012\015\012Bad solder joints will affect the performance of the power supply and may cause a subsequent shutdown but that's is only one of the factors. I've suspected that you have a leaky capacitor in that section or a faul ... Pioneer PRO-200 60" Rear Projection Television

I've had my LG 42pg20 for about 3 years and it recently is having trouble turning on. it will make the clicking noise as it starts up then immediatly make a 2nd click and the power button goes back to red. it sometimes takes several minutes of repeating this process of pressing the power button to get the TV to come on. what is causing this to happen


There is a power supply fault, it will have to go to be serviced.\015\012\015\012\015\012\015\012---\015\012\015\012Please dont forget to vote if you liked my answer\015\012\015\012thanks ... LG 42PG20 42 in. Plasma HDTV

When trying to turn it on the green light comes on the front, we hear a small zap sound, sounds like it is trying to come on and then the green light goes out... it will do this consecutively three times with one press of the power button. Then you have to wait 2-3 minutes before it will respond to the button press. We have done this for up to a half hour until the tv finally comes on. What is wrong?


Hello,This type of fault can be repair, it could be a short circuit on the panel power board, remove the back cover of the television in this you have to resolder the panel where you can find dry soldering, but if otherwise a common probl ... GE D52GW12 52" Rear Projection HDTV-Ready Television

It's essentially stopped working! When you power it up you get either 'welcome' ..... and that goes out after a minute or so, or you get 'load' and that just keeps flashing. None of the other lights come on. If you switch it off for 30 minutes and then turn it back on - no change! No response if you press 'TV' on the remote. Suggestions? Richard Yates


Hi Richard,\015\012\015\012This symptom indicated of missing output voltage(s) in the power supply board. The processor can't power up the entire unit because of this fault. If you have necessary tools and test instrument and knowledgeabl ... Flat Panel Televisions

Turn power on, power light blinks 3 times and goes back to "standby" mode. tried unplugging for 1 minute to reset, plugged back in and same result. called support line but can not find reciept for purchase date so can not get warranty repair.


Many tvs are having problems with the capaicitors on the power supply. I would remove the back of the set, locate the power supply, and look at the top of the capacitors "barrels", if the top is bulging up slightly, they are bad. Usually 6 of them ... Flat Panel Televisions

I have a JVC TV AV-21DTG2 the TV goes on protection mode as soon as I switch on the mains power


The power supply regulator section circuit has to be troubleshooted. There might be some shorted component/s. It is a skilled work. You must have sound knoledge in electronics to do this work. ... JVC AV-32D305 32" TV

What's your problem?Toshiba 40E220U has sound, no picture. stand by mode maybe? How is this reset? Worked fine, screen went black after 10 minutes. Blinks light on screen, at power up. Can see bac


... Toshiba 40E220U 40" Class LCD TV

I replaced the main board in my sony Kdl-32S300. When turn on power, the back light flashes 3 times then goes into standby mode after which the standby light flashes 12 times in sequence. What could be the possibles causes.


\012 B+ over voltage protection (OVP), unit goes to the standby mode then\012displays the 3 blink fault. This is also a problem in the power\012supply circuit, check T603 and R672. \012\012Have you set the output voltage correctly? ... Sony KDL-32S3000 32 in. LCD Television

I have a silvania Model No. LD370SC8 S and after 20 minuta the screen goes white i can see the blurry imagen but the screen stay white until i turn off the tv and let it cold down,the audio is fine and imagen work good for 20 minutes after get white screen,i replace the lcd controller board and the main tuner board and the problem still exist...any help...thanks in advance


Hello\015\012Have you checked the voltage at the video board when it goes white? Goes white screen means, only backlight is there, and no video at all. Check this. If loss of voltage or less than normal voltage it should be there, power swit ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1473 seconds