Having problems with your Flat Panel Televisions ?

I have a insignia ns-lcd37 that has sound but no picture so i assumed a bad t-con board i replaced the t-con board with a new same problem left tv on for hours in a darkened room i saw no backlight i checked all my voltages at the power supply every terminal checked out good what could it be



Answers :

Its 100% sure that the source of the problem is the backlight inverter board. The fact that there is no backlight confirms this. You will need to replace the backlight inverter board to resolve this problem. If you can get me the part number off the same I can find you a replacement

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a insignia ns-lcd37 that has sound but no picture so i assumed a bad t-con board i replaced the t-con board with a new same problem left tv on for hours in a darkened room i saw no backlight i checked all my voltages at the power supply every terminal checked out good what could it be


Its 100% sure that the source of the problem is the backlight inverter board. The fact that there is no backlight confirms this. You will need to replace the backlight inverter board to resolve this problem. If you can get me the part number off the ... Flat Panel Televisions

I got a Sony Bravia KDL-40WL135. Blank screen. There's two LED lights: red standby and green power light. When I turn on the TV, green led comes on, then after about 30 seconds red led blinks once, then green resumes. The green led stays solid. I think that's a SONY error code, I tried to look it up but can't find anything useful. I have replaced the power supply, AU board, backlight inverter, logical board, and the second power supply board. Any suggestions? I haven't checked the t-con bo


Http://www.smpcshop.com/KDL-40WL135-KDL-46WL135-p-8895.html\015\012\015\012\015\012\015\012Above is a link for a service manual.\015\012 ... Flat Panel Televisions

Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,


Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ... Vizio VT470M 47 in. TV

I have a TH50PX60U with the red light flashing 10 times. I went through the diagnostic flow chart to where it said replace the PA and DG boards. I replaced both and still have the 10 flashing lights. SInce that flow chart didn't seem to work I started checking the feeds from the power supply. I noticed on the PA10 that as soon as I plugged in the AC, the voltage read 15V. Then the voltage started dropping fast and went down to zero. Is this normal or should the voltage remain at a cons


... Panasonic TH-50PX60U 50 in. Plasma HDTV

Have an Element LCD model number flx-3210 that loses raster after 1 minute. Audio is fine. No blink codes and all caps are fine. Checked ESR and replaced common failing caps already. ec17 and ec18 450v 10uf. Also changed d10 and FETs q17 and q16. Nothing changed. When I lose raster, the LED D13 on the power board lights solid. I do NOT have any backlights on. Dark room tested and backlights go out completely when this happens. I also tested the two transformers on the inverter side of the pow


Hi Jeramy.These TVs are indeed re-branded Polaroid. You will not find the service manual under Element. You must find the equivalent Polaroid TV.The Polaroid Flx-3202 is the same as element flx 3202 and 3212 the FLM-3237 is ... Flat Panel Televisions

Sharp LC-26SB24U Im getting a white screen. I tried testing main fuse and F404 fuse they are good. I'm getting 12v at the fuse both sides, how do I check power to the T-Con board and is there anything in between I should check.


Check all capacitors on the circuit board. ... Sharp LC26SB24U 26 in. LCD TV/DVD Combo

Sanyo dp42647 dead checked power board and show no voltages,fuse is good can;t find any bad part


... Sanyo 42 in. LCD TV

I have 26LG30 LG tv Takes a while finally powers up backlight is on but no picture or sound I opened the tv All the capacitors seems good i checked all the diodes they all seem good Next i checked a


... LG 26LG30 26 in. LCD TV

I have a sharp lc-42SB45UT flat screen that after a thunderstorm will not turn on any more. Now I am pretty tech savy, and here's what I've done. Checked cable and receptacle and both are good. Taken off back cover and checked fuse, also good. The voltages on the power card seem correct by my multimeter so power is being applied, but the power on led is not lit. Any suggestions?


You are on the right track--follow the voltages--set has a standby power supply--right at or part of main supply---runs 7/24 so likely was damaged.likely you will find a open somewhere between where power AC enters set and the bridge rectifie ... Sharp Flat Panel Televisions

My plasma samsung ppm63mf7: no power, all caps OK, ceramic fuses OK, I replace a failed sustainer board. Now power just clicks and blinking power lightrnSo I unpluged T-con board and Main board to check for shorts but problem persist.power board# bn96 03736a* does any body have experiance with this model Tvs


I had a similar problem with mine, i had to change couple of caps but it still would not power on. I ordered one online and it seemed to solve the problem. the power supply board for the TV are a bit expensive but this guys over at had one for under ... Samsung PPM63M7F 63 in. Plasma TV

I have a lg 47 lcd tv. model num. 47LD500. only about a year old when this happened. Was working fine and just shut off by it self. will not do anything at all. no sounds lights nothing. Have checked power cord and all ovious things. Remover back cover and checked fuse and all capacitors look ok. Is there any downloadable test spect. and instructions for the power board. I have a good meeter and pretty good knollage of electronics. any help would be great. Thanks


Check power supply ... LG Flat Panel Televisions

I have a vizio vp422 that made a loud pop and now doesn't have any picture or sound. When you power it on the vizio display light turns from amber to white but that's it. U have to unplug it to turn it off. I have checked the fuses and they are good. The capacitors look good visually. There are a couple on the power supply board that have a black cover over the top, so I don't know about those. I changed the main board and made no difference. Someone please help!


Replace its power supply regulator board as card basis. ... Vizio Standard (CRT) Televisions

I have hitachi t.v. model p50s601 when i turn it on the picture appeares about 1 second imeddietly turns off when it turns off no audio and no picture. already changed the capacitors on the power board c553-c552 = to 3300uf to 100 volts. checked xbus/xsus apperantly no problem. on the power board there is a voltage of vs=88.3v appeares in seconds then imediatly goes to 0. my question is what else can i check? or what could be the problem? thank you for your assistence.


The main rail voltage is not building up and so there is a possibility of a high drain on the output sections. The +B voltage seems to come up and then flatter off as there is a negative feedback to the processor to cut off ... Flat Panel Televisions

Doesn't power up. Relay clicks several times, several seconds apart. After third click, power LED blinks three times. The OPC LED blinks once when the power LED blinks the first time. LED blinking pattern repeats every couple of seconds. Opened up TV to check capacitors. All look good. Purchased service manual, but there weren't troubleshooting steps for the power board. Any suggestions as to which board should be replaced first?


First of all you should weight the cost benefit of repairing the set versus purchasing a new one.\015\012\015\012Depending on the size and model of tv, it may be more prudent to simply cut your losses and buy a new tv rather than spend mo ... Sharp Flat Panel Televisions

Samsung s5053, will not turn on. clicking noise inside, screen comes on and goes off. No picture. checked voltage on pin 10 get 5 volts connector cn804-1. research on internet seems to point at main power board, but some think its standby power board. I was going to replace the PSPF501A01A board. But don't want to spend $100.00 on wrong board. Any advice will be helpful. Thank-You Ken


Ken, did you ever find out what was wrong with your set and have it repaired?I have the same "clicking" problem when first turn on the TV. First, it took about 30 secs clicking (came from the relay) then came on ok. The wait time gradua ... Samsung HP-S5053 Television

M228WDP-BZ - Pure white screen. Power supply board checked. Voltages through connector to main circuit board OK. Changed main circuit board without any improvement. Need to know the voltges that should be found at the connectors from the power supply board to the screen?


... LG 42LC7D-UB Television

I have Sony bravia kdl46ex500 I have replaced the main board, backlight board and the power board. I only get a click when plugged in or push the power button. All the parts had been purchased from ebay so I'm not sure how good the part are. At I don't want to purchase for shop jimmy.com till I know for sure.


... Flat Panel Televisions

I have a Rca 26LA33RQ upon initial use screen backlights bright white slowly fadeing to black. I do not know that the speakers work because I have not connect cable to it. I feel as if this could be the T-Con board. Or a low voltage production on my inverter board. I can find almost no information on this unit I repair al types of electronics being Navy trained leads me to try and find a publication to use but for this unit there is none. I am not even sure where the t con is on this one. There


... Flat Panel Televisions

This unit is practically brand new, has no dust nor dings nor damage on the unit anywhere, not even a scratch, but I haven't been able to get the unit to power on. Power cord is connected. The switch on the unit sounds like the others when pressed and everything looks and smells good inside and out! There are no cracks on the circuit boards, no broken wiring no broken or missing or out of place connectors. The fuse is also intact and appears good, but I haven't used a meter yet to check for


Hi jesseley,\015\012\015\012Do it has a led light when you plug the unit to the outlet, make sure that the outlet is live, what happen when you pressed the power on switch in the front panel?\015\012\015\012Jdvillanueva ... Flat Panel Televisions

I have a Vizio VW32LHDTV10A that produces sound but no picture. I have checked the main power board for 24v to both backlight inverters and 24v is present. I then hooked up both backlight inverters and turned the TV on and the blue LED on the Slave inverter comes on, but goes off after only a few seconds. What further tests could I perform to check which part is defective or what component is the most likely cause?


When you reconnect the inverter boards, when the LED goes off on the inverter board, do you still see 24vdc? You shuld also ty hooking up test lamps to the 24vdc to see if it will stay on.\012Right now I have a feeling the problems are in the b ... Flat Panel Televisions

I have a WS-65611 that I have replaced the caps on the DM board. Before I did that, the power LED flashed non stop, Now it does the normal 70 seconds but when I attempt to turn it on, it shuts right back off. After attempting a power up I checked the error code I got a short protect error. I then removed the DM again and verified the caps were not shorted to the shield and checked the pico fuse and found everything to be good. Any ideas of where I should start looking??


Did you run the error code operational check? In not unplug the set and plug it back in. Press and hold the DEVICE and MENU buttons for 5 seconds and release. The LED should flash a certain number of times a short pause and another series of blinks. ... Mitsubishi WS-65611 65" Rear Projection Television

Black screen and have sound vx42lhdtv10a(vizio 42 2008)power supply is ok(12v,24v,5v) main board have 4v and all fuses is good . my question is? how can i test my inverter board output voltage?how can


... Vizio Flat Panel Televisions

I have a Panasonic plasma tv tc-p42u2 tht won't power on at all I replace the power supply board with a new one and still not powering at all no lights.. Ac voltage going in is good ... Tv went out after a storm an wont power up at all plz someone help don't what to do ..


... Flat Panel Televisions

I have a Sharp LS-26SB24U that has a white screen when turned on. I tested main fuse and F404 fuse both were good. I tested power going from F404 to ground and it was 13v on both sides. I guess my next step is to see if the T-con board is getting power but I'm not sure how. I tried following a white line that said power and along is was a hole and I went from there to ground but got nothing. Any help would be greatly appreciated.


... Sharp LC26SB24U 26 in. LCD TV/DVD Combo

Sansui SV-3715LCD, I switch off the unit at the wall socket, when I plugged it in the next day there was no power, not even the LED indicator light on the front of the LCD activates. I checked the plug power and it has AC supply voltage right up onto the internal Switch-mode power supply board. Any suggestions


Continue to check--every set has a standby power supply that powers the remote circuit to turn set on and it runs 7/24 if set is plugged in.Never a good idea to turn set of by taking the AC away--it can cause micro problems(micro processor). ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1411 seconds