The main board the the 42A is no longer available. We have two of them here we're saving for parts and both need the main board. This is a common problem where the power regulator on the main board blows and something else on the same line shorts (actually I think multiple components short). There may also be one or two vented capacitors in the same circuit. There is nothing that can be done to repair the board and it's no longer available. Unless you can find a working board on eBay or some other place I'm afraid you're out of luck.
If you can't find the exact part for your Daytek TV
in a local store
or repair center
, I recommend to contact the manufacturer
directly. If system is still in warranty
they will set up a free service and repair for your unit. Please click the link below for the complete contact information of Daytek
. Daytek Contact Info
Hope it helps.
Thank you for using FixYa.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
Hello all !
My 42 inch Daytek TV is broken. I tried everything to fix it but.... no success.
I know which PCB is defective but i cannot find a replacement part for it. Daytek doesn't sell parts anymore (actually i think the company shut down) but there must be somebody who knows where to get these parts.
PLEASE HELP !!
the TV model is : DM-42A
and the PCB i am looking for is; PLYM02:
Thank you !
The main board the the 42A is no longer available. We have two of them here we're saving for parts and both need the main board. This is a common problem where the power regulator on the main board blows and something else on the same line shorts (ac ...
Flat Panel Televisions
Do you guys know a good Toshiba TV tech or company that can come out and look at my TV?
My TV keeps just keeps shutting off for no reason.
This is typical with many sets when it goes old as there is a high possibility that the components over a period of heating and cooling , tend to bring on a problem of dry soldering. So my advice is to check the set for some loose joints tha ...
Toshiba TZ50V51 50" Rear Projection Television
Two days ago-My Samsung HLT 5075sx started to make cracking noises then it shut off. I just replaced the lamp 4 months ago so i don't think that is the problem. Yesterday- i tried unplugging it and plugged it back in. It worked and appears the lamp will flicker, then the crackling noise, then the tv will click off and the three lights will blink continuously. Does anyone know what could be wrong??
Hi allenax,\015\012\015\012I think cracking noise come from the color wheel, read this solution too: \015\012http://www.fixya.com/sup ...
Samsung HL-S5087W DLP TV
After being on for a few hours, my TV shuts down. I have called my cable company and they said it is a short in the TV. I have unplugged the TV with the cable line and plugged it back in. It comes back on and is operational for a while, then the problem comes back. I think it's the cable line running from the TV to the box. HELP!!!
You might want to check the sleep timer. Go into the menu and make sure that this is not the problem first. \012\012Let me know if i can help you further.\012\012Kaufman605 ...
Samsung T220HD 22 in. LCD TV
got this tv not working.
found no power when conected and decided to remove back cover.
found blown PCB fuse and replaced it,turn the tv on and the picture came on for 10 seconds and when out but tv was still on since the logic board led was on,also noticed led on PCB started blinking.
pull power cord off and then plug back in turn power button on and got picture for 10 second PCB relay clicked picture died and led on PCB started blinking again.
what do you think?bad PCB or ba
Hello\015\012The power regulator PCB has some fault it it. It does not outs proper regulated voltages needed to the other PCBs in your TV. Normally Plasma TV power regulator PCBs are very difficult to repair, and PCB as whole should be replac ...
Philips 50PFP5332D 50 in. Plasma Television
I really dont know the size i think it is a 52 in the problem is the picture has like little squares and lines dont know what happened
JVC HD-56FB97 HDTV
I am thinking it might be the Volume + button is stuck, but I can't seems to press just fine. I know it isn't the remote either because the batteries are not even in it at this point. I unplugged it and left it like that for a while thinking it might reset something but still nothing. If it is in fact the physical button how can I go about fixing it?
If its the button the front keyboard will need replacement. You can check the tact switch on that board. If the switch is working then the main board would be suspect. ...
Seiki SC323FI 32"lcd hdtv,720p,60hz,3-hdmi,1-usb,pc,1-component,1-comp
Have a lg tv, mod #21fj4rb,came in for repairs.found HOT shorted out,replaced it & HV started to come out at top of FBT ,replaced it & then tv starts up for about four seconds &then shuts down.cheeks where made & found that the screen resistor&diode were blown,also found a transistor&30 volt zener diode& ABL diode defective,replace all components & still tv shuts down, i'm at my wits as to know what is the problem?can anyone help?thanking you in advance! vic
Standard (CRT) Televisions
When TV switched on momentarilly turnson then shuts off. This repeated over and over. Must disconnct power. to shut off. No picture or sound.
Good day!!!!That problem is usually cause of faulty capacitors on the power supply board..Just follow this instruction to fix your TV..1. Open the back cover of your TV.2. Look at the power supply board..Its normally c ...
Samsung LN46A650 46 in. LCD HDTV
I have a Pioneer Plasma with a separate media receiver. I just changed cable companies. In setting up with their "box", my receiver when trying to turn on just flashes red/green. Can't get it to work. The tv shows a picture (3/4 screen) and somewhat is somewhat "stretched", but NO VOLUME! Can anyone help? The new cable company says there is nothing they can do. They think my tv is incompatible with their "box"
Hi,\015\012\015\012Please let me know what cord are you using to connect the cable box to your TV?\015\012\015\012Jdvillanueva ...
Pioneer PDP-4350HD 43 in. Plasma Television
White Screen When plugged in yellow standby light turns on but when the power button is pressed the light does not turn blue it just shuts off completely. If repeated the TV will eventually power on BUT goes straight to a White Screen and remains there. Don't know what would cause this so in turn I don't know what to do to fix it. Any ideas?
Look for loose contacts in power outlet, input RC cables or such other devices, connect a different input device and see. Switch off TV manually, switch off power outlet, remove plug and cool it off for 48 hours. If problem persists, it might need ...
Polaroid Flat Panel Televisions
I have a mitsubishi WS 65711, we were watching a dvd and the tv shut itself off and wont turn back on now. When u press the power put it acts like it will turn on then a second or 2 later will shut itself right back off. The green light doesnt blink or anything. We tried unplugging it for a while then plugging it back in. We also tried resetting it but that didnt work either. Can u give us any possibilities as to what to check for, like a fuse. Or what u think it could be. Thanks for the help.
Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current pass ...
Flat Panel Televisions
Universal remote i want to know if i can use a universal remote for my sanyo Ht30744. i want to go the tv menu & ect.. I contacted the company and they said i should order the original remote. As you know its hard times right now and im not going to pay almost 50 for a remote. Please help thanks.
Visit the site named 'Electro-help' for\012more details. Click this link. View it in Timeslide or Flipcard\012option, which can be se ...
Sanyo HT30744 TV
When having the back panel removed You can see the three Bulbs. When I turn on the TV the red and green flicker then shut off but the blue stays on for several seconds and then it to shuts off Then I get a code of seven blanks on standby what could this be pleas help not my tv And I think I'm in trouble.
If you wish to get more details, surf the following\012link. There are over two thousand and\012four hundred posts. All are related to\012television and other domestic electronic equipment service help. You can get a solution there. Type in the\01 ...
Although my tv is connected correctly, we have somehow got it "off" the correct channel I think. We don't use this tv often but a few months ago it worked fine. We have done nothing to it that I know of BUT now it just produces "snow". I believe it is on the wrong channel but I don't know what the correct one is. HELP, it is now spring break, the grandkids are coming. I need help! What is the channel to have the tv on to receive DishTV? If that isn't the problem, what else could it be?
If you have a standard dish receiver with only a coaxial cable to the TV, then probably the TV should be on channel 3 or 4. ...
Emerson Standard (CRT) Televisions
I have searched all over internet and I think you are the only one who may exactly know whats the problem.
I have a Toshiba Regza 37" which has no picture but sounds works perfect.
The thing is if you really focus the picture is there but its too dull and dark to see it properly.
Ive heard something about switching T-Con board.. please let me know which one of the boards is that(any sign or specific connection?)
and where can I buy one?
Thank you very much and best regards
If you can see an image and it's OK - no distortions or corruption - then it's not an image problem, it's a backlighting problem. This means that the faulty part is not the T-con or any other board that works on the image, it's the inverter - the bo ...
Flat Panel Televisions
Hello, i have the sony flat panel display, model fwd-50px2, and as somebody says, when i plug it, red power light come on, i push it to turn on and the green light come on, makes a click and sounds like doing something but no image on the screen, it stays black, i think could be a board, because the fans don't work either, so, i writting you to ask which board i need to get, or what do you think the problem is, i really appreciate your help. Thankyou so much.
Sony FWD50PX2/S 50 in. Plasma Television
I have a mitsubishi model ws65809 big screen tv. When I turn power on it only stays on for 10 seconds then shuts off. I checked the fuse but fuse was fine.I want to know if I changed the lamp will it fix my problem but I don't know what the lamp looks like.
You will need to press the menu button and the input buttons on the TV both in together for five secoinds then count the two digit blink code from the power indicator. the blink sequence will repeat several times. let me know the sequence of the blin ...
Mitsubishi WS-65809 65" Rear Projection Television
My TV has been having a shacky picture when it first turns on for a few minutes, then clears up. the other day after using the TV for most of the day, it shut off unexpectidly, and now it will turn on and shut off after about 5 seconds, then must be unplugged to turn on again, then again only will stay on for a few seconds. what could cause this, and is it worth trying to get fixed?
1. YOUR flyback is going bad 2. Peform a removal and replacement 3. check your error codes first to ensue nothing else exists 4. Proceed to change out the required parts 5. Observe all electrical risks 6. Order replacements from jimmyparts.com ...
Panasonic PT-47WX49 47" Rear Projection Television
I have a Panasonic 720p Plasma HDTV model TH-42PX80U and shuts off while watching it or playing games. Red light Blinks don't know how to find out what it means. Can you help me. Con
Panasonic VIERA TH-42PX60U 42 in. Plasma HDTV
The tv usually turns on but now it won't. When it does turn on it makes a noise like a motor boat sound. The noise stays on until you shut the tv off. I'm not sure what it is I think it's the fan but
I would say that if there is a fan inside of it and it sounds like a fan bearing going bad then that is what it is. The reason for it not to be turning on anymore could be because whatever that fan is cooling has failed. Not sure. ...
Standard (CRT) Televisions
DLP BULB BLEW RLPACED BULB KNOW WHEN TV COMES ON PICTURE TURNS GREEN & BLACK THEN WILL SHUT OFF?
Possible new bulb bad or a issue with the optical light engine. ...
Mitsubishi WD-65638 65" DLP HDTV
There is a black rectangle approximately 3" wide around the picture. I don't think it is the caption button I looked at that. I'm pretty sure it isn't the picture tube going out. Looks like something that has been selected, but I don't know what to unselect.
Shut off CC. ...
JVC AV-32S575 32" TV