Having problems with your Flat Panel Televisions ?

OK, following your advice of March 9th I got a new lamp from Mitsubishi and replaced it tonigh in my Mitsubishi rear projection model WD-62725 TV. The old lamp was clearly broken. However I have installed the new one, replaced the front cover, etc., etc. and when I plug in the TV I hear a faint whirring sound on the far right (as I face the front), sounds like a cooling fan probably, but when I press Power either on my remote control or press the Power button on front of the TV, nothing happ



Answers :

Hi,
\015\012That sound may from the color wheel. Open the angine, open block front of lamp.
\015\012
\015\012mas_baz_22.jpg\015\012
\015\012open cover of color wheel and grap it.
\015\012
\015\012mas_baz_23.jpg\015\012Rotate color wheel manualy , listen it. If hear fristing sound, means color wheel is bad. Replace it too.
\015\012mas_baz_24.jpg\015\012Good luck.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

OK, following your advice of March 9th I got a new lamp from Mitsubishi and replaced it tonigh in my Mitsubishi rear projection model WD-62725 TV. The old lamp was clearly broken. However I have installed the new one, replaced the front cover, etc., etc. and when I plug in the TV I hear a faint whirring sound on the far right (as I face the front), sounds like a cooling fan probably, but when I press Power either on my remote control or press the Power button on front of the TV, nothing happ


Hi,\015\012That sound may from the color wheel. Open the angine, open block front of lamp. \015\012\015\012\015\012\015\012open co ... Flat Panel Televisions

I have a mitsubishi dlp WD-65733 and it went out on me a week ago. when I power it up i get only the green light above the timer. when i hit the reset button in the front i hear a click in the back and the green timer light starts blinking for about 30 seconds the it powers off. I do not get any lights above the status or lamp. i have replaced the bulb before about 1 1/2 years ago. could this be the bulp again? when i replaced it before i had an orange lamp light but not this time.


Hi,It seems problem in power supply board that got few electrolytic capacitors leaky and causing problem. It does not look like lamp issue.Let me know are you handy with electronics stuff repair and can replace parts in circuit board? ... Flat Panel Televisions

Our Mitsubishi wd-65833 tv turns on and makes a whistling sound like it is powering up-then the red lamp light comes on and it makes the whistling sound in reverse (kind of like the sound of a bomb dropping)and then turns itself off. Does is need a new lamp or is there something else wrong? We get sound but no picture.


This mechanical whining sound is typical of what is know as a color wheel fault. Color wheels are mechanical color disk that spins. generally if they do not reach a certain speed the set will shut down. It is a moving part and anthing that moves wil ... Projection Televisions

No picture on Mitsubishi VS 50703. New to me TV. When we hook it up, we get sound, but just a blue screen. If I press the menu button, the sound and picture come up in the upper right hand corner. Any ideas how to fix this?


Maybe it is in picture-in-picture mode ... Mitsubishi Projection Televisions

Mitsubishi WD-73735 will not turn on and there are no lights on front. The power supply was replaced, and is brand new. I fix HDTVs, and have had very little problem resolving other issues with other TVs. This one is strange. Need help, please. When I plug it in, you can hear the PS get power, but nothing turns on. Tried the 'Menu' and 'Input' combination....nothing. Tried plugging it in, with the 'Menu' button pushed...nothing. I can hit the 'Reset' button on the


If you have no lights come on the front of TV, you definitely have a power supply issue. Don't know what previous servicer did, but I would be looking at ALL wires & connectors. ... Mitsubishi WD-73735 Television

Problem with mitsubishi wd65737. thought the bulb was bad, bought a new bulb replaced it and now the screen doesnt want to come on. light on the front of the tv turns green, you have sound but no picture then the tv turns off the light on the front is now steady red. resetting the sytem worked yesterday but not today.


Lets try an error code operational checl. Unplug the tv and plug it back in. With the standby LED on press and hold the MENU and DEVICE/INPUT buttons for 5 seconds. The LED will flash a certain number of times pause for a while and blink again. Count ... Mitsubishi WD-73827 73" HDTV DLP TV

I have a mistubishi WD-Y57. I replace lamp 7 month ago, and now my tv doesn't work. I have sound but no picture. I took off the plastic grill from the back of the tv to see what it was doing when I tried to power it on. I see the fan turn on and see the light trying to cut on. It flickers light. It try two times before shutting down. If I see light flicking, does that mean the lamp isn't the problem? I tried to read the code light by holding those two buttons in front of the tv. But am not sure


WOULD YOU LIKE TO SELL IT ..LET MY NO LEE ... Mitsubishi WD-Y57 57" Projection HDTV

Have a mitsubishi 65 inch flat screen model 65735, I replaced the dlp chip because it went bad. I put it back together and now the screen stays dark blue with the timer light on green. I can still hear sound but my screen is so dark blue i can bearly tell its not a black screen. I rearranged the connectors and got different results, one time the lamp light was flashing orange, the other time when i turned the tv on it would turn right back off instantly with the lmap light orange and timer ligh


... Mitsubishi WD-65732 65" Projection HDTV

Hi, I've been using my Samsung HLR 5087 DLP TV since 2004. Right now, if I turn on the power, the buttons light up as usual and the smiley face shows up on the small circle display. But the problem is the screen won't turn on at all.. Is it just the Lamp replacement that could be the problem?? Im debating if i should try and fix the tv or not.... PLEASE HELP....


... Samsung HL-R5087W 50" HDTV-Ready Television

Orange light blinking at the power symbol on lg dlp re 44sz21rd and a sound heard from the tv like some engine noise and tv wont light up or come on replaced new lamp whats wrong help


... LG RE-44SZ21RD 44" Analog Television

Mitsubishi wd-73737 turns on for a few moments then the picture flickers and turns off after a new lamp replacement. A red led appears and I get error code #34. I have carefully cleaned dust out of the unit as many people have suggested but I am still having this issue. I am using lamp 915B403001 purchased from an official Mitsubishi reseller. This is the second time I have replaced the lamp, the first replacement worked perfectly.


... Mitsubishi WD-73737 73 in. HD-Ready TV

Have Samsung HL-S466W- Replaced Lamp (OEM), Replaced Color Wheel, Replaced Ballast. Currently the fan turns on for a few seconds, all three lights blink: Timer,Lamp, Standby. No Video or on screen sound. Lamp doesn't power on, nor can I really hear if the color wheel is activating. What can I troublshoot next before investing more in this model? Already verified the wires are correctly in place and the back door panel is tightly secured to activate the power switch.


... Samsung HL-S4666W Television

I replaced my lamp cartridge in my mitsubishi tv (915P043010). TV worked fine, I shut it off the next day when I turned it on, got only sound. Turned it off took the lamp out of the cartridge and replaced it in the old cartridge, turned it on and it worked fine. Today I turned it on and there was only sound, no picture. What do you think is wrong with it?


... Mitsubishi WD-62327 62" Rear Projection HDTV-Ready Television

TV powers on and the LAMP light blinks. There is no picture no sound. This problem arose randomly and out of the blue. Some sources as well as other answers here recommend to replace the lamp, but the lamp glows bright. As well, I removed the lamp from the housing and everything appears to be intact. The blink codes for this unit only indicate that the unit is powering on and will be ready in 15 seconds. Other sources I have read also suggest the digital main board is toast. Seems to be quite a


... Samsung HLR5667W 56" Rear Projection HDTV

I replaced the lamp on my toshiba 42HM66 and that worked for about 2 weeks. I ordered a new lamp and replaced it. Now the lamp light blinks amber and then the power light blinks green at about 30 second intervals, still no picture.


You will need to check if the output supply going to the lamp is good. If not the ballast will need replacement. That model is actually famous for haveing ballast issues. You can get the replacement ballast from ... Toshiba 62HM95 62" DLP HDTV

Replaced burnout lamp. now lamp flashes amber color and tv will not power up... did power up for awhile, but only got sound, no picture. now like i said lamp light flashes amber color.


Ses120169,\012\012It sounds like when the lamp went it may have damaged the ballast. I have a tip at \012\012http://www.fixya ... Mitsubishi WD-57733 57" HDTV

Wd 60638 mitsubishi model wd 60638 the lamp burned out it was replaced it with a new one now red light on no picture. ballast replacement ;;ballast replacement mitsubishi model wd 60638


... Mitsubishi WD-60638 DLP TV

No picture only sound


... Mitsubishi WD-65735 Television

No picture only sound


... Mitsubishi WD-65735 Television

Problem with Samsung HLS4676SX/XAA Television My samsung tv will not power up, timer light is blinking The timer light on the front of the tv is blinking and the tv powers on, there is sound and then


... Samsung HLS4676SX/XAA OEM TV Lamp

Samsung HLR5067wx/xaa - My says we had a power surge today and the tv turned off. After that, it will not turn on. Press the power button and the greens lights flash on the front for a few seconds then it shuts off. Never get any picture or sound. Any ideas? I don't want ot just go out and buy parts without a clear plan. A bulb sure, but I get no sound either.


It may be the blue switch on the inside remove the small plate covering the lamp and tape the buttton down its on the bottom rigth hand corner ... Samsung HLR5067WX 50" Rear Projection HDTV

My TV in question is a Magnavox, model 15MF 605T/17 LCD TV. It' was purchased new in July 2006, so it's our of warranty. All of a sudden it will not start either from the remote (the batteries are new) or when pressing the "ON " button on the front of the unit. When I press the "ON" bottom the amber light goes to green for about 1 second and then goes right back to amber, so I get no audio or video. I have unplugged the unit and replugged it to no avail. Phillips/Magnavox helpline is useles


... Flat Panel Televisions

Panasonic projection tv model tx 43p950x, there is power loss while I turn on the remote and there is no power when I pushed the button on front of the TV. Before it happen I connect an audio cable on the back right above mark monitor, and the other end to my amplifier audio. Then I hooked up a magic sing in front on the TV. I turn the TV and the Amplifier, both is on, then I turn on the magic sing and it works and I could hear the sound in my Amplifier speaker and so in the TV. Now I turn both


... Panasonic Flat Panel Televisions

When trying to turn it on the green light comes on the front, we hear a small zap sound, sounds like it is trying to come on and then the green light goes out... it will do this consecutively three times with one press of the power button. Then you have to wait 2-3 minutes before it will respond to the button press. We have done this for up to a half hour until the tv finally comes on. What is wrong?


Hello,This type of fault can be repair, it could be a short circuit on the panel power board, remove the back cover of the television in this you have to resolder the panel where you can find dry soldering, but if otherwise a common probl ... GE D52GW12 52" Rear Projection HDTV-Ready Television

Samsung dlp made a popping sound now only have sound and tv turns itself on and off. All 3 lights on front were flashing. I took out lamp...it looks fine....thought I would put it back in when I noticed pieces of glass in the tv directly in front of where the bulb faces. Is this the color wheel? Could it of shattered?


You have a good eye, that would be the color wheel. You can call samsung at 1-800-samsung to find a repair center, it is not an easy job to replace it yourself. ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2020 seconds