Having problems with your Flat Panel Televisions ?

When power supply to TV exceeds 224V the TV switch off. It then tries to switch "on" again and will do so until the power supply to TV is lower than 224V. I ran a AC DC regulater to keep power output to TV as close to 220V. Then TV plays perfect. Aventually I unplug TV and go to bed. I have tried UPS's as well. Same problem. I think power supply unit in TV is damaged due to power surges. I replaced this 2 year old TV with a new one. Costly excercise. I still belive this TV can be fixed.



Answers :

If a power supply is what you want, they are available all over the world, just use the internet like you did tonight and use Google, type in your tv make and model and power supply and you will find them. Parts are really hard to come by now the Quake in Japan has shut down many suppliers. I am in America and we can;t get these here, but you should be able to find them online where you loive.Or simply contact Hitachi for the replacement. The reason the set is shutting down is just as you described it, it senses an over current and shuts down before burning up. The place you bought the set might be your best place to look, or the technician who looked at it should be able to get these parts.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

When power supply to TV exceeds 224V the TV switch off. It then tries to switch "on" again and will do so until the power supply to TV is lower than 224V. I ran a AC DC regulater to keep power output to TV as close to 220V. Then TV plays perfect. Aventually I unplug TV and go to bed. I have tried UPS's as well. Same problem. I think power supply unit in TV is damaged due to power surges. I replaced this 2 year old TV with a new one. Costly excercise. I still belive this TV can be fixed.


If a power supply is what you want, they are available all over the world, just use the internet like you did tonight and use Google, type in your tv make and model and power supply and you will find them. Parts are really hard to come by now the Qua ... Flat Panel Televisions

I think I shorted out the power supply board on my Onkyo HT-R667. I was replacing some the capacitors to repair a hdmi switching issue. I was testing the repair with the top cover off. While it was powered on I accidentally touched the metal top to the top of the power supply board CMKM-P3X. There was a spark and the unit turned off. It won't turn back on. No lights. Can it be fixed or can I purchase a replacement board if this is even the issue. Thanks


... Flat Panel Televisions

I have a samsung lcd tv model LNS-4095DX/XAA. I am getting snowy particles throughout the image. The picture looks great except for the pixel looking particles throughout the screen. I have already replaced the power supply due to some bad capacitors. It was alot worse before the new part. Do you think it is the T-Con or main board that needs replacing? I checked all the connections and tried different cables to see if it got better, it did not.


... Samsung LN-S4095D 40 in. LCD HDTV

My sanyo 50 takes time to warm up then i turn it off ind on again it shows pic i figure its the power supply or ignighter switch cause it shouldnt be out of gas in just 4 yrs i think its a sealed system also my question is how to replace myself and is there any soldering required


There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.If you ... Sanyo DP50747 50 in. Plasma TV

HI, I have a SAMSUNG HLP4663W and the LAMP will not come on when the power is switched on. I replaced the Power Board to the Lamp and the Power Supply Board and all I hear when the power is switched on are three relay sounds.It act as if it will work but no light from the lamp. Thanks! Ken


Have you checked your door relay switch and thermal fuse? Both are indicative of the lamp light flashing.Here is the thermal fuse: ... Samsung HLP4663W 46" Rear Projection HDTV

Vizio VO370M will not power on. Vizio log stays yellow when power button pushed. Problem occurred following lightning storm, so suspecting the PS, but not certain. No physical damage apparent to either the PS or mainboard (fuse is good, no bulging/leaking caps, no burned spots, etc.). When testing PS, 5v connectors supply good 5.3v. 12v connectors have no power, but not certain if they always supply power or only when switched on. Is this more likely to be the PS or the mainboard? Would r


Did you ever finish the repair? ... Vizio VO370M LCD TV

The Power switch is not working on my Hitachi LX4201A...does one get a replacement power panel/circuit/switch for this? I live in Kolkata...who can help me? The power supply reacehs the TV but it just cannot be switched on.


... Hitachi ULTRAVISION L42V651 42 in. LCD HDTV

I got a Sony Bravia KDL-40WL135. Blank screen. There's two LED lights: red standby and green power light. When I turn on the TV, green led comes on, then after about 30 seconds red led blinks once, then green resumes. The green led stays solid. I think that's a SONY error code, I tried to look it up but can't find anything useful. I have replaced the power supply, AU board, backlight inverter, logical board, and the second power supply board. Any suggestions? I haven't checked the t-con bo


Http://www.smpcshop.com/KDL-40WL135-KDL-46WL135-p-8895.html\015\012\015\012\015\012\015\012Above is a link for a service manual.\015\012 ... Flat Panel Televisions

Power supply Hi i have a PHILIPS FLAT HD ready 26PFL5322 I Think i need to replace the power supply board or smth like that but i cant find the prices anywhere or even where could i get 1?


... Philips 26PFL5322 26 in. LCD TV/HD Combo

My haier hlh406bb after power supply replacement power light stays blue even after plug in without pressing power button,can you help?


... Haier HLH406BB 40 in. LCD HDTV

Are there any powerboards or alternate boards out there for a samsung LN52A750 power on power off cycling . capacitors were replaced but i think damage has been done to the powerbd.


The power board is available from Andrews Electronicsbut you should really look again at the capacitors, make sure you placed the in there correctly polarity-wisethe stripe on the capacitor goes along with the marked side on the circuit b ... Flat Panel Televisions

I have an element TV with a MLT070A power supply board. I'm not an electrical guy, but a technician came out and showed me the bulged caps and said that was what's wrong with the TV. He said he couldn't get replacement parts (I think the whole circuit board)but maybe the bulged cap components could be replaced by someone. I don't want to junk this TV and wonder what I should/could do. They're going to send me a $350.00 check for the extended warranty I paid 650 for the TV and 150 for the Cir


Hello,power supply board is dead, if you know basic electronics' and soldering you can handle it ? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up o ... Flat Panel Televisions

Hi, my Panasonic TX-26LXD60 died whilst watching it. It won't switch on and all I get is the constantly blinking red power light. I think I saw in another solution that this would be the power supply board. (Is this the right part? http://www.shopjimmy.co.uk/panasonic-tnp8epl50ab-power-supply.html) How easy is it to fix or does it need a pro? Thanks :o)


... Flat Panel Televisions

I have a panasonic 60in plasma that has no lights at all. I have done my research and replaced the power supply but to no avail, the tv still has no power and I have done everything I can think of. Does anyone know what the problem could be. Thanks Model #: tc-p60s30


If total dead not the fuse or the power board that is rare, the basic answer would be to follow the money or in this case the voltage.The set has a standby supply that ought to be part of the main power board--it will provide voltages for tu ... Flat Panel Televisions

I have Hitachi 65f710 projection tv, that has no power, I found a thermal fuse open in the power supply, I replaced that; the Tv came on but has no hi voltage, the tv has b+ but not at HOT hight voltage transistor. what else you think can be done. Right now I have no picture Thanks


Try replacing the H-out transistor, if yours is convergence IC type, replace it. hope this help, please rate and vote. ... Hitachi 57F500 57" Rear Projection HDTV-Ready Television

Ilo ltc32ha36 tv power supply board MLT169B rev 1.1 ( must be this board and rev) Need the value or color bands for R68 (between x-former and heat sink by C18 and D14) I can barely see the colors on mine( possible heat damage) . It wont power up cold and i have already replaced the caps and found C18 open and R12 and R13(bottom side) got very hot. I am not sure if D14 or R68 are bad Thank you


... iLO LCT32HA36 Television

When plugged in the power switch keeps turning on and off with no picture or sound. Do I need to replace the power supply board or the main board?


... Samsung LN46A630 LCD TV

I have a Hitachi plasma model# 55hdt79 that went black out. No display at all. Sound is ok. We checked the power supply unit and found out that 90v output is missing. We changed the power supply unit assuming that this is the cause, but still the 90v is missing. All the LED lights on in sequence and switch off after loading when I switch on the main power switch. This means no error. The TV can be switch on and off by the remote. Which board is probably the cause of this issue?


It sounds like the transformer on board has gone out (not the one in the power supply) and is no longer charging the panel. the board internally that holds the transformer will have a model number on it, any decent repair facility should allow you to ... Hitachi 55HDS69 55 in. Plasma Television

I HAVE A 55LD520 LG LCD TV. I TURN THE TV ON THE LIGHT GOES FROM RED TO GREEN TELLING ME THE TV IS ON BUT NOTHING ON SCREEN AND NO SOUND. I HIT THE MENUE BUTTON AND NOTHING. 8 MONTHS OUT OF WARRANTEE. TOOK THE POWER SUPPLY OUT AND NO VISUABLE DAMAGE ON BOARD. WOULD LIKE TO TRY AND CHANGE SOMETHING DO YOU THINK A NEW BOARD WOULD BE A GOOD TRY?


First of all, I'm so sorry you are in this situation. This is a story I'm hearing all too often. Did you have the set on a surge protector? What you are describing sounds like a main board failure but the set will need to be diagnosed to be sure. Pla ... LG 55LD520 55 in. HD Ready LCD TV

I changed the main board of my sony 46ex620 and now is turning on for 2 seconds and the red light blink 10 times, I need help. I think I need replace the power supply board someone help me please


... Sony Bravia Kdl-46ex620 Internet Tv Compatible Full Motion

HP 2710m The screen on my HP 2710m monitor keeps blinking off. I think there is a fault in the backlight power supply or inverter. Are they combined? and where do I get a replacement part. It is just out of warranty.


... HEWLETT-PACKARD Hewlett Packard HP 2710m LCD display TFT 27 widescreen 1920 x 1080 400 cd m2 1000 27 in TV

I built a multicade arcade using icade 60 in 1 board, 15 amp switching power supply and using 12 volt LED lit push buttons.i have replaced all of those and the sound still goea out after a few minutes of playing it..HELP


... Projection Televisions

LG 42PC1DG-AA plasma TV (under 4yrs old) 2+ mins of picture broken into horiz bars at start (no sound 2.5 mins) then everything ok when warmed up. Technician says heat damaged Power Supply (+/- board) needs replacement.


... Flat Panel Televisions

50PC1DRA I have the above model plasma and recently had power supply capacitors blown. All were replaced and now the tv stays on with only audio and no video. I was thinking about changing the zsus Should I?


Guessing may or may not help---if the power board had bad caps you may have missed one that looks good and is not OR some other part on the board may be bad--my instinct in this case would be to consider replacement of the power board first if you ca ... LG 50PC1DRA 50 in. Plasma Television

Hello. my samsung HL61650A 61'' DLP tv is about 2.5 years old, and tonight it just shut off. tried to turn back on, got 2 'buzzing' sounds from the back, but it wouldn't turn on. unplugged, undid back cover, put blue switch to 'down', still no luck. now, it won't really even try to power on, and standby & lamp LED lights blink. do you think it is solely the Lamp that needs replaced? help!?


... Samsung HL61A650C Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1315 seconds