Having problems with your Flat Panel Televisions ?

While watching a dvd on the Q2035a I was using a seperate dvd player and I use a universal remote for both the dvd player and Q2035a. I began to adjust settings for the dvd player using the univ. remote. I noticed that I was in Tv mode instead of dvd mode and then the tv just went of all by itsself. The manual power button no longer works on the Q2035a. I unpluged the tv and pluged it back in and the tv automatically turned on to a black screen but you can hear it as being on and the green led



Answers :

Hello, It sounds like when you pressed the remote you inadvertently changed the scan on the ctv. This can cause the ctv ( colour tv ) to change from say ntsc to pal or similar. Even a reset button wouldnt help as it sounds like it is within the setup menu. You could try, as I have done this myself with a similar problem, disconnecting your dvd and putting it aside. Then, pressing the remote when in tv mode and watch for any change in screen flicker etc. If you have the original remote for ctv use that. If as you say, the tv goes to standby mode, you may have damaged the power supply, as the power supply will shut down to standby at any sign of a short.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

While watching a dvd on the Q2035a I was using a seperate dvd player and I use a universal remote for both the dvd player and Q2035a. I began to adjust settings for the dvd player using the univ. remote. I noticed that I was in Tv mode instead of dvd mode and then the tv just went of all by itsself. The manual power button no longer works on the Q2035a. I unpluged the tv and pluged it back in and the tv automatically turned on to a black screen but you can hear it as being on and the green led


Hello, It sounds like when you pressed the remote you inadvertently changed the scan on the ctv. This can cause the ctv ( colour tv ) to change from say ntsc to pal or similar. Even a reset button wouldnt help as it sounds like it is within the setu ... Flat Panel Televisions

Hi. I have a HQ RC UNIVERSE 29 universal remote control. I am trying to use it for an old dvd player, Lumatron. I want to know how to let the remote search for the code automatically. So I need the manual for the remote, or, the correct code for this old dvd player.


... Flat Panel Televisions

I bought a 40 inch Westinghouse led TV. It keeps going back to set up mode. when I am watching something and I try to turn up the volume the TV goes back to set up mode (doest always happen... i would say every three times i do, it does) where I have to scroll down to "connect a game, Blu-Ray, DVD or other player then select my input". its very frustrating. I thought it might be a quirk in the remote so I tried getting a universal remote but it wont connect to the tv at all. I have tried severa


... Westinghouse Flat Panel Televisions

DVD on Curtis LD DVD 199A combo won't work in DVD mode. The DVD won't take or accept the DVD. I have never used the player before today. I did have the label to the back of the unit.


Good day!may i know if your unit is under warranty if yes I suggest to don't open it because it void your warranty.Or Try to used a CD lens to clean the DVD lens inside.If the problem persist just add a comment. ... Flat Panel Televisions

I have tried to retune my acoustic Solutions freeview tv/dvd player (model astvd-31199-s2-id-hd), and it is now unresponsive. I pressed 'tv menu', selected 'settings' and 'auto retune'. It seemed to work, I.e., it produced a progress bar which over a few minutes completed. Tv then went black, and standby led began flashing. The tv will now do nothing else. Unresponsive to pressing remote buttons or tv buttons, won't even switch to an alternative mode (I.e., dvd mode). Tried unpluging and even re


... Flat Panel Televisions

Memorex mt2024 bought used w/o remote. Need to reset back to original settings. There is a parental control on a couple of channels and I don't know the password. Here's the BIG ISSUE, though: I have hooked up 3 different DVD players and EACH time get VIDEO/DVD CHANNEL LOCK message. Is there a way to bypass this w/o a remote?


To unlock all its locked functions, you must have its original remote control A universal remote control won't go. Try to get its original one. Don't waste more money by buying a universal remote control. ... Standard (CRT) Televisions

JVC AV-25P8-PH TV turns on (the standby mode) with the red light, but when we try to punch in the channel (using either remote or the push buttons on the television itself), the red light becomes green then automatically shuts off. We can't get to work the TV even if we plug it directly on the wall socket, nor unplug then plug it again. Just goes on and on. What do we have to do with this to make it work?


Hello,The issue you describe is consistent with a power supply board issue. This is the board where the AC goes to. This problem may have occurred as a result of irregular power supply, or excess power supply or power surge.Th ... JVC AV-32260 32" TV

My Emerson SLC195EM8 stays in standy mode. whether I use the remote or manually try to turn it on, it flips back to standby. I also tried unplugging it hoping to reset any factory setings and still the same issue HELP, lol...


... Emerson SLC195EM8 LCD TV

When i switch my xbox 360 on the screen comes on in black and white and shakes from side to side,? also when i switch on my dvd player it automatically zooms in and i have to switch off and restart for it to go back to normal, it never used to do this! is it my tv that is the problem?


It is most likely your inputs that are messing up. This links to the mainboard of the tv (tuner board). You will need to check that your systems are properly hooked up and "snug" on the ports. If that doesn't fix the problem you will need to seek a n ... LG 42LG30 42 in. LCD HDTV

My LG 42LC7D HDTV occasionally will not power up (remote or manually). I unplu it for a day or so then when its plugged back in, it turns on as if there wasnt a problem at all. No other games, dvd, or blue ray players are connected and i used cable from a dvr box.


Caps leaking on power supply ... LG 42LC2D 42 in. LCD HDTV

Want to just use in the video mode..Hooked it up to cable tv works great..But now I can't get back to just video mode..Also I bought this TV used and has no remote..Is there a way to get back to only video mode as this is all I use it for,, Thanks for any help on this..


I also have this same problem if anyone would know the answer, called the support phone # on back of TV about 1/2 hr. ago it is 6:50 pm 3/27/11 so. california usa, time.. It is 1-800-605-8379 waiting for reply..If I get a reply and solution I will c ... Durabrand DWT1304 13" TV

I have a samsung dvd surround sound, I am trying to connect my comcast remote to it, however NO CODES work for this. Apparently this model has a hard time using another remote. I know it works, because it worked with my old comcast remote, I just don't know what code was used! I tried every code comcast gave, but this samsung dvd player won't take it.


... Samsung Flat Panel Televisions

I bought a LC DVD 199A in November for a Christmas present. Until today, I have not tried to used the DVD player because I haven't really had a chance. I put the source mode to DVD but the DVD won't load, I did press lightly, the DVD went in only part way and I removed it. Why won't it load? Also, it goes from DVD mode to TV mode in a matter of seconds which is frustrating as well. What can I do. Of course it is out of warranty. Help? Patty


The DVD player has a problem with the loading mechanism. Probably something has dropped inside it such as a coin or something else. It is really a simple problem. The reason why it would switch back to TV is because it is getting stucked. Get a flash ... Curtis Flat Panel Televisions

I have a lg 32lc5dc that powered off by itself and now when i unplug it or turn it on with the remote the remote no longer works and i have a snowy screen. It will not power off when i plug it back in it just comes right back on, every once in a while it will stay powered off when i plug it back in and the remote will turn it on but then the remote will not do anything else. i have changed the batteries and used the reset button on the back of the tv i dont know what else to do


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this ic is got short or may be weak.so due to this when you start the TV the current passes fro ... LG 32LC5DC 32 in. LCD HDTV

I accidentially turned pip on using my comcast remote. I pressed TV then the Help button and it went into pip mode. I tried using the same method to turn it back off but all it did was blink and come right back to the pip mode. Please help me


... Sony KV-27XBR45 27" TV

Sansui dtv2798 I don't have the original remote. We have been using a universal remote successful. Now, for no reason we can see, the TV can NOT access the DVD player. There is no "channel" which lines up with the DVD player. Please advise. Amanda Buxbaum buxbaum5@verizon.net


Use a av cable ( rca cable ) and then select the av input ... Standard (CRT) Televisions

The original remote control for Teletech TV is blocked. Grandma pressed something and suddenly the remote got stucked on a channel. She thought it is ok to turn off the TV, cause the remote was not answering to any commands. But after she turn the TV back on (pluged-in) the remote was useless. I bought a new remote, compatible with the original one, and the TV is working fine. I guess the remote is somehow blocked. Is there any combination of keys I can use to un-block it? Like get ity back to t


Click here to know more about it. ... Standard (CRT) Televisions

I HAVE A TOSHIBA DVD PLAYER SD270EKE3 AND I LOST THE REMOTE CONTROL.I TOOK A NEW ONE (AMTECH) THAT SUPPORTS 20.000 MODELS OF DVD, TV, ECT. I CANNOT FIND THE CODE.THE DEVICE CODE TO MAKE THE REMOTE CONTROL WORK.AND ONE MORE QUESTION : MY OPTIONS ARE :TV1, TV2, VCR, SAT. IN TV2 IS CONNECTED MY PLAYSTATION. IN TV1 SEEMS THAT MY DVD IS CONNECTED.SHOULD I TURN THE OPTION (FOR THE DVD) IN THE VCR MODE?


... Flat Panel Televisions

I have a Dynex Bluray Player and when I connect it with AV Cable it shows Dynex DVD Bluray Player Details and works then once I place a dvd inside play it and after a while stop it, it then switches off and when I power back on it powers button light up blue but no picture on TV..Is it the AV Cable or the Player? And the Player is in New Condition with Remote and Manual!


... Dynex 32 in. LCD Flat-Panel HDTV

I have a Insignia DVD player connected to my Emerson HDTV. I used the channel Video1 to play DVD to see movies. It worked well until my son randomly pressed the Insignia DVD remote control. Now whenever we try to see movie using the channel Video1, the screen shows ' not supported format'.


Hello did you try to reset the system of your TV?go to the menu page and look for the reset command..thank you ... Emerson LC320EM9 32 in. LCD HDTV

We purchased our DVD player about 3 mths ago and everything was fine, then about a week ago after the kids were watching TV and went to record a show the DVD turned itself off. Now when we turn on our DVD player we get the welcome note on the display window and as soon as the welcome has disappeared the whole thing automatically switches itself off. We cannot do a thing with it! I have even tried unplugging it overnight and then connecting in the morning and nothing changed. Any ideas


If you only purchased it 3 months ago it should still be under warranty.\015\012\015\012Just bring it back to your place of purchase for a refund or exchange. ... Flat Panel Televisions

Sir, I have a Toshiba CT-90159 home theater> Since yesterday I am getting a ping color on the screen.I put it under the HDMI mode (06). I am using a Philips DVD player. Till yesterday I have been able to watch DVD player on this home theater. I have changed a new HDMI cable. Please mail me how to resolve this problem. Thanks Sridhar


... Toshiba Flat Panel Televisions

My Sony DVD player has no sound but everything else works. We tried using the universal remote, and the dvd remote but it still won't work, So what can i do?


On your universal remote you should have separate buttons for different devices: 1) TV, 2) SAT/CBL, 3) DVD/VCR. Be sure to press the one for TV when adjusting the volume of the DVD player. Good luck. ... Flat Panel Televisions

Sharp Aquos LC-52D92U TV won't show picture when turned on using remote. But if you start from an unplugged state, plug it in and start it, it works. The problem is when you turn it off using the remote, and you want to turn it back on again, it will only show you a black screen.


Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish ... Sharp Flat Panel Televisions

I have a Hitachi Flat Panel TV that is connected to an HDMI box. I am using a CLE-997 remote control. I was watching a DVD, pushed the HDMI1 button on the bottom of the remote by accident, and now can not get it back to the dvd. Please advise.


Good day!Just look at the remote and find where is the TV/video and push it view the played DVD disc.If it is not functioning try to reset the power of TV and DVD player.Unplug it and after 10 minutes to 20 minutes plug-in aga ... Hitachi P50V701 TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1647 seconds