Having problems with your Flat Panel Televisions ?

I keep getting a massage on my screen that says the set-top's hdmi port requires an hdcp compatible tv input.I brought a 80 dollar hdmi cable and I get the massage so then found the hdmi cable that came with the tv so I used that one and still get the same message



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I keep getting a massage on my screen that says the set-top's hdmi port requires an hdcp compatible tv input.I brought a 80 dollar hdmi cable and I get the massage so then found the hdmi cable that came with the tv so I used that one and still get the same message


... Flat Panel Televisions

I have a technisat hdfv desk top box. I have been trying to connect in via the hdmi connection. I keep getting the message mode not supported. It works fine via the scart connection. I have tried changing the hdmi cable but still get the same message. I know the hdmi connection on the tv is ok as I can run a blue ray from it. Took it back to the dealer they tried and got same message. They thought it could be a fault with hdmi on the box. The unit was exchanged. Tried again but still get the sam


You might want to see if a firmware upgrade exists for this issue in the Samsung set you have. ... Samsung Flat Panel Televisions

Just bought an new 40'' Dynex. When I plug my HDMI cable on my TV and the Rogers box I get the following message. HDTV does not support HDCP. Please use the YOrPb component connection to watch TV. Wha


... Dynex DX-40L260A12

HowHow do I get the HDMI to work on TV input? I am using HDMI cable from digital cable box to HDMI 1 input on tv. I get


... Insignia 42" LCD Flat-Panel HDTV

This RCA L26HD31 TV has always worked fine in other respects... but when I try to connect my pc's hdmi cable to it for use as a monitor, I just get "unusable signal". When this TV was made, hdmi outputs on laptops was not the norm - it was vga. Can this TV use an hdmi signal from a dell laptop? Yes, I'm using the correct input for the TV and have tried hdmi1 & 2 ports. - Thx


Make sure you have set the laptop's display properties to as low a resolution as possible (also make sure the screen refresh rate is 60 hertz) and turned it off before connecting it to the television. Turn the television on first and set to the corre ... RCA L26HD31 26 in. LCD HDTV

I have a LG 32LH30 TV. When I power on the TV I get a picture in the top half of the screen and vertical lines in the bottom half. Also I get a thin white dashed line across the middle of the screen. After about 10 minutes I get full screen picture. However the top third of the screen is lighter than the bottom two thirds. I still have the thin white line across the middle of the screen. I am using HDMI cables from my cable box. I also tried Audio/Video and Component cables. I took the back


... LG 32LH30 32 in. LCD HDTV

Hdcp compliant vizio 55" - now recieves message stating set op hdmi port requires hdcp compatible tv input. switch to a compatible input or do not use set top hdmi port. If TV input supports HDCP then the hdmi cable may be at fault. Purchased new HDMI cable tried on all 3 hdmi input ports. No success. How do i correct this problem?


... Vizio Flat Panel Televisions

I have an Emerson LC401EM3F which I purchased 2 weeks ago. When I connect my dvd player to it with HDMI I get picture but no sound. When I connect my laptop using HDMI it won't even recognize a connection. I have 2 other TVs which I connect to a computer using HDMI without any hassle. I have verified that the dvd player, cable and computer work with other TVs. Any suggestions?


... Flat Panel Televisions

My Durabrand dwt1304 was hooked up to cable. I now have relocated the TV into my workshop and am attempting to hook it up to a digital converter and an antenna. Turning the TV on, I am getting a "Helpful Hints" message on the screen that asks if I have performed an "AUTO PRESET CH". I found this on the remote's menu and ran it, after which the screen gets the message, "NO TV SIGNALS". At that point, I can get the TV to do nothing else. Trying to run through setup with the digital converter


I suggest to go back to the menu and make sure in the connection or signal type to select antenna.. Since you had it hooked up to cable it may not have been selected to go back to antenna. Hope this helps you out. ... Durabrand DWT1304 13" TV

I have a toshiba 46XV550A flat screen. I have previous been able to watch video from my laptop via HDMI, however now when I plug it in all I get is the TV going from blue to black screen. The laptop LCD screen also used to turn off and you could toggle between using it and the TV screen using Fn F8, however the laptop doesn't seem to recognise the TV anymore... it keeps the visual on the laptop even when I plug in the HDMI cable to to the TV and Fn F8 doen't seem to work any more - do you know


... Flat Panel Televisions

Panasonic Viera 1080P Plasma TC-P50S2 - Error Message: DIAGNOSTIC, HDCP Authorization Failure HDMI Port Disabled - All HDMI ports not functioning, tried different HDMI cables with no luck. Set works fine using jacks from cable box to set.


... Panasonic TCP50S2 50 in. TV

I have a 47 lg lcd tv bought in 09. When i use hdmi for xbox 360 i get picture and sound but with ps3 no pic no sound. I just bought a sony bluray and get pic but no sound. I bought a lg bluray and get no pic no sound. I have tried 2 or 3 different types of hdmi cables but nothing so far has given me sound and picture...help please.


... LG 47LF11 LCD TV

I am having issues with my RCA Scenium D52W135D (playstation 3 connection). Recently, I have been having a very specific problem with this combo. I have it connected using HDMI to a Pioneer receiver (model# VSX-821-K). From this, an HDMI to DVI cable to the TV for HD picture. In the past, no issues at all. Recently, I can play DVDs/bluray discs and get full picture and surround sound. I can play PS2 games and get picture and sound. When I try to play PS3 games, I get sound through the rec


Had the same problem. With mine the other day you probably moved your Playstation 3 too another tv and set your 1080i,720,480 to high deaf on settings in Playstation. You have to change them back to automatic that TV says HDTV but it only plays Plays ... RCA D52W135D 52 in. TV/DVD Combo

I cant get a picture on my nec lcd4000. I'm using a hdmi cable to the dvi from the ps3?


... NEC LCD4000 40 in. HD-Ready Television

I'm getting trails using an HDMI cord on my Vizio 32" TV. Is thsi because the HDMI is too fast for the max 720p resolution? Should I switch to component cables? I'm also using a Bluray player when it happens.


This problem is actually called Ghosting.Ghosting is what happens during high action scenes or during any scenes that have low light.There's really no way to fix it other than getting a better tv. Vizio isn't really the greatest.The ... Vizio L32 32 in. LCD HDTV

Im trying to hook up my first gen 60g ps3 to my sharp lcd monitor, pn-455. im using hdmi for my ps3 - dvi for the monitor. all i get is a black screen. i've tried doing a hard reset and still nothing. if i use the component cables for the monitor it works but the picture is not 1080i. if i hook up the monitor to my laptop with the same hdmi-dvi it works with my laptop. why doesnt it work with the ps3?


... Sharp PN-455 45 in. LCD Television

I have been using the tv with my sony ps3 to play my blueray dvd's etc. using an HDMI cable all of a sudden I cannot get a picture anymore. I think maybe my HDMI input on TV has gone bad. Can I replace/fix this myself my purchasing a card?


Yes you can replace the input board, but that is fairly expensive. HDMI cables can go bad, have you tried a different HDMI cable? Also try hooking up another device to the HDMI input to see if it might be in the Playstation3. ... Panasonic PT-60LCX64 Television

Hi, i have a lcd toshiba regza LV733N, and i get no audio when connected to pc on hdmi connection. but i do get audio on the same hdmi cable when is connected to my ps3. on a lcd panasonic, both the video and audio connection works fine. i use win 7 x64, and the sound icons mutes when connected to regza. thk you


You must use HDMI 1 port when conected to a PC (to have a picture). Also set the audio in to HDMI not to PC. Look at SOUND/ADVANCED AUDIO. You can use separate analog cable also... Please just read the F manual ... Flat Panel Televisions

Why do i not get a signal form my Technicika STBHDIS2010 set-top box to my Bush LCD32TV022HD TV using the HDMI cable?


... Flat Panel Televisions

I have a Hitachi 42PD7200 plasma tv. The hdmi port works with the new xbox 360, satellite tv and until recently my Samsung bluray player. When the bluray is connected (via a 4 port HDMI switcher of directly to the TV) it shows the bluray starting up with the Samsung logo and then gives the message invalid frequency. At this point the picture and normally sound are lost. I have connected the bluray to another TV using HDMI, the same cables and it works fine. Has anyone come across this problem


... Hitachi 42PD7200 42 in. HD-Ready Plasma Television

I get a weak or no signal message on my new Samsung plasma. I'm using coaxial to my cable box. The cable works fine because I can see the vcr when it plays. I have it set to cable on the right channel for my area (4).


In this case, your VCR becomes the cable channels tuning device for your TV, the better connection should be from your cable box output to your antenna/cable TV input with the coaxial cable, surely, your TV has a better cable tuner than your VCR, to ... Flat Panel Televisions

None of my component inputs are working i have hdmi hooked in for cable, a computer hooked in to the computer jack, and they all work fine. i tried my xbox 360 in every available input with the component cables and get no picture or sound i have used multiple sets of cables


Did you switch the Xbox HD switch to the off position? ... Sharp LC-C4654U 46 in. LCD TV

Hello, I have a sharp lcd tv model-LC 32AF10N, and have the problem of not able to get the sound, since I am using the HDMI cable. but I can get the picture .. Can anyone help me to know why? please.


... Flat Panel Televisions

My problem is getting a "This signal is not supported message" on an HDMI input into a Pioneer PDPR05G media receiver.


... Pioneer Flat Panel Televisions

Why doesn't the Sharp Aquos recognize the DirecTV HDMI signal? Tried putting in HDMI cable and that was the message that came up on the screen.


... Sharp Aquos LC-42D62U 42 in. LCD HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2206 seconds