Having problems with your Flat Panel Televisions ?

I replaced both the ballast and lamp. still cycles 9 times and goes into protection mode (both lights on). I am $300 into this and still a dead TV. Any help would be appreciated.

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I replaced both the ballast and lamp. still cycles 9 times and goes into protection mode (both lights on). I am $300 into this and still a dead TV. Any help would be appreciated.

... Flat Panel Televisions

I have a samsung syncmaster 320p and my screen would just flash and flash with the blue light you could change it to component and all that except it would still just flash. now it will not even turn on it does not have the power light even come on when we plug it in. if you could help me i would appreciate it thanks.

... Flat Panel Televisions

I have a panasonic plasma TH42PZ77 picture went off last night still had audio. I thought it was my dish tried a blue ray still no picture. The control diplay on tv still show volume etc. I'm not getting any error diplays. Any help would be apprecieated Thanks Al Davidson

Did you try your display settings? ... Panasonic TH-42PZ77U TV

PLEASE HELP! I awoke this morning to find that some how half of my tv doesn't work. The left side of the screen is red and blinks on and off, while the right side works perfect. The sound is still fine, just seems to be the picture. Any help would be much appreciated. Thank You for your time.

Check the screen back light as will as the inveter board which have loose contact or dry joints. ... Samsung LN46C530 TV

I need detailed schematics with wire codes and values for diagnosing problems I am having with a Westinghouse SK-26h520s. The original problem was a dead machine, no indicator light so no power, replaced power supply now have indicator light but no sound or backlight, figured bad main board. Replaced board, made no difference. Any information, help or schematics with points and corresponding values to test with a volt ohm meter would be greatly appreciated

... Westinghouse SK-26H520S 26 in. LCD HDTV

Hi, i have a curtis lcp 4210 plasma tv that after its on for awhile i lose picture but i still have good sound, if i unplug it for a few minutes it will work again for awhile. any help would be greatly appreciated. thank you.

... Flat Panel Televisions

I have a Mitsubishi rear projection Model VS-45607. Built in 2000 SN 109615. Has always had a great picture but now it is dim at power-up and a little too reddish. As it warms up it gets brighter and the color balance is better but still dimmer than it used to be. We really loved this TV and I an an electronics engineer hoping to fix it. Any helpful suggestions would be much appreciated. Bill email [email protected]

... Mitsubishi VS-45607 45" Rear Projection Television

HI. just bougth the LG 47LK450.Colors have green and blue tint only. tried to calibrate based on the suggested setting that I found on the internet for this unit (adusted all the collors and britness)still shows in ostly green and blue. any help would be appreciated. Thank you. Lana

Are you connected to Cable, DSS, DVD etc? are you using a component cable or HDMI? If it's component, check your cable color connection. If your devices have a setup video section, make sure it's set to "Component" If all of these are correct, try a ... Flat Panel Televisions

Hi i have a samsung ue40c8000, im getting problem where the left half of the screen goes all fussy with a bad picture but the right side is fine. If you tap the tv it goes back to normal again. Ive changed the power board and the Tcon board but am still getting exactly the same issue. Where do i go from here? Or is it scrap? Thanks, any help would be much appreciated. Rich

... Flat Panel Televisions

We have a Hitachi 57XWX20B Rear Projection TV. We moved this week and now the TV picture is very dark. We have tried the magic focus and adjusted the brightness, yet the picture is still very dark. Any help would be appreciated.

One of two things on this model==clean the lens on top of the chassis--the round large black ones.Second: there is a resistor in the power supply that changes value and will cause this----also with set unplugged and back off since set was m ... Hitachi Director's Series 57XWX20B 57" Rear Projection Television

I have tried for 2 nights now trying to get sky + remote to switch off my Sharp Aquos Lc22dv200E using code 0093 without success,Ihave bought a new sky remote still no joy any help would appreciated

... Sharp Aquos LC-42D62U 42 in. LCD HDTV

I have a hannspree xv-s tv and the hdmi port has suddenly stopped working, it's definitely the tv because I tried my ps3 and xbox 360 both with different hdmi cables and even a 3rd brand new cable still no joy, I even took the panel off the back of the tv and had a look at the hdmi port and it was solid so I doubt anything has pulled away from where it should be, any help would be much appreciated as this is really doing my nut in lol thanks

This is no help whatsoever but I found your question following a search after having EXACTLY the same problem. Do you get 'no support' on-screen? I have a horrible feeling I might having broken the socket moving my desktop around :-( I'm wondering if ... Flat Panel Televisions

RCA 32LA30RQ power light red at plugin , No function after that, dead, no key function. all supply voltages 2 volts under normal. Uses IPB733 inverter supply board RE46DZ1202. A schmatic would be a great help! Been a master bench tech for 30 years ,Still building my data base of new Bad designs.. Never ending fail by design.

... Flat Panel Televisions

I've had a Toshiba 27A50 tv for just over ten years. I have cable hooked up to the tv without a box. For whatever reason, the last couple months our channel 4 (which is NBC) has a static sound in the background but it is the only channel which has this issue. The picture is fine. Not sure why it would only be happening on one channel and no issues with any of the others. Any help would be appreciated as to what potentially may be the problem and if there is anything I can do or check to help

... Toshiba 27A50 TV

I have an LG 50inch tv. Model 50PG3000. My problem is when I put in a USB stick it don't show up on the menu?? It still show the hdmi/scart/tv an all but nothing for usb, anybody have any ideas on how to help me plz?? Any help would really help me....

... LG Flat Panel Televisions

I have a PowerPoint tv and DVD combo and have a PowerPoint remote I have a blank blue screen with a red lock in the bottom left corner after my daughter pressed some random buttons and nothing I can do is helping. I found a previous question like this but even though I have a PowerPoint remote I couldn't find the buttons mentioned. Any help would be greatly appreciated. SINEAD

... Combination Televisions

My sansung plasma pn51 model is not turning on, it was working just fine and then next day it would not turn on, there is only one click and 5 red blinks from the standby botton,does someone know what this means, any help would be appreciated ,thanks

5 blinks 5v SOS D Board is the fault. Means, 5V supply line is either absent, or this line is shorted. You have to check it. If you wish to get more details about the blinking codes to Plasma Displays, check this link. ... Flat Panel Televisions

I have a 3 yr. old Panasonic model # TH-50PZ80U flat screen T.V. a month ago , after watching T.V for short while , then turning off, then turning back ON screen would be black, no sound or picture, red little light on front bottom blinks 10 times stops for a few seconds then repeats the 10 times blink & so on, until unplugged. The T.V will start to work if left unplugged for 1 hr. or so. Whats the problem ? What part would it need ? Appreciate the help. Kirstin Tidwell in L.B. , CA

The full fault guide explaining this and the solution can be downloaded athttp://www.mauritron2.com/downloads/Panasonic/while for the service manual googlemauritron.com ... Panasonic Flat Panel Televisions

Tv powers on, has sound but no picture. All three lights are working & will show the input display but distorted. I would like to do the repair myself but am not sure if this is a convergence issue or something else. Any help would be greatly appreciated.

Even if a convergence problem exists you should still have a picture, a bad one but a picture----call the menu up with the Mitsubishi remote and select convergence and then advanced---a grid of lines will appear in green---got dramatic red and blue s ... Mitsubishi WS-65905 65" Rear Projection Television

Stereo 25ZT120 My dad listens to record albums on this stereo all the time. One day he said he heard an "explosion" and then no more sound. The record player still works - the turntable still turns- but the volume is very, very low and cannot be adjusted. The radio does not work at all - cannot be tuned into a station - no volume at all. He seldom uses the radio, but he misses the turntable. Any troubleshooting advice you can give would be appreciated.

... Zenith Standard (CRT) Televisions

Dead RCA TV model # P60752EB. My TV would make a click sound and the picture would flash like it was going out about once a week. It went off for good and now won't turn on at all. Someone suggested a power supply problem. I'm sitting here staring at the power supply board :( please help! I love this TV!

The PS suggestion is likely on the money.\012You have a couple of choices-\012- Buy a new board from RCA\012- Buy a used or repaired board; one source is:\012 Jimmy's Parts ... RCA Projection Televisions


... Sansui Flat Panel Televisions

Can you help me with a new 32 inch Philips flat screen TV that I cannot get my DVD to indicate a picture, yet I do get audio. The model is 32PFL3505D/F7. I have downloaded the latest software release version, ZPBF2QA_078_0_3202, and still same results. The DVD player is an LG Brand, model DV172K. I have tested that on another flat screen TV and it works fine, yet with the Philips TV I just get audio and no video, and have tried several ways to hook up the wires. Still all same results. It jus

... Philips Flat Panel Televisions

I have a Mitsubishi TV, Model VS-5011, Serial # 112892... yesterday I tried to use the PIP to watch a baseball game and also a movie... we have Direct TV and everything was working fine until I tried to use PIP... then the screen went to a snowy effect on ANT A and I cannot seem to do anything to get it back... can you help me... any help would be greatly appreciated... thanks, Susan

Hello Susan,\015\012\015\012As you have DirecTV, I'm assuming it's connected to the TV with an AV cable rather than a coaxial cable.\015\012\015\012In this case, you can get the DirecTV channels back by pressing one of the ... Mitsubishi Projection Televisions

Panasonic plasma tv 42" with a black line from top to bottom about an inch and a half wide. Any help would be appreciated

... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1309 seconds