Having problems with your Flat Panel Televisions ?

Philips 42pfl5522 LCD TV. Digital channels no longer work, when i select the digital channels with the remote either with the Digital MENU button or the EPG button I just get a small blue cross appearing in a box in the top left of the screen. Using the A/D button or the AV selection button simply takes me to a blue screen. It's the first time the TV has been used for a few months (having been to Australia for a while) but it did work when we got back for about a day. I'm not sure if



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Philips 42pfl5522 LCD TV. Digital channels no longer work, when i select the digital channels with the remote either with the Digital MENU button or the EPG button I just get a small blue cross appearing in a box in the top left of the screen. Using the A/D button or the AV selection button simply takes me to a blue screen. It's the first time the TV has been used for a few months (having been to Australia for a while) but it did work when we got back for about a day. I'm not sure if


... Flat Panel Televisions

We have a 4 year old Visio HD TV. Recently we had time when both the HD channels and going up and down using the channel surf buttons did not work. The low Def channels would work and entering the channel (12) works. This is now happening most of the time. Is the electronics on a TV replaceable and cost-effective?


I don't believe that it is cost effective. BUT, if you have Comcast, you will now need a cable box to watch most channels now. I believe they stop at about channel 12 without the box. It's their way to stop cable thieves, but it's an inconvenience ... Flat Panel Televisions

Hello! We have a Sharp 27U-F510. It has been working very well. We have only been using the remote to turn it on/off and for volume. We are using a digital converter box for channels. My wife tells me that she may have depressed and held the "lower volume" button prior to the problem. The TV turned off, and she noticed she was pressing that button. I have tried turning the power on with the remote and at the front of the TV. No effect. I have checked the power connection at the wall, an


The on\\off stwich may bad or powertransistor and eleccapacitor are bad ... Sharp 27U-F510 27" TV

My wt-46809 Still has a good picture. It receives its signal from an HD converter box from Time Warner Cable. The other inputs on the tv however don't seem to work. I can't use my DVD or hook up any game systems through the various inputs. In addition, while the HD channels (1000 and up) work, channels 1-999 don't project a picture (only audio). I've never added any HD retrofit to the set, so I'm not sure if true HD is being projected or if the picture is just very good digitally clear SD.


\012TV needs servicing PLEASE TRY THE BELOW FIRST THEN DO A FULL SYSTEM RESET\012\012\012CERTIFIED TV EXPERT HERE, follow this information I provided 3 long solutions to this issue/s Solution 1 Before we start taking things apart, lets try your ... Mitsubishi WT-46809 46" Rear Projection Television

I own a 50PL9126D/37 50 in DLP TV I bought used and the picture is dark so I took it apart because I was told it could be dusty or could be the lamp. After I cleaned the inside screen VERY carefully with a microfiber cloth I reassembled the set and now the power button or blue doesn't come on nor does the remote work anymore. Plus the TV is still dark, which I figure must be the lamp. I can turn the TV on by plugging it in and hitting one of the side buttons (different one every time) and then u


Dlp tvs have dark pictures,first thing u must be alway change the tv projection lamp.Specially,if u bought used,because u don't know how long the projection lamp been inside that tv already.After u change the projection lamp,still have problems or he ... Philips 50PL9126D/37B 50" DLP TV

My UNIVERSAL REMOTE (from shaw cable company) won't respond to my TV: LG 32LG30 . Got another universal remote, same problem. Can't use power button or volume on the UNIVERSAL remote but it will change channels through the digital box but nothing else will work. Have sought help from shaw to program remote to no avail. Is this a common problem with remotes? The remote that came with the TV doesn't work either. According to the shaw service this TV remote should turn the TV on &


... LG 32LG30 32 in. LCD HDTV

Match Line IDTV 100Hz Digital Scan The remote will not work and all I can achieve with the manual buttons is a blue screen


... Philips Standard (CRT) Televisions

Match Line IDTV 100Hz Digital Scan The remote will not work and all I can achieve with the manual buttons is a blue screen


Try as you turn set on to instantly press and hold menu. ... Standard (CRT) Televisions

I have an NEC NLT-40HDB2 with some odd issues, the input (changing to hdmi/ avi) and channel up buttons don't work even when using a logitech universal remote, the buttons on the side of the set d


... NEC Flat Panel Televisions

My JVC HV-32D40 BK TV is not recognising any TV channel and if I select Menu and Setup to re-tune nothing displays at all on the screen. It was working fine and then I went to change channel and it stopped working. I cannot change to any channel or use the Guide. I can use the TV with my DVD player connected by SCART accessing digital channels and DVD.s. Any suggestion on how to reset the TV?


... JVC Flat Panel Televisions

I have a Sony KDL 32w5500 with built-in digital tuner. I used to be able to watch freeview channels directly from the TV without any other digital tuner box but 2 days ago, the TV tuner seems to have stopped working. If I connect a digital tuner box to the TV, then it works fine (image, sound, etc. work normally). It just seems the built-in tuner stopped working. The TV is 3 years old and was bought in the Uk but I am not living there anymore. Is there a way to fix this without taking it to an e


... Sony BRAVIA KDL32V5500 32 in. TV

LG37LG5020 Our remote control batteries died, so we used the side panel buttons for a while. This morning, after our son used his Playstation on the TV, the TV won't programme channels in and is saying to check the antenna connection. The antenna is still connected as it was yesterday, when it was working fine. TV works fine with the Playstation, just won't programme channels (autotune)... Have done a factory reset. All advice very welcome!


Hi. that:s be reset factory could do. if no you need a technician . good luck! ... LG 32LG30 32 in. LCD HDTV

Sharp 70 lc70le847u . When turning tv on unable to change channels and remote will not work. Must turn tv on and off several times for tv to operate. After that digitals channels are non exitant. Must run through channels search and then tv works fine. It takes 20 minites to get the tv working everytime I turn it on. Help.


It sounds that the main system control memory IC has damaged. Do a reset to this set and check. Refer its user manual to know how to make it a hard reset. ... Sharp 70" Quattron LED Smart 3D TV - LC70LE847U

I have a Westinghouse 26 inch LCD tv model ak-26h240s. We watch only 2 channels on this set twice a day. Lately when we turn the TV on we momentarily get sound then the sound goes off. We tried other channels and they work fine and we receive sound...but not on our preferred channels. During different times of the day we will turn these two channels on and everything works perfectly. BTW, this television is in our bedroom and we use it to watch morning and nightly news.


... Westinghouse 26" LCD Flat-Panel HDTV

Not all of the buttons on my remote for my Celestial G6C52H-C1 work and I have accidently selected panal lock on the tv. Now I can't use the buttons on my tv and the broken buttons on my remote wont allow me to scroll down the menu to unlock it. Please help because I can only watch a few channels and that is it. I can't even change volume or put it on av to watch a DVD. The enter button on the remote doesn't work either. Thank you. Liz.


... Flat Panel Televisions

Toshiba 32AF44. While watching a baseball game yesterday, the volume bar appeared by itself and scrolled down to zero. The bar will not disappear. It's like someone is holding the down button. Tried using the TV remote to raise the volume, change channels, turn TV off. The remote changes nothing. So, I took batteries out of remote to isolate the problem to the TV. Using only the buttons on front of TV: On-off button will not turn off the TV. Volume-up button works until I release, and then


... Toshiba 32AF44 32" TV

What's your problem?i have a 32c3030 not able to access digital TV on it, can use it as a monitor, but the digital channels are not working ? please reply to [email protected]


... Flat Panel Televisions

Have a pioneer pdp 508xda, remote not working even after trying new batteries. Unable to access all channels using the buttons on the tv, only limited number of channels available (less than half). Is there a universal remote that i can purchase that will work with this tv as the people at jb hi-fi said they will not refund money if we buy universal remote and it doesn't work.


Try website like Remotes.com to buy an exact or very close to the original remote. ... Pioneer PDP-5080HD 50 in. Plasma HDTV

I have a thomson dti 6300-16 set top recorder box. i live in derby and have experienced the digital switch over. my tv after rescanning is perfectly fine, with no loss of service or channels. however my set top box has failed for the last 48hrs. i have rebboted several times and completed auto scans. everything works and i can watch all the channels through my set top box on my tv, my pre recorded programmes are still successfully there and working. but no information on the channels appear now


... Thomson Flat Panel Televisions

Samsung LE40R73BDX/XEU channel saving problem. I have had to do a reset to the TV because the 'D Menu' was not accessable. The reset has got back all of the digital channels (as well as the analogue) and the TV works ok until it is turned off (power standby). Now each time that the TV is turned on all of the digital channels are lost resulting in having to do a retune. Any solutions to this problem?


... Flat Panel Televisions

I have a 1080p HDTV LCD model # DP46841 and it will not scan all my digital channels. They work on other tv's but does not work on mine. I have tried to rescan many times.


... Sanyo 46" Class LCD 1080p 60Hz HDTV,DP46841

Subtitles On some channels teletext shows up on screen instead of the usual subtitles, so I have to press the CC button a couple of times to turn it off. But after I do that, other channels lose their subtitles so I have to press the button once again. There is no option in the menu to permanently solve this issue. Any help would be useful.


... Sharp LC65D64U 65 in. LCD TV

I have an AOC LCD tv when I hit the power button the light turns blue and then right back to orange, at first it would eventually come on after pressing the power button several dozen times and work fine until it was turned off, now it just goes from orange to blue and back to orange or the light goes out completely. I saw a video that said when it does that it could be the power supply or the main av board, what do you think?


Hi there , sound like it may need output caps replaced in the power supply . ... AOC L26W861 26 in. LCD TV

I have a Vizio TV that is stuck on RGB mode. This TV has been terrible since the first day. I can't reset it because the power button and the input button on the side have never worked properly and the remote we use to change to AV and HDMI isn't working for some reason and never turns on te TV. We usually have to turn on our TV with the DirecTV remote. The RGB mode has a blue screen that says "no signal" in yellow text at the top of the screen and turns off after five seconds. It's impossible t


... Flat Panel Televisions

I have recently bought a sharp aquos lc 40 le811e tv set,im havin problems tuning it i have a new antenna installed and when i try and auto tune it says there is no signal,i have also tried 2 differant types of portable antenna made for digital tv and still nothin works,cos of this i have to continue using my digi box although the tv has built in freeview,also cos of this i cant use most of the features on the tv set,i have tried so many times to tune it but still nothing works,could u tell me w


Does it have a built in digital tuner? unplug wait 5 minutes hold power button while you plug it in you should get into a secret menu usd by techs look and see if you have a digital tuner hope that way works for that set ... Sharp Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1502 seconds