Having problems with your Flat Panel Televisions ?

This unit is practically brand new, has no dust nor dings nor damage on the unit anywhere, not even a scratch, but I haven't been able to get the unit to power on. Power cord is connected. The switch on the unit sounds like the others when pressed and everything looks and smells good inside and out! There are no cracks on the circuit boards, no broken wiring no broken or missing or out of place connectors. The fuse is also intact and appears good, but I haven't used a meter yet to check for



Answers :

Hi jesseley,\015\012
\015\012Do it has a led light when you plug the unit to the outlet, make sure that the outlet is live, what happen when you pressed the power on switch in the front panel?\015\012
\015\012Jdvillanueva

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

This unit is practically brand new, has no dust nor dings nor damage on the unit anywhere, not even a scratch, but I haven't been able to get the unit to power on. Power cord is connected. The switch on the unit sounds like the others when pressed and everything looks and smells good inside and out! There are no cracks on the circuit boards, no broken wiring no broken or missing or out of place connectors. The fuse is also intact and appears good, but I haven't used a meter yet to check for


Hi jesseley,\015\012\015\012Do it has a led light when you plug the unit to the outlet, make sure that the outlet is live, what happen when you pressed the power on switch in the front panel?\015\012\015\012Jdvillanueva ... Flat Panel Televisions

I have a sharp lc-62c42u that was bought in 2008. Last week i was watching it and the screen went black but i have sound. I took the tv to united radio and they told me a hour later it was no good. a circuit board went and to expansive to replace.. this whole thing is no making sense to me.. HELP please


TV Parts Universal TV Stands DLP Chips ShopJimmy You can get the parts here and fix it your self. Look at the T con boards for your model. ... Sharp AQUOS LC-62C42U 42" LCD TV

M160I Steam Shower Unit. Just installing and tv won't come on. Checked connections and electricity all properly connected and electricity running through. Also on display board inside unit after turning to radio selection on. After few minutes of radio playing a "radio" icon starts flashing on display board. Then everything freezes up. Display board controller doesn't work, remotes do not work. Have to shut of circuit breaker at main to shut entire unit down then switch circuit breaker back on.


... Flat Panel Televisions

Started out as no pic but still had sound - expert told me to replace z sus board which i purchased and did! now there is no pic and it makes a popping sound when turning it on to test it! Took tv to repair shop and now they are saying y sus board no good and poss z sus no good also! This unit has maybe been used a total of two years since purchase. Can you help clarify which board? Or verify if it would be 2 boards?


The y and z sustainer are always suggested to be replaced at the sametime as they work together to power the frontlight to the screen. sounds like the z board you got my be faulty with the popping noises, try to distriguish where the popping is comin ... Flat Panel Televisions

Hello. My tv will not turn on. I metered the power circuit as far as I could, and it looks ok. The fuse on the control board is good. The power switch meters good. When the tv failed I heard a small popping sound, but did not smell any smoke from a damaged component. I cannot tell if the problem is with the control board, or with the picture tube. Thanks


It sounds that the power supply regulator section or main board has the fault. Check it with the help of schematics. If you are not handy, seek any technician's support. ... Emerson EWF2006 TV

I have the P42840-05 chassis not the P42840-00. Its almost the same. Sanyo LCD DP42840 -P42840-05 Power Failure Circuit IC5500 coming off pin D9-D1668 is 4v. This 12v line is only 4v at power on which is the audio circuit. The other lines are good. This audio circuit is in both the analog & digital boards & connected by pins. Wondering if I have to replace both or not. Thanks


... Sanyo Flat Panel Televisions

Mitsubishi 65 inch rear projector TV with remote. Model WS65807. HD ready, but not HD. Has failed circuit board, part number 930B866001. This board regulates audio and video. Part no longer available from Mitsubishi. Conn's refuses to service it. TV otherwise in good shape. Is it worth the trouble of finding a replacement board?


... Mitsubishi WS-65807 65" Rear Projection Television

Hi, i bought a KV-HP212M83 4 years back. 1 year back, due to some over voltage in the line,the circuit board burnt away.since then we have been searching for its board and didnt get anywhere.its really sad that such a cool and good TV sitting idle at home ! It would be so kind of you to help us find the board of our TV and make it functional again.Patiently waiting for your reply. regards Anees Kurikkal +919946816899


Call Union Electronics at 1 800 648 6657. Be sure you have your TV model# and the board you are looking for. The other place is Andrews Electronics at 1 800 274 4666. These are professional services. I have used these services to replace boards, that ... Sony Standard (CRT) Televisions

Samsung LN40B540P8FXZA. There is a Black screen when the power is turned on. I replaced 2 circuit boards but still no luck. Should I replace the capacitors in the power supply? The ribbons between the boards? I was given this broken TV and was told if I could fix it I could keep it....any suggestions?


... Flat Panel Televisions

No lights and wont turn on. cord is good. 120v all the way through into the circuit board


The main switching power supply section circuit [SMPS] is faulty. Check and replace it. ... Philips 42FD9954 42 in. Plasma HDTV

Had a thunder storm last night. My tv was off, however after the storm I tried to turn it on and nothing! The outlet is good, I have my direct tv box plugged into the same outlet and it has power. I looked but I don't see any sort of circuit reset on this unit. I've only had it for a few months. Anything I can do?


Sounds like the power supply is the problem, it could be as simple as a fuse. ... JVC LT32A210 LCD TV

Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,


Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ... Vizio VT470M 47 in. TV

Hi I have a Samsung LE40S67BDX/XXE, Version AM02. When i try to start it up is it a relay how go on and off. REL 801 ( I work with repairing other electronic equipment, so I'm family with electronic) When I look at the circuit board it look that the capacitor CM809, CM807, CM811, CM 812 are little big at the top. Have you any idea if it only this or if it are more components how are broken? The TV start up sometimes.


If the tv starts sometimes, it is a power supply problem caused by bad capacitors that commonly bulge, change all the capacitors you mentioned because any capacitor that shows that condition is probably open or very close to it, and make sure they ar ... Flat Panel Televisions

I have ilo plasma display, model number: P42BSMT. When I turn it on colorful bars show up and I can hear the audio. I opened up the tv and noticed that one of the square black chip had some little burn holes so I took it out, so when I turned on the tv half of the showed picture. Where can I get a replacement for this circuit board that is no good?


... Flat Panel Televisions

Polaroid tv model 2700 FLM-2632 no sound. Good picture. Is it a circuit board or something else? Thanks Ken Boice


... Flat Panel Televisions

I have a Telefunken TTV-3426 87cm CRT Television which had a cracked Line Output Transformer and was Arcing to a Heatsink on the Circuit Board. Eventually the TV stopped working. I replaced the Line Output Transformer but the television is still not working. I am now looking for a schematic/circuit diagram for this TV or advice on what else could have been damaged. Thank you and Best Regards


... Flat Panel Televisions

50PF9631D I have this tv and when I turn these lights up the red power led and nothing happens ... I've also been looking for a broken elko visually but found nothing. I also tried the circuit board with a hair dryer to warm up but it did nothing please help me


Red light only? Does set have sound or nothing except power light? ... Philips 50PF9631D 50 in. HD-Ready Plasma Television

Chiller unit for cold room... Circuit board IC damage... System manufactor is uniblock zanotti model number Mas135T17G... Is it possible to fix


... Projection Televisions

Hi, Im working as a electronic technician in a garment factory.i have JUKI 1900 bar tack machine There's a fault in main circuit board. When I press the ready button, pressure foot goes up for a while n Itz comin to down position.acording to the my knwlage holding current of pressure foot solonoid is too low. I changed the power transistor but the problem still same.I change the the circuit board and itz working porperly with new circuit board.pls help me to repair the old circuit board


If your problem is solve then ok otherwise call me 9915100566 kamali try to help you ... Flat Panel Televisions

Cable connection broke off while unscrewing the cable. I removed the back and found a green circuit board. I am not sure what the circuit board part number is. My guess is 8KT00501A0, but there are several numbers on the circuit board.


Carry that piece to the retailer, he might be able to identify. ... Dynex DX-L26-10A 26 in. HD-Ready LCD TV

I have a Philips projection TV model # 60PP920217F. The TV comes on but there is no picture. I recently changed the coolant in it and spilled a little on the circuit board. ( It was unplugged at the time.) I tried cleaning it off with contact cleaner. I think I may have fried the board because I may have swapped the leads coming from the CRT boards going to the main circuit board. When I plugged it up and turned it on, it smelled like something was burning. I immediately unplugged it once that h


The crt fluid needs to be repalced carefully and correctly...This is why we created step byt step instructions for our kits on our website www.TvRepairKits.com . In msot cases if you cleaned up the spill before powering up the tv would be fine....bu ... Philips 60PP9202 60" Rear Projection HDTV-Ready Television

M228WDP-BZ - Pure white screen. Power supply board checked. Voltages through connector to main circuit board OK. Changed main circuit board without any improvement. Need to know the voltges that should be found at the connectors from the power supply board to the screen?


... LG 42LC7D-UB Television

Looking for circuit diagram of convergence board for resistor ratings


... JVC AV-48WP74 48" Rear Projection HDTV-Ready Television

Need to know how to test power circuit board on a Vizio VX32L. Like what points I can check with a multimeter. TV has power but does not turn on. Trying to find exactly where on the circuit board I'm losing power. Pictures explaining where on board greatly appreciated.


... Vizio VW32L 32 in. LCD HDTV

The HDMI plug is bad on my KDF-E50A10 can I replace it on the circuit board?


... Sony KDF-E50A10 50 in. LCD HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0839 seconds