Having problems with your Flat Panel Televisions ?

Hello, I have a CyberHome 300 dvd player. The unit was brand new and playing dvds perfectly. I decided to go through some older VCDs (mostly 2.0) that I had and it played the first one fine for a few minutes. So I put in another and it played for a bit and the image suddenly stuck/frozen. I've tried ejecting and powering off/unpluging the unit several times and all I get now is the "Bad Disc" message. Even with regular dvds. Not sure what to do now.... It's like the lenses or opti



Answers :

U could have damage the laser eye data reader,because u tries old VCDs with a different version of device data informations disc.Tries device unplug,replug the device back like an hour later for the thing for resetting itself back to the factory setting.Device it might be work probally again,if still the same problems.It is a new unit wright?Take it back where u bought it for a replacement unit.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Hello, I have a CyberHome 300 dvd player. The unit was brand new and playing dvds perfectly. I decided to go through some older VCDs (mostly 2.0) that I had and it played the first one fine for a few minutes. So I put in another and it played for a bit and the image suddenly stuck/frozen. I've tried ejecting and powering off/unpluging the unit several times and all I get now is the "Bad Disc" message. Even with regular dvds. Not sure what to do now.... It's like the lenses or opti


U could have damage the laser eye data reader,because u tries old VCDs with a different version of device data informations disc.Tries device unplug,replug the device back like an hour later for the thing for resetting itself back to the factory sett ... Flat Panel Televisions

I have just re-installed my pdp5071 after it being in storage for a few years.. the unit will not power up . at plug-in several clicks at upper left rear of unit ( click - stand by red light on-off, pause then click blue power light on, click blue power light out, pause click, click ) unit then is dead .. i have tried the unplug reset operation several hundered times same result. i have tried the mechanical power button a few hunderd times - randomely at plug-in i get a single click and red stan


There are two power buttons on this TV. One on the lower left front and one on the right side. make sure they are both on. During storage it may have deactivated both of them. ... Pioneer PDP-5071HD 50 in. Plasma HDTV

Magnavox 32MD350B/F7 32-Inch 720p LCD HDTV with Built in DVD player. Ejects any and all CD/DVD's. I've tried several different CDs and DVD's to make sure it wasn't the disk. I have also tried powering the unit down(uplugging) for several hours. No luck. Any thoughts?


... Flat Panel Televisions

I have a Panasonic TH50PZ77U plasma. (1) recently the unit would power off, without warning. (2) The power light blinked several times two nights ago, but finally came on. (3) Last night, no power light on the front of the unit, and it will not turn on. The unit is plugged into a surge protector and all other components plugged in are operating correctly. I have read through several forums on similar Panasonic models, and a "power supply" failure seems to be way to common.


Its probably the main filter capacitor thats gone on the power supply, (sorry for mentioning power supply again but it is actually a power supply problem) If you are good at soldering then you can replace yourself, Google Panasonic capacitors and th ... Panasonic TH-50PZ77U 50" Class Plasma HDTV

Power went out while VHS video was playing. Unit will power on, but will not play or eject.


Going to have it opened up---likely the tape was loaded and got wrapped up on something inside the mechanism. ... Combination Televisions

When power supply to TV exceeds 224V the TV switch off. It then tries to switch "on" again and will do so until the power supply to TV is lower than 224V. I ran a AC DC regulater to keep power output to TV as close to 220V. Then TV plays perfect. Aventually I unplug TV and go to bed. I have tried UPS's as well. Same problem. I think power supply unit in TV is damaged due to power surges. I replaced this 2 year old TV with a new one. Costly excercise. I still belive this TV can be fixed.


If a power supply is what you want, they are available all over the world, just use the internet like you did tonight and use Google, type in your tv make and model and power supply and you will find them. Parts are really hard to come by now the Qua ... Flat Panel Televisions

I have just bought the Panasonic DMR-EX99VEBK 250GB HDD DVD/VHS Recorder with Freeview+ and when I try to set it up , it doesn't seem to communicate with the television Additionally the unit screen displays please wait. After several minutes the screen displays HDDERR and the dvd tray opens I have tried this several times and there is no evidence of auto setup Hope you can help


... Panasonic Flat Panel Televisions

Hl72a650 Hi I have a Samsung hl72a650. Replaced lamp a year ago. Tv suddenly one day started to shut itself off and back on again. I have tried everything else I have researched online. Took lamp out and back in several times. When the tv comes on the picture is very bright and clear then suddenly the picture begins to loose color and shuts off and back on several times untill all 3 lights start blinking. I also started the tv with mute 182 power and selected options clear lamp, reset user setti


Color wheel issues replace light engine ... Projection Televisions

Magnavox 32MD350B/F7 32-Inch 720p LCD HDTV with Built in DVD player. Purchased in November 2010. Just developed a problem in that the set is ejecting any and all DVD's that I insert. They go in for a moment, it looks like it's loading, but then ejects. I tried numerous DVD's to make sure it wasn't the DVD, also tried powering down for several hours. No luck. Any thoughts?


... Flat Panel Televisions

I tried to connect my laptop to my tv using a cable and it worked several times but my laptop shut off after each attempt. 2 hours later i try again, i press the power button on the tv and the power l


An HDMI cable is best ... Flat Panel Televisions

My screen won't come on, however the blue light does come on to show it has power. Sometimes the screen just stays black, other times it seems like it's going to turn on but doesn't, meaning the screen lightens a little but it never fully comes on. This happens intermittently; when I unplug the power source for a small amount of time it sometimes fixes the problem and the screen comes on, however it often takes several tries. Periodically it just comes on right away. Also the remote frequently s


Mi tv no tiene imagen ni aparese el menud esta blanca sonido tiene y se escucha bien. ... Element Electronics FLX-2610 26 in. LCD HDTV

I have a Trutech 7'' lcd space-saving kitchen tv and dvd. The radio and dvd work fine but the tv doesn't work. When I turn it on I get a blue screen with the channel 2 in the top right corner. I have tried to reset the unit and autoprogram. I have lost my instructions to this and don't know if I am missing something. Although we have had this unit for several years, this is the first time we have tried hooking up the tv.


... TruTech PVS31170S1W 17 in. LCD Television

Panasonic PT-47WX53 47 in. Rear Projection HDTV Television and the power will not turn on it just worked last night. I left it unplugged for an hour and tried to turn it back on and it stayed on for a minut and then turned off and the power light blinks several times like a code or something. Is this tv saveable i don't mind trying to fix it because it has been a great tv but just don't went to spend a lot on a old tv. Any help would be appreciated, thanks


... Panasonic PT-47WX53 47" Rear Projection HDTV

I have a sharp aquos lc-c5277un. Both the power and OPC lights together blink twice. I tried unplugging it, holding down the volume up and channel down buttons while plugging it in. That left me with a solid power light on. I pushed the power button to turn it off and it turned off. Pushed it again to turn it on. It turned on and worked. 10 minutes or so later I heard a pop sound and the lights started blinking as before. This loop has played out three times. Is this the power board or


... Flat Panel Televisions

I have a Sylvania LC195SLX TV that when I try to power on the "power on" light (green light) flashes several times and then the tv just goes back to the "stand by" light (red light). The tv will not power on. Any ideas what this could be and if the tv is worth repairing? The tv is less than a year old, but I cannot find the purchase receipt for a free replacement from Sylvania.


The power supply is down . Sylvania power is very simple went you take the back off you should see the two bad capsitators on the board.Just replace them with same value . ... Funai LC195SLX 19 in LCD TV

Hello i have an element 37'' tv and i have to unplug the tv several times just for it to turn on. There is a steady red standby light on but when you try to hit the power button it doesnt respond via remote or on the tv panel itself. The only way it will turn on is from a constant plug and unplug of the power cord. Please help?


There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.If you ... Element Flat Panel Televisions

TX-p42GT50B I bought this TV just last week and after working fine for about 5 days. I went to turn the TV on to play some xbox 360 this sunday evening and all of a sudden I heard several crackling pop sounds. I jumped in shock and the TV started power cycling on and of and would not get past the smart viera logo before turning back off then on again. Most of the time the TV power cycles as soon as you turn it on. When it does come on, I am unable to change channel, change to the av/hdmi s


... Panasonic Viera TH-42PZ80U Plasma TV

My LG 60PG60F went to brief static and shut off. Won't turn back on. Oddly, when I tried to start it again several times right after the casualty, the power light flashed blue and couple of time


... LG Flat Panel Televisions

TV: Aquos SHARP LC-42BT10U When you plug the unit in, the power light comes on. After a few seconds, you then hear a click. Next, the power and the OCR lights blink simultaneously twice and then the OCR light blinks 3 times. When I put the TV in service mode, The screen gives me a small multi colored band from left to right that will fade after a few minutes. If I turn off the TV and put it back into service mode again, the color band moves to a different place. I am trying to fi


... Sharp LC-42D72U Television

The picture flashed green to black several times and the image went askew. Then everything went black and stayed that way. Sound remained on. After a few minutes, I tried to turn the unit back on and it did the white up and down lights ending with the two top lights on (now red). I have changed bulbs twice before when this happened and that fixed it. This time it didn't. One new thing that happens now (I know this is weird) is that when I turn it on the set chirps in the vicinity of the bu


Hi lc99527,\015\012\015\012This is an indication of faulty ballast board and or its power supply(gone to out-of-regulation) and once sense by the feedback circuitry it will automatically shuts off the power supply. First check for bad solder jo ... LG 62SX4D 62" Television

The make of the tv DVD combo is tosumi tom1024. I try to play DVDs. It reads the DVD 3 times then ejects the DVD. I have tried loads of DVDs.


You may be inserting the DVD the wrong way - try flipping it over so that the label is facing you. Failing that, you may have to set the region that your DVD's are from in the Menu.Is this a new TV? Have you played DVD's on it before? ... Flat Panel Televisions

Doesn't power up. Relay clicks several times, several seconds apart. After third click, power LED blinks three times. The OPC LED blinks once when the power LED blinks the first time. LED blinking pattern repeats every couple of seconds. Opened up TV to check capacitors. All look good. Purchased service manual, but there weren't troubleshooting steps for the power board. Any suggestions as to which board should be replaced first?


First of all you should weight the cost benefit of repairing the set versus purchasing a new one.\015\012\015\012Depending on the size and model of tv, it may be more prudent to simply cut your losses and buy a new tv rather than spend mo ... Sharp Flat Panel Televisions

I have a Mitsubishi WS-55909 projection TV. There was a power outage and when the power came back on, the TV won.t turn back on again. There is this light (Timer) that keeps on blinking on the front panel of the TV. I tried unplugging the Unit and waited for about 15 to 20 minutes before turning it back on , still won't work. I tried using the original remote for the TV to try to turn the power on, still doesn't work. There is a reset button beside the timer light, and I tried to reset the unit


Unplug,replug the tv back like 24 hrs later.That the whole tv is resetting itself everythings.Tv now should be working again.If still have the same problems,than ur tv DM power supply board is have dying parts,must repair the tv DM power supply board ... Mitsubishi Projection Televisions

I have a Sharp Aquos TV that started to turn on but shut off automatically. Tried it several times and it kept doing the same thing. Now the tv won't even turn on and the power light on the tv keeps blinking on and off. Please help.


It sounds like a bad capacitor. If you are handy, you can search on Youtube on how to replace them on your model. If not, have a proffesional look at it. The individual parts should be inexpensive. The service charge varies. Good luck! ... Sharp Flat Panel Televisions

When first turned on, power cut off then on several times until "warmed up". Tv about three years old and this just started. Tried unplugging and resetting it.


This is not usually an indication of a setting problem, rather a connection problem. While relatively rare, poor solder connections inside the set can cause this behavior. If you have experience with soldering, carefully open up the unit and look f ... Philips Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1347 seconds