Having problems with your Flat Panel Televisions ?

I can't get a signal between my Sony Blu-Ray Disc/DVD Player and Samsung HDTV monitor. They are connected via a HDMI cable. A brief message on the HDTV reads "Not supported".



Answers :

First, try to reset resolution of HDMI Sony BD output.
\015\012Unplug HDMI cable from TV and change to Component connection to reset BD output resolution.
\015\012Than after you entered to resolution menu, choose to standart resolution 720 or 480 i.
\015\012If above methode working, try to reconect HDMI cable again to HD TV.
\015\012If any problem with picture or still "Not Supported" messege appear, i suggest to change HDMI cable first.
\015\012i hope its work.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I can't get a signal between my Sony Blu-Ray Disc/DVD Player and Samsung HDTV monitor. They are connected via a HDMI cable. A brief message on the HDTV reads "Not supported".


First, try to reset resolution of HDMI Sony BD output.\015\012Unplug HDMI cable from TV and change to Component connection to reset BD output resolution.\015\012Than after you entered to resolution menu, choose to standart resolution 720 ... Flat Panel Televisions

I have a technisat hdfv desk top box. I have been trying to connect in via the hdmi connection. I keep getting the message mode not supported. It works fine via the scart connection. I have tried changing the hdmi cable but still get the same message. I know the hdmi connection on the tv is ok as I can run a blue ray from it. Took it back to the dealer they tried and got same message. They thought it could be a fault with hdmi on the box. The unit was exchanged. Tried again but still get the sam


You might want to see if a firmware upgrade exists for this issue in the Samsung set you have. ... Samsung Flat Panel Televisions

Just bought an new 40'' Dynex. When I plug my HDMI cable on my TV and the Rogers box I get the following message. HDTV does not support HDCP. Please use the YOrPb component connection to watch TV. Wha


... Dynex DX-40L260A12

My LG 60PZ550 Plasma HDTV turns on sporadically when connected to my U-Verse STB via HDMI cable. This does NOT occur when the STB is either disconnected from the panel, or when connected to the panel with component video cables. No other HDMI device (ie: Blu-Ray player, DVD player, HTiB) seems to exhibit this issue with the panel, only the U-Verse STB. Any suggestions?


Reset the uverse box. try resolution output settings from box. reseat the hdmi with tv and box. ... Flat Panel Televisions

I have a Hitachi 42PD7200 plasma tv. The hdmi port works with the new xbox 360, satellite tv and until recently my Samsung bluray player. When the bluray is connected (via a 4 port HDMI switcher of directly to the TV) it shows the bluray starting up with the Samsung logo and then gives the message invalid frequency. At this point the picture and normally sound are lost. I have connected the bluray to another TV using HDMI, the same cables and it works fine. Has anyone come across this problem


... Hitachi 42PD7200 42 in. HD-Ready Plasma Television

I have the soyo 37inch Soyo MT-SYTPT3727AB LCD HDTV when i connect it VIA HDMI to cable box the sound is lagging - how to fix it?


... Soyo MT-SYTPT3718AB 37 in. LCD Television

LG 37LC2D-EC My Tv has suddenly started to flick between a black screen and picture after it has been on for approx an hour. I have also had a message of "This display does not support HDCP". Does anyone have any idea whats happened? The HDMI cable port is connected to Sky+HD box and I have eliminated fault of HDMI cable as it works perfectly on another TV. I have eliminated Sky+HD box as it works perfectly on another TV. Could an over air/sky/playstation update have messed up the TV?


It sounds like the TV is having sync issues with your Sky+HD box. HDCP is the "High-bandwidth Digital Content Protection" that is used between components. It requires a sync between the devices to ensure that you are not trying to "steal" the video ... LG 37LC2D Television

Hdmi port When I connect something to the TV via HDMI nothing happens. My computer notifies me that I am connected to the TV but the TV does not read the computer or display any type of picture. Same with my cable box.


... Panasonic TCP42C2 42 in TV

Issues with LG 26LE5300 26 in HDTV LCD TV Both audio & video flicker off & on when connected to PC via an HDMI cable. No problem when in TV or AV (DVD) modes. PS. worked fine on Day 1, did not use HDMI on Day 2; problem arose morning of Day 3. I've tried the other two HDMI ports to no avail. I've disconnected and reconnected HDMI at PC. I've rebooted both TV and PC.,


I tried this.. and it works perfect for the video.. but there is no audio.Is there any specific setting to be made in TV or my laptop?I have Dell laptop with Win7, because I dont see any option to enable audio.. ... LG 26LE5300 26 in. LCD HDTV

When connecting my Cable box through an Onkyo SR 705 Receiver and then through a Samsung DLP HDTV HL67A750... I first get a message "The HD Protection of your Repeater has been compromised. All of the devices connected will not be authorized to receive video signals." The the picture on my Samsung TV turns green. I spoke to Onkyo Support, and they said that the adapter is not HDCP compliant... and therefore will not work with the Onkyo SR 705. Any thoughts of how to solve the problem


... Flat Panel Televisions

The tv is hooked up with hdmi cables. The alert says "your HDTV does nor support HDCP. Please disconnect the hdmi commector and use the YPrPb connection to continue watching tv. It worked fine and nothing has been change prior to this warning


... Mitsubishi WD-73827 73" HDTV DLP TV

I connected my 32" Funai LCD TV to PC CPU with VGA cable. I could watch the movie once. However, not able to get the connection again. TV gives message "Not Support". Do i have to change the settings somwhere in the computer or TV? After connecting the VGA cable when i start PC, i get display on TV up to "starting Windows" but TV goes blank after that with "No support" message. Pl help.


... Funai Flat Panel Televisions

My problem is getting a "This signal is not supported message" on an HDMI input into a Pioneer PDPR05G media receiver.


... Pioneer Flat Panel Televisions

Dears, I have LCD AL46N8, I want to connect it through the HDMI cable with new Humax satalite receiver, Im not able to do that, message stating is not supported, can you solve this matter?


... Samsung LA46M81BDX 46 in. LCD TV

When I connect my PC to the HDTV with an HDMI cable I get a not compatible message.


You have answered your own question. ... Samsung LN40C530 40 Series 5 LCD 1080p HDTV 60Hz

I get no picture from my vizio vbr121, it is connected to my hdtv via a hdmi cable


... Flat Panel Televisions

When I try to connect my Dynex TV to my Asus laptop via a VGA cable, I get a Not Supported message


... Flat Panel Televisions

I have a 32 inch RCA LCD HDTV and when I connected a High-Def set-top box to the TV via HDMI cables, I got perfect picture, but no sound....


... Flat Panel Televisions

Hdcp compliant vizio 55" - now recieves message stating set op hdmi port requires hdcp compatible tv input. switch to a compatible input or do not use set top hdmi port. If TV input supports HDCP then the hdmi cable may be at fault. Purchased new HDMI cable tried on all 3 hdmi input ports. No success. How do i correct this problem?


... Vizio Flat Panel Televisions

Phillips 32 inch lcd model 32pfl3504d/f7 when i hook up my phillips dvp3982 dvd player with a hdmi cable, ports 1 and 3 do nothing. port 2 gives an screen message that says "format not supported" the composite video cables work fine, but the picture quality sucks. i have tried 2 different hdmi cables, so i do not think that is the issue. please, HELP ! ! !


... Philips 32PFL3504D 32 in. LCD TV

I have a Polaroid TV model FLM-2601, it shows HDTV on the front and I recently upgraded my Cable to HD Service. I have the HDMI cable and see the connection on the Cable Box, however, I can not locate a connection on my TV. Is there some sort of adaptor that I need?


Unfortunatly Poleroid is a very economic set and Since there is no built-in ASTC tuner you will have to connect HD sources via the component or DVI jacks. You will ned a plug that is HDMI to component or DVI to get your service. ... Flat Panel Televisions

I have a panasonic Th-42pv500a. I'm trying to connect my ps3 Via HDMI but it won't work. The ps3 works in my other tv with the same HDMI cable. And the foxtel box works in the panasonic with the same HDMI cable. Please help!


The playstation detects that you are changing display settings. hopefully you still have the old red yellow and white cord that we all used to use to plug in stuff to your tv . use this cord to connect your playstation to the tv, it should pop up th ... Flat Panel Televisions

Sansui(Model HDLCD4650) will not detect phillips or toshiba blu-ray player connected via HDMI. I connected a laptop through same HDMI 2 port, same cable, and HDMI 2 input selected & it worked fine but when i try the bluray players, they don't get detected. No bluray home screen is seen. Help!


... Flat Panel Televisions

TH-50PX77U inputs Only the coax and audio visual cable inputs work. the composite and hdmi inputs do not produce an image. the menu, and av cables are all in perfect picture, but nothing shows up when connected via hdmi or composite cables. thoughts?


Many times a computer's post screens will not show up a TV set, and once the computer itself has loaded the drivers and settings, the set may need to be shut off and turned back on for the HDNI or PC signal to be detected.It is also possible ... Panasonic Viera TH-42PZ80U Plasma TV

DVD player not working via HDMI cable to my samsung TV


... Samsung PS-42C7HD 42 in. HD-Ready Plasma Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1122 seconds