Having problems with your Flat Panel Televisions ?

The on-screen clock on my sony bravia kdl40w5500 lcd TV (lower RH screen) has disappeared. My problem is that I usually watch TV thru a Topfield TRF7160 PVR and I don't know whether the clock is controlled by the TV or PVR! Despite searching both manuals, I cannot seem to find the solution. This senior technophobe would appreciate advice. Thank you.



Answers :

Http://www.topfield.co.kr/include/download.asp?dn_dir=1&fname=TRF%2D7160%5FEng%5F09Aug2010%2Epdf

Page 28...on screen display for the clock



Under Front Display make sure it isn't "disabled"

Under sub display you will find the clock and persistence option

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

The on-screen clock on my sony bravia kdl40w5500 lcd TV (lower RH screen) has disappeared. My problem is that I usually watch TV thru a Topfield TRF7160 PVR and I don't know whether the clock is controlled by the TV or PVR! Despite searching both manuals, I cannot seem to find the solution. This senior technophobe would appreciate advice. Thank you.


Http://www.topfield.co.kr/include/download.asp?dn_dir=1&fname=TRF%2D7160%5FEng%5F09Aug2010%2Epdf Page 28...on screen display for the clockUnder Front Display make sure it isn't "disabled" Under sub disp ... Flat Panel Televisions

Remote sensor on tv not responding I,have to turn on tv manually. change input manually,tv reception is ok. Volume cannot be controlled,it will lock in at full volume or drift back & forth,mostley full volume. If I use volume buttons on tv , it changes input (video 1 pc hdmi & so on) Once in a while setup screen will appear then disappear. I have changed batteries in the remote, I don't believe this is the problem.When tv is first turned on the volume icon at bottom off screen will go from 0-60


Have you checked your remote to see if its working? If you have a digital camera or camera phone, point the remote at the lense and see if it shows up on camera screen. If it is working then the IR sensor on the tv could be bad. ... Sylvania LC420SS8 LCD TV

I have a Pioneer Pro-505PU with a PDP R04U receiver unit that handles the I/O and other functions, RF etc... I cannot seem to get a picture to the TV. It turns on but the controls on the side of the TV do not seem to work except the standby button, no inputs, nothing on the screen. Again, it turns on the screen is illuminated black. I believe the PDP "brain" unit is dead. I was going to attempt to 9pin serial port into the unit using windows XP hyperterminal. Thanks


... Pioneer PureVision PDP-5040HD 50 in. Plasma HDTV

I have a brand new Aquos 52" LED TV and I accidentally locked remote operation and THEN found out the front touch screen panel was broken. Any way to manually reset the TV or remote to gain access to on-screen menus? TV is literally bricked at the moment because I cannot use the front touch panel buttons and the remote simply displays a "remote control operation prohibited" alert on screen...


While the set is turned on, you need to hold the power button until the set shuts off and the led in the middle of the bottom flashes once. Then quickly release the power button and press the vol - and input buttons together ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

The remote control does not seem to work. WHen turned on manually the blue light on the front of the tv flashes for a long time. Seems as though its turning on and of, brief screen "flashes" no picture or anything just goes lighter then dark.


Hi ,\015\012\015\012This is an indication of out-of-regulation either in the voltage regulator circuitry and/or in the output of the chopper transformer. The very\015\012common caused of ... RCA 32F670T 32" TV

Hi, All functionsof my westpoint television are locked(lock symbol on screen) Cannot access the menu,sound etc. Set can only be switched on manually or via remote control


All sets with the lock feature have a way to unlock either with or without the remote--called a default code or method.Look first to the owner manual as it may be there, failing there contact the maker with the model number for assistance. ... Standard (CRT) Televisions

Westinghouse w3223 TV, the Video 5 HDMI 1 box stays on the screen flashing. The manual controls on the TV do not seem to work. If I hold the input button the Video 5 HDMI 1 box will go away


... Flat Panel Televisions

I have a Vizio VA370M. My problem is that the vizio's logo stays on screen and none button of the tv or the remote control responde, it seems to be a problem with the lcd controller because at first i noticed that the cable that goes to the screen was a little loose and then it works ok but now it does the same thing again. I also tried disconnect the power cord and wait for some time to reset the tv but it not seems to work. The image looks great but again...the logo is still on screen and t


... Vizio VA370M 37 in. TV

Sanyo led-lcd model 46xr10fh tv. have no remote control. touch controls will only active the screen. Cannot active any other controls by the use of screen touch . Do I have to have a remote to activat


... Flat Panel Televisions

Hello, my mother has an old Orion TV set (model P2135MT) and we lost the user manual. I'm trying to do a manual channel search, because the automated one does not get all channels (there are over 100 channels provided by the cable company and the auto search gives me the first 100). However, I seem not to be able to do manual search. Is this the truth? Many thanks.


Hello\015\012Hello\015\012Search in Google for:\015\012\015\012www.eserviceinfo.com/index.php?what=search2...orion+p21 ... Standard (CRT) Televisions

While re-setting the Display function it was accidently set for PAL viewing instead of NTSC. The image is now rolling vertically on the NTSC TV screen. Now, I cannot re-set the display functions because I cannot view the steps while the screen is unreadable. The manual does not supply a step-by-step link. Unplugging the player does not help. Inserting a standard NTSC DVD does not help. The menu cannot be viewed in order to clear it. Help!


Hi hrosenelp,\015\012\015\012There's no other way to get it back to NTSC mode but to access the set-up. Your digital camera will help you see it clearly. While in the set-up mode, take a picture of the screen(TV) for every command that you will ... Flat Panel Televisions

No matter which picture size I select, I cannot ever seem to get the picture from the DVD to fit the screen. For instance, I am watching a DVD right now that is in wide screen, and when in "Normal" size, the picture is sitting at the very bottom of the screen... and some of the picture is missing. However, if I change to other sizes, large parts of the picture are cut off. Is there any way to fix this? I have tried different things in the Menu... nothing seems to adjust where the picture sit


U tries used the DVD player remote to fix this problems,could be the DVD movie?Have the same problems,with the regular tv incomming broadcasting signal?Yes,than the tv Tuner signal board is the problems and the causes it dying and shorted.Tries websi ... Sansui SLED2280 22 in. LCD TV

Just got a fairly new Sylvania lc32ossx from a friend, however, the remote was misplaced during a move and the owners manual is also. With the buttons on the tv I can pretty much do all the set ups except changing screen size of picture. The picture only sits in the center of the tv. I want it to be on widescreen or to take take up entire tv screen but cannot find settings for this manually. Can this be done only with the remote?


... Sylvania LC320SSX 32 in. LCD TV

Set comes on with a blue screen with retrace lines,then shuts down. Turned down screen control on flyback, set stays on cannot control brill


The set is shutting down because the picture tube is been over driven, it is most likely the picture tube has a short in the blue gun, turning down the screen control drops the voltage to a safer level. The only other possibility is a short video dri ... Sony KV-32S40 32" TV

The tv menu screen keeps popping on and off when watching TV. Sometimes the sound volume control screen will appear but you cannot control the volume. The set is only 4 months old.


It should be under warranty still but if not and menu comes up on its own I would suspect a problem with the keyboard where the buttons are---they may look and feel fine but they usually are the cause of this kind of problem----In several cases I hav ... RCA 32" LED HDTV LED32B30RQ - ON Corp US, Inc

Screen looks green and there is no possibility to adjust color with the manual control. Tried changing Iris but to no avail . The screen was showing a blue " stain " but still the colors were acceptable before it went green screen. Screen flickers and red color tries to enter but it flickers again and goes green


Hello docstove!\015\012looks like it has some cooling liquid problem, please contact service for repair.\015\012regards ... Sony KDFE50A10 50" HDTV

LG LCD '42LG6' TV Remote control seems to be jammed - the TV button on the remote is lit up and won't turn off - now I can't seem to do anything - The actual TV can be turned on and off and we can change the channels manually - it's just the remote that seems to be jammed -any suggestions?


This only takes about a minute and will restart 1 in 3 "Dead" Original Remote Controls. \012\012\012\012\012\012 \012\012\012\012\012\012Step 1- Pull the batteries out ... LG 42LC2D 42 in. LCD HDTV

Tn61x81 My screen has a horizontal black arcing line across the top and bottom of he screen. The bottom is worse. It almost covers 1/2 the screen. I changed the convergence chips with no luck. I can tap on the side of the set and it works for about an hour, then it comes right back. Also, I have tried to get a service manual for this tv and cannot find one, any suggestions on how to fix this problem would be greatly appreciated.


... Toshiba TN61X81 61" Rear Projection Television

I am presently working on a Samsung HLN437W. The unit will turn on and all controls on the set or remote work, after a short while all the controls freeze up and do not work. The only way to turn off the unit is to pull the plug. Sometimes it seems to work properly but if you shut it off with the controls and leave it plug in after awhile you cannot turn it back on, you have to unplug it for awhile before plugging it back in. Peter Ache [email protected]


Ok, if this were me I would suggest a thermal issue, some component(s)? are heating up, and the system is then hanging up? This can be in one of many places, however the most likely candidate is the switched mode power supply, either this is, or it ... Samsung HLN437W 43" Rear Projection HDTV

I'm not sure of the model # but I have a 42" lg flat screen hdtv. Just recently the screen went blank. By blank I mean the tv is on, the power light says so, but the screen is a cloudy blue and the remote control will not function. I cannot shut off or turn it on with the remote and the channel do not work with the remote or directly on the console. It's like it just froze. Is this common? is there anything I am missing( reset button? a restart sequence?) Please help. This tv is only 4 yrs old


Well first 4 yaers old is sadly quite old these days.The first thing to do is to contact the LG support service. It might be difficult to find someone really competent on the phone, but if you do find one, they are usually helpfull. ... LG Flat Panel Televisions

Philips 26pfl5522d/05 turn the tv on, blue screen once warmed up and DIGITAL TV the only menu option that works from the remote is the volume bar. Cannot Factory Reset as cannot access menu. Turned on tried once on holding and releasing MENU (on TV control panel button) nothing. Cannot select HDMI source (cross in grey square displayed), the tv has locked me out!! Please Help


... Flat Panel Televisions

I have an emailair WS 066h. it wont start from the remote control. I have changed batteries, remote seems ok as display works. Is there a manual way of turning on unit?


... Projection Televisions

My picture is too big for the screen, you cannot see top of peoples heads or the very bottom part of the picture. It is like watching a movie that wasn' formated to fit your screen. I have tried to adjust it, but nothing. seems to make any difference!??


Change the aspect ratio on the set. If this does not work, change the aspect ratio on your cable or sat box. ... Vizio E320VL 32 in. HD Ready LCD TV

I have an LG32FS2ANB flat screen 32" hd ready tv and Would like to get an online manual for this tv or one similar. unfortunately, I need to re tune our stations in and cannot find my manual.


Hi There,I have the link that would help you Please go the the link below for the manual which can be downloaded either by paying approx $5 or by getting it for free after completing some surveys, Hope this helps. ... Flat Panel Televisions

I am using the tv in the RGB-PC input mode. The display picture is off set and I cannot find a control to walk the picture back into the screen like they have on regular moniters. Is there such a control?


It should have an auto adjust built into the set. If you are using it as a pc monitor, you need to make the adjustments yourself on the PC. ... LG 37LC7D 37 in. LCD HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1530 seconds