Having problems with your Flat Panel Televisions ?

Okay, so i plugged my xbox in and then i plug it into the tv, but no picture pops up at all, it says check cable signal, but i don't know what cable, and i tried hooking it up in the 1 component(under the 2 cmponent because there's only 2) can u tell me what "check signal cable is" or help me out please?



Answers :

What colour are the plugs on the lead you are using, if you have a component lead it will have a green a red and a blue plug if its composite you will have a red white and yellow plug

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Okay, so i plugged my xbox in and then i plug it into the tv, but no picture pops up at all, it says check cable signal, but i don't know what cable, and i tried hooking it up in the 1 component(under the 2 cmponent because there's only 2) can u tell me what "check signal cable is" or help me out please?


What colour are the plugs on the lead you are using, if you have a component lead it will have a green a red and a blue plug if its composite you will have a red white and yellow plug ... Flat Panel Televisions

I am tire of cable and want to use an antenna, I have hooked an antenna to the tv checked the hook up and it is secure, but am getting no signal...I have been trying to find a place to change from cable to tv via my remote but not haviing any luck...please help


After u hook up the antenna source like a digital or a roof antena to the tv.Used ur remote go into the tv menu.Goto SETUP,go down to CH.Pick AIR enter and scan for free air DTV channels. ... LG 32LG30 32 in. LCD HDTV

Dvd connection we have our direct tv cables hooked up correctly we believe, because we get the signal just fine. When hooking up the A/V cables from the DVD player to the other ports available however, it doesnt pick up the signal after we change the Source on the TV. So basically, everytime we want to watch a dvd, I have to unhook the direct tv a/v cables and hook up the dvd av cables in the same ports. It works just fine then. But we would love to not have to go thru that process everytime.


Check the connection wire for any internal conductor break. Check it with a multimeter. ... Sceptre X400BV-FHD 40 in. LCD TV

Am trying to hook a 32 Vizio TV about 4yr old to a samsung surround sound and to my Blue Ray. i have an optical cable and the HDMI, theres only sound coming thru the center spkear. i double check all the wires and everything is connect right . please help


Hi there,First of all, as a test, make sure the Samsung A/V receiver can output stereo audio from the tuner input (L+R), if it does, then it's just question of setting the receiver to the correct "mode", you should consult your owner's manual ... Vizio VX32L Television

My LG TV is detecting no signal when we hook it up to cable. An older analog TV hooked up to the same cable outlet does receive a signal. Ideas on what I am doing wrong?


... LG 42LB5D 42 in. LCD Television

Viewsonic n3290w-au Initially digital audio and video were out of synch, and epg was showing no information for all channels. Ran the auto tuner again and it won't find digital channels at all. Analogue is fine. Have checked cable from tv all the way back to antenna on roof, can't see any problems. What can I check next? Trying to get hold of another tv to check if signal from antenna is okay. Haven't tried a different fly lead, but if analogue reception is perfect then surely the cable is fi


... Flat Panel Televisions

Helo, I have problem with HDMI on SONY KDL 26U2000. I bought digital satelite complette with HDMI. I connected it to TV. But video and audio signall is sometimes shortly breaking. More times on HD programs. My service engiener checked cables - all are OK. He checked satelite signall - all are OK He checked satelite complete with another HD TV (Philips, LG, Samsung...) in his company. HDMI on satelite complette worked correctly. I would ask you about help. Thank


Sony's can be picky about HDMI.Check for software update that addresses HDMI issues.Contact Sony for software. ! 800 SONY USA ... Flat Panel Televisions

"I have a Haier L32f1120 TV, I purchased an hdmi adapter and cable yesterday to hook my Macbook Pro to the TV. It is hooked up correctly, but the TV is saying no signal when I'm in hdmi mode, I&


... Haier Flat Panel Televisions

Problem: Signal de-resolution with HDMI hooked up. Olevia 232-S12. I know this is a long shot with the Olevia being 4+ years old and now defunct.... but anyone familiar with pixelation with the HDMI port? It is very intermittent, but occasionally will cut out with white and colored pixels, with sound degradation. Thought it was my HDMI extension cable, but it happens now with my BluRay hooked up with a 4ft high quality cable. Anyway to just replace the HDMI port? Or do I need to replace t


... Syntax Olevia LT32HV 32 in. HD-Ready LCD Television

No Signal Watched a DVD, when we switched back to watch TV there was no picture and it said no signal. I tried another TV to make sure the problem was not the antenea or the cable. All checked out fine. It did this once before and we found all the stations were one point off, for example 10.1 was now 10.2. We manually restored all stations and all has been well until now. I have tried many things and I can not get a picture back. In diagnostics it says my signal strength is zero. Thank you, Greg


Have you checked on all inputs including the rear audio and video jacks? ... Sony KDF-50E2000 50" HDTV

Foxsat-HDR 100GB, 2Yrs. old. Problem--HDMI Feed to LG32LC2RR Television---Audio OK but NO Video--OSD--"No Signal" message. Check-- HDMI Feed from DVD Player-- Audio and Video--NO Problem. Check-- SCART Feed to Television NO Problem. Check-- Changed HDMI Cable--- NO Cure. Regards, Ray Parnell.


... Humax Flat Panel Televisions

Laptop is hooked up to TV via VGA cable and tv says no signal, why?


Try to change your source (hdmi,RCA, etc) then switch to VGA. ... Sharp LC22DV24U 22 in. LCD TV/DVD Combo

Check signal cable samsung


... Samsung Flat Panel Televisions

MESSAGE ON SCREEN SIGNAL CHECK CABLE AND ATTENA CONNECTION S


... Samsung Flat Panel Televisions

No picture Picture instantly gone when accidentally pressing two or more remote buttons simultaneously. Screen does display remote commands but there is no indication of a broadcast signal. TV is hooked up to cable. Cable service is normal on another set.


Tried to reset the tv. ... Standard (CRT) Televisions

My prizmo hd tv keeps telling me that there is no signal. I don't have cable or satellite and I've checked the antenna cable and it is working. Any suggestions?


... Flat Panel Televisions

Laptop interference When I open my laptop, my cable, plugged in to my TV, starts reacting with interference, sometimes completely turning to "no signal." When I close my laptop, there stops being interference issues. It doesn't matter whether my wireless internet is connected or not, I've checked the line in where the cable's connected and it's happens with predictable accuracy. Please help!


All laptops must meet certain requirements for interference---about all you can do is move the laptop further away and or see if another laptop has the same issue. ... Vizio L32 32 in. LCD HDTV

I have a receiver for 2 tv from dish . had a small tv hook up in bedroom and it worked fine. put new emerson flaT SCREEN IN AND HOOKED UP TO EXSISTING CABLE LINE AND ALL I GET IS NO SIGNAL


Make sure on correct input ... Emerson Flat Panel Televisions

My Durabrand dwt1304 was hooked up to cable. I now have relocated the TV into my workshop and am attempting to hook it up to a digital converter and an antenna. Turning the TV on, I am getting a "Helpful Hints" message on the screen that asks if I have performed an "AUTO PRESET CH". I found this on the remote's menu and ran it, after which the screen gets the message, "NO TV SIGNALS". At that point, I can get the TV to do nothing else. Trying to run through setup with the digital converter


I suggest to go back to the menu and make sure in the connection or signal type to select antenna.. Since you had it hooked up to cable it may not have been selected to go back to antenna. Hope this helps you out. ... Durabrand DWT1304 13" TV

Hi, my Phillips was hooked up and working fine directly to the DISH receiver using the HDMI 1. I moved and had to put the DISH receiver in another room and ran a coax cable to where the TV is now using the ANT in spot. I select TV as the source and choose channel 60 and no signal. I hooked up another TV and it works OK. Any ideas?


Hey, I'm Seth. I work as a sub contractor for dish network. I am picking up that your problems are on TV 2? If so, you will need to go into the menu on the TV itself and look for, "channel scan" or "auto memory". Run a scan. If there are no channe ... Philips 42PFL5332D 42 in. LCD Television

RCA l42fhd37yx8 connected computer with vga cable have picture for a few minutes then no usable signal message. Checked cable on another tv works fine.


... Flat Panel Televisions

My LG Flatron M2262D, about six months old, stopped working with the on screen message 'check signal cable'. I checked it by using it on another set, and it is perfect. Any ideas?


Check out the menu used to manage your inputs. It sounds like the TV is looking for an input in the wrong location. The signal may be coming in on HDMI port 1 for instance but the TV is monitoring and expecting the signal to be on HDMI port 2. ... Flat Panel Televisions

I just bought a Samsun Series 4+ / 440 / 450 (on the users manual lol) but when i try to hook up my DTV or PS3 using an AV cable, nothing shows up. In the Sources, it shows "AV" but when i select it, it says no signal. The AV cable is plugged into the channel 1 slot and it is on channel 1 when i switch to AV. Please help.


Is that the av channel? if so, how do you know your getting a signal from the ps3? try hooking the ps3 up to something else to make sure you have a signal coming out of that cable (this is where you have to start) if you have another device like a DV ... Samsung LN-T4053H 40 in. LCD Television

I can't gey my Toshiba 43HX70 TV to display a 10801 signal? I have checked and rechecked the componenet cables and i can only manage a 480P signal.


... Toshiba 43HX70 43" Rear Projection Television

On my LG TV RZ-37LZ31 I get a message saying check your signal cable RGB PC How do I check it?


... LG RZ-37LZ30 37 in. LCD Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0725 seconds