Having problems with your Flat Panel Televisions ?

MY GE TV MG19000 / CTC185A9,STUCK ON ONE CHANNEL AND UNABLE TO GET A CABLE SIGNAL TRY AUTO PROGRAM BUT IT GOES BACK TO THE SAME CHANNEL STUCK,NO SIGNAL PROBLEM



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

MY GE TV MG19000 / CTC185A9,STUCK ON ONE CHANNEL AND UNABLE TO GET A CABLE SIGNAL TRY AUTO PROGRAM BUT IT GOES BACK TO THE SAME CHANNEL STUCK,NO SIGNAL PROBLEM


... Flat Panel Televisions

Viewsonic n3290w-au Initially digital audio and video were out of synch, and epg was showing no information for all channels. Ran the auto tuner again and it won't find digital channels at all. Analogue is fine. Have checked cable from tv all the way back to antenna on roof, can't see any problems. What can I check next? Trying to get hold of another tv to check if signal from antenna is okay. Haven't tried a different fly lead, but if analogue reception is perfect then surely the cable is fi


... Flat Panel Televisions

I have lost channel 09 (UK) BBC4 a few times from the TV. I have tried to get it back using auto tune but the while all the other programs are retuned channel 9 is not and even on the information page there it goes from channel 8 to channel 10. Can you help me tune to BBC4 which is functioning on a second tv in the house. Thanks in advance for any help


Try autoprogramming at different times. signal may be better during the day than at night, and vice-versa. ... Sony BRAVIA KDL-32S2010 32 in. LCD Television

I have an LG 26LZ5RV TV. I have connected it from the RF output of my Sky+ box (using a coaxial cable) to the "Ant In" socket at the back of the TV. The RF output on the Sky box is set to Channel 35 and the power is on. I know that the output is working, as I have tested it on an old portable TV with manual tuning. My problem is that I cannot get my LG TV to tune in to the signal, using either auto or manual tuning. I have used System "I" and tried setting the Channel to 35 then searching b


... LG Flat Panel Televisions

Samsung HL85688W DLP TV. Turned on the TV .....channel came on, color is good and audio is fine. Changed channels and found it was only getting 3 channels. Tried changing "source" got black screen until I got back to the 3 channels. Unplugged TV for 50 minutes to let it reset ..........turned back on and have the same problem. What do I try next??


... Samsung DLP HL-P5663W 56" TV

No Signal Watched a DVD, when we switched back to watch TV there was no picture and it said no signal. I tried another TV to make sure the problem was not the antenea or the cable. All checked out fine. It did this once before and we found all the stations were one point off, for example 10.1 was now 10.2. We manually restored all stations and all has been well until now. I have tried many things and I can not get a picture back. In diagnostics it says my signal strength is zero. Thank you, Greg


Have you checked on all inputs including the rear audio and video jacks? ... Sony KDF-50E2000 50" HDTV

I have a RCA 55 inch projection hdtv and it wont come on!!! when i push the on button the lite comes on but no picture and no sound and then it goes back off... its then tries to power back on by itself and goes back off... It tries three times and then stops... what seems to be the problem?


... RCA D52W19 52" Rear Projection Television

I have a olevia 37 inch tv that when i turn it on and try to change the channel it goes mute. i tried turning the channel on the tv and same issue, goes mute. sometimes when i turn the tv off and back on it works and i can use the up and down channel buttons. what could be the issue?


... Flat Panel Televisions

I have a Samsung TV model LN40C530F and I have 2 problems with it. 1. Suddenly, the sound rises for a few minutes and it comes back at the initial level. It can happen several times during a program. 2 . Every time when I switch from HD channels into analogical channels, the picture moves to the right about 2 inches. I have to look out in the settings and make an image test so, the picture comes back central. I called Samsung customer service and they told me the problem was coming from the sign


This happens a lot. I would blame the tv itself. I've worked on samsungs with faulty CCFL lamps, faulty backlight inverters....faulty mainboards ETC. I believe this is a video signal issue going from digital to analog which corrilates with the tuner ... Samsung LN40C530 TV

Hi I have a Samsung LCD tv model ln26a330j1dxza the problem is that when I turn it on the screen looks black or freeze but if I move the tv in different direction the image goes back to normal but when I try to move it back the image goes black or freeze I already open the tv and the capacitors looks good so I have no clue what is the problem


... Flat Panel Televisions

Im trying to program channels ad it only programs 2 channels and now won't go back to the channel program feature. it skips over it


... Sharp LC-26SB14U 26 in. LCD TV

My Sanyo AVL 209 t.v. is only working on one channel. It shows the channel at the top but if I try to chage it stays on the same channel but goes fuzzy. This all started with a broken remote. I am now ttrying to do in by the t.v buttons. I think Source is the problem. I put t.v. as the source but think I have the wrong input. How do I change it. I am connected to a HD box and am totally confused. I have tried unplugging for an hour. No luck . Unable to change to another channel.


... Sanyo AVL-209 LCD TV monitor power supply ac adapter cord charger

We are having problems getting channel 3 on our Olevia television. We have Dish, and chatted with them and they suggested that it was the # 3 channel and 4 were not programed in. I tried to call Olevia and they are no more. Do you have a suggestion on how we might program # 3 channel and # 4. Thank you. Marya Mather


I cannot locate free user manual for your TV, what you need to do is to go into the TV Tuner setup menu and have the TV rescan for the TV signal, it should pick up the Ch3 or Ch4 signal from the Dish box (depend on what the Dish box RF output is set ... Syntax Olevia 527-S11 Television

BAUHN I purchased the above TV at Aldi,s Liverpool store in Sydney 10/04/2013. When I set up TV the Guide (EPG) was working fine. For some reason the Guide (EPG) has now stopped showing any programs and says No Event Information and the same message when display is selected on the remote for the program you are watching. The signal strength for all channels is showing 4 to 6 bars and the picture is fine, I have tried Auto Scan again and tuned in all Channels again but this made no difference. W


... Flat Panel Televisions

No signal The initial screen says No Signal and when I try to change channel the channel number displays 65535 followed by a line of yyyyy where you would normally see the program. The TV worked last night and this morning was turned on by a teenager - I am not sure if he has accidentally pushed a wrong button.


Locate the Reset button near to the power button.If you do not see go to the Menu scroll untill you see reset all things.God bless you ... Toshiba REGZA 42 in. Flat-Panel LCD HDTV

I am having problem setting up my hdmi connection with my panasonic viera model TH-L32C10X2. i cant get it connected to my sony ps3. all cable connections are connected. set the tv to either hdmi1 or hdmi2. then tried setting it up on the ps3 console. but when i tried to change the ps3 setting to hdmi setting, the picture goes blank. and after 30 seconds goes back to its original picture. please advice what to do. thanks


I do not own a PS/3, but I will try to help just in case you dont get another expert at this late hour....\015\012\015\012It sounds like you need to save the changes on your PS/3. It is timing out and going back to default because the cha ... Flat Panel Televisions

Samsung TV Have a Samsung LN32A450 TV that the other night switched from component 1 to channel 3. Channel 3 has snow and the message "weak or no signal" in the middle of screen. Tried resetting cable box which didn't work. Called cable provider and was told it was the TV not cable. Have 2 other TVs in house that are unaffected. Tried unplugging TV for 5 mins which corrects problem but for only 30 mins or so. Last night volume on remote stopped working,all other buttons on remote work,and vo


Based on the information you described you may have a tuner circuit problem or power intermitent faikure fron the power supply module. ... Samsung Flat Panel Televisions

Sony kd-36xs955 Turn tv on all channels fuzzy,once warmed up,everything is good.Now when you try to use the hdmi port for PS3 nothing there.The tv has had problems before like it would shut off and blink red lights.It was difficult to get it to come back on.Now it doesn't shut off anymore, but the above described problem still exist. I don't mind the blurry channels,but it won't alow me to use my PS3 anymore? Please help don't want to get rid of tv?


Count how many times the standby light blinks at one time. These blinking are fault indication. You can get an idea about the faulty circuit part inside, from these number of blinks. After make it sure, if you wish to get more details about Blinki ... Sony FD Trinitron KD-36XS955 36" TV

My technika digital tv/dvd has lost signal on the DTV.i have tried to reset it/retune the channels for the last hour and its doing nothing.ive turned off/unplugged and turn back on put the same problem.theres defo signal there as i can ONLY get channel 5 on the ATV setting..any help


... Flat Panel Televisions

Subtitles Cant get rid of subtitles, tried everything, always comes back on after changing channels, and also when re tuning channels the do not come back in order i.e. 1,2,3,4 etc I think it needs re programming?? Is this possible?


This feature is often called closed captions and is located BOTH in the menu of the set---set it off or to something other than cc1. And be aware most boxes (cable-satellite etch) have the exact same feature--You have to look in the menus of ... Flat Panel Televisions

Hi, i have an LG 42LH5000 which is about 18 months old. Recently I lost all of my digital tv channels, each one said no signal. I re-scanned the channels and got most of them back, however the following channels will not be detected ni matter what I do, ITV, Channel 4, Channel 5, ITV 2, Dave Ja Vu, E4 and E4+1. I thought it might be the antenna but my flat mate uses the same roof antenna as me and he receives all of these channels fine. I've tried unplugging it from the mains power and also perf


... LG Flat Panel Televisions

I have another problem with my 55HDs69 plasma TV. I did a channel scan and brought up all the channels but when I click on channel 52 which is my fox news channel the TV goes to channel 69. I have tri


... Hitachi 55HDS69 55 in. Plasma Television

We have a dion set top box DTR250SS10 which worked fine when 1st installed. Couple of days later the signal has gone and when we try to retune it it says No Carriers found ! and has no signal. If we plug the ariel back into the tv then all the digital channels are there so we do have signal


... Flat Panel Televisions

I bought a TOSHIBA 32KV500B tv. At the Initial Installation mistakenly I selected "yes" for 'do you want to search analogue channels?' guestion. And then I lost all my automatically selected digital channels and I cannot go back to retune the channels. I have no SETUP in the main menu and then no INSTALLATION option. I have 6 main thing: picture, sound, feature, install, program table, Source: tv. I have tried to use the APS but this one retunes the analoge chanells only. Please help me how I c


I had this problem and searched the internet for hours looking for an answer and was given the initial same reply as this and it does not work. To solve this problem all you simply need to do is press source button on the controller followed by press ... Toshiba Flat Panel Televisions

I have a samsung ue40es6800 tv when switching from 3d back to normal 2d (3d off) the picture goes very dark with a strong red hue with a hint of blue. if u switch back to 3d, picture is displayed correctly again. You have to switch the tv into standby then turn back on and picture is normal no problems it only happens when exiting from 3d, changing channels once exited from 3d doesn't correct it.


... Samsung Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1526 seconds