Having problems with your Flat Panel Televisions ?

AKAI PDP4206em fuse blown on zsus board, replaced fuse and turned tv on, there were sparks on the zsus board, I unpluged tv and pulled out the zsus board,,, i dont see any damage on this board, is this board fixable? or do i have to replace it?? if so were can i find one?

Answers :

You will have to replace it. The reason the fuse is blowing can also be to X-sus board as the two sustain boards are capable of frying each other. They cost you about 170$ together. If you can get me the part numbers off the boards, along with any revision versions, I can find you the replacements.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

AKAI PDP4206em fuse blown on zsus board, replaced fuse and turned tv on, there were sparks on the zsus board, I unpluged tv and pulled out the zsus board,,, i dont see any damage on this board, is this board fixable? or do i have to replace it?? if so were can i find one?

You will have to replace it. The reason the fuse is blowing can also be to X-sus board as the two sustain boards are capable of frying each other. They cost you about 170$ together. If you can get me the part numbers off the boards, along with any re ... Flat Panel Televisions

Viewsonic n4060w black screen, no video sound ok. So I've been reading this forum about the problems others have faced with this tv. I decided to purchase pair of inverter boards. After installing them the same problem, no difference. I swap the boards to see if I can find a defective one, nothing. I can see the black backlight on, I have replaced caps on the psw before. Can I suspect the psu once again or am I missing something?

... Flat Panel Televisions

I have a HLR5656W Samsung. This question was asked before, but I never saw an answer. I have the same issue. "I have tried two different devices on the hdmi input and neither work. I am trying to find the part number for the circuit board that contains the hdmi input. Since I see no way to resolder or repair the connection I assume the board needs to be replaced? I was unable to get a part number over the phone. I was hoping to avoid taking the tv apart to get the board out and find the number

You need the service manual and you need to look at the exploded view to identify the board next\012go to the parts list if the part number isn't in the exploded view. ... Samsung HCM5525W 55" Rear Projection Television

Would i have to replace both sdr boards if only one is damaged

There is no harm in trying. ... Hitachi Ultravision P50S601 50 in. Plasma HDTV

Black screen I have a Samsung un46d8000 flat screen TV which is about 8 months old. It has so far worked without problems but yesterday when switching on there is just a black screen. Sound from all inputs is fine and it looks like that there are 4 small lights in the back that you can see glowing through the screen. Its still under warranty if I can find the receipt!! If I dont find the receipt any ideas? I did have a peek in the back and there looks to be one big board that drives the Screen.

You are on the right track suspecting a power supply problem. If you are tehnically inclined you might be able to repair your TV, especially if a board swap seems feasible. As always you have to dtermine the cost of repairs vs replacement ... Samsung Flat Panel Televisions

AQUOS LC-46E77UN I am trying to trouble shoot my tv and thanks to all the people on this site, I have come a long ways. In talking to one person, they had thought that one or both of the inverters were bad, the problem is that the display stays dark, So I replaced both the Master and Slave Inverter boards only to have the same result no display or sound. If I hold my LED flashlight up to the display, I can see the SNOW in the background from no input, so I don't believe that the display is b

Contact the authorized service center for Sharp at your town. Never make it irreparable please. ... Sharp AQUOS LC-46E77UN 46 in. LCD HDTV

My Vizio plasma vp422 made a loud pop and went off. Now it won't come back on. U can turn on and the vizio display turns from orange to white but nothing else. Also u can see the little green light in the back is burning. I have removed the back and don't see any visible damage such as blown capacitors. Also I checked the 4 little white fuses and their is continuity running through them. I don't really know where to start looking next. Would it be one of the boards? Is there any way of checking

You need to get a service manual (good luck) or begin by testing all the marked voltages out of the power supply board at TURN ON.do any come up and instantly go to zero or very low? That is a clue where you would have to follow up. ... Vizio Standard (CRT) Televisions

Picture with no sound on Samsung LNS-4692DX. Samsung was of NO help. I followed the excellent instructions posted by fun2 and Ida2 but I did not prepoerly remove one of two orange ribbons on the T-Conn board and when I installed the new Tconn, the right half side of the screen has a green tint that distorts the picture badly. The left side is fine. My questions is does anyone know if I need a new orange ribbon and if so, how do I replace the old one at both ends? Otherwise, is the ribbon fixable

... Samsung LN-S4692D 46 in. LCD HDTV

Hello, i have a Mitsubishi TV Model: VS-50607, serial #1255456. It doesnt turn ON. I Took it to the Shop and they tell me that the TV's main board is damaged and needs to be replaced. I live in Costa Rica and its been impossible to find it in the local market. Do you have it or can find it for me? How much it cost? can you deliver it to my fowarder in Miami? Any help will be hightly apreciate! Thanks, Enmanuel Jimenez

930B856003 is the original part number and can be found here:\015\012\015\012http://www.moduslinkptstvboards.com/Pr ... Mitsubishi VS-50607 50" Rear Projection Television

Hello, I have a vizio p50hdtv20a the problem is I have horizontal black lines going all the way acrros the screen and some colored vertical lines. I have replaced the y buffer boards and the zsus boards with no effect. I fix electronic on a daily basis but this one has me stumped open to any ideas please help. Thanks

X board or matrix? board 1st kontroled the cables ... Vizio P50HDTV20A 50 in. Plasma HDTV

I've a LG 32LC56 that suddenly becomes black screen while i was watching it. Since then, i was never able to get any picture on screen, even the menu picture. Sometimes, when I switch it on, i see some colored lines on the upper left screen part, but never a menu. I've replaced the main board by a new one, the problem is still the same. May i try to change the screendriver board?

Learn about T-CON board: \012http://www.scribd.com/doc/25276757/E40951307-TCON-Troubleshooting-10-22-09-OPT ... Flat Panel Televisions

Ilo ltc32ha36 tv power supply board MLT169B rev 1.1 ( must be this board and rev) Need the value or color bands for R68 (between x-former and heat sink by C18 and D14) I can barely see the colors on mine( possible heat damage) . It wont power up cold and i have already replaced the caps and found C18 open and R12 and R13(bottom side) got very hot. I am not sure if D14 or R68 are bad Thank you

... iLO LCT32HA36 Television

I have a Sony KDL-46S4100 LCD that was given to me that doesn't work. It powers on and the power LED is green and the backlight to the tv works and stays on as well but I get no picture or on screen display such as the menu. I can hear sound from the speakers when the input is set to the correct one. I purchased a replacement T-CON board but the problem persists. If I do the LVDS cable wiggle test I can see noise come up on the panel. It varies from vertical lines of different colors to whe

... Sony KDL-46S4100 46 in. LCD TV

Comment: Hello I have a vizio vp504fhdtv10a, and the screen has a 3 inch wide vertical black bar on the middle of the screen. You can kinda see through that section the interior. My question is this tv repairable by replacing a board inside or not fixable?

... Flat Panel Televisions

Tv capacitor i need to find a replacement capacitor for my tv control board. i have the smaller capacitors but i need the large one that rarely goes bad but lucky me i need it. here is a full description. its made by CapXon 150uf 450volt GL105c temp. rateing. other markings are C628 VENT. the measurements are as follows. length is 1.625 inches or 41.27 MM. X diameter is 0.75 inches or 19.05MM. standard measurements are length1.5/8 inch X diameter 3/4 inches. i used online conversion tabl

... Flat Panel Televisions

I have replaced my lamp in my DLP model WD-62526 Mitsibishi but the screen is dark, so dark that I have to watch it with teh light off. But the funny thing is it isn't as dark as it was when it went though. I hav eremoved the back to search for the ballast but I couldn't find it. I think I would have to remove some more components of the Tv to see where it is. Could it be possible that one of the fuses could of went in the tv which is causing the tv to be dark. Also the HDMI doesn't work either.

... Mitsubishi WD-62526 Projection TV

Some plz help me. My 42inch jvc lcd screen was damaged while moving where can i find one for parts and replace ours for less?.....S.O.S

If screen damaged/cracked etc you are finished--cost of entire panel unit exceeds cost of set. ... JVC Flat Panel Televisions

In my tv is 10 years old and by the 2007 we replaced with new board(Only the CRT is the old one). Last day I was switched on my tv only sound only came and no picture. I can able to see the menu setting in TV live volume increase and decrease, Chanel nos etc. When I remove the external cable connection the display comes like blue screen(looks like the CRT is ok). When I inserted the cable the blue screen goes off and became black color during that time the audio of the tv is good. Pls help to s

Hello\015\012Your TV is fitted with Toshiba kit I understands from your description. There is a sub-brightness contorl on board [a small preset resistor, which can be adjusted with a small screwdriver] fitted near to the LOT and towards its le ... Flat Panel Televisions

Tv I need to find a replacement board where can I get one asap

Depends on brand, model number and a part number. ... Flat Panel Televisions

I have a Samsung PS50Q97HD plasma TV that keeps blowing new boards and I don't know why. It came to me with a faulty YSUS that had damaged the VS supply section in the PSU board. I fixed the PSU and fuse and have good VS voltage now. I replaced the YSUS main. I powerd the TV and the upper YDRIVE (Yscan buffer) board chips when pop. I put this down to it getting damaged unseen when the YSUS went faulty. I replaced the YDRIVE upper with new and then the lower board went faulty too (holes blew in t

... Samsung Flat Panel Televisions

Hello, i have a samsung 42' plasma tv model #pn42c450b1d. the tv doesn't want to turn on. i plug it in and you hear a clicking noise se a red power light. also when you press the power button on the tv in the back u see a green light come on for a second on one of the circuit bords( the one under the power board) and simutanously you see a red light come on and and off at the same time on the circiut board with the av, hdmi, inputs. i looked and thier doesn't seem to be any bulging capaciters. a

Hi.As you know the TV is in protect mode because an internal fault has been detected. I think that you already tried leaving power cable disconnected for ten minutes. After connecting back restart the TV with no device attache ... Flat Panel Televisions

My 32 inch lg 7000 screen has broke and i cant find a replacement one anywhere?

If lcd so contact service center or" crt tube so mach only size then connect pin mach on the old crt. ... LG Flat Panel Televisions

Lightning strike hit TV coax cable, hdmi 1 in kdl-40v3000 damaged, can circuit board be replaced

... Sony BRAVIA KDL-40V3000 Television

Hi, I have searched all over internet and I think you are the only one who may exactly know whats the problem. I have a Toshiba Regza 37" which has no picture but sounds works perfect. The thing is if you really focus the picture is there but its too dull and dark to see it properly. Ive heard something about switching T-Con board.. please let me know which one of the boards is that(any sign or specific connection?) and where can I buy one? Thank you very much and best regards kamran

If you can see an image and it's OK - no distortions or corruption - then it's not an image problem, it's a backlighting problem. This means that the faulty part is not the T-con or any other board that works on the image, it's the inverter - the bo ... Flat Panel Televisions

Main Board? Had issues for years, where I had to unplug once in order to get the tv to turn on. Then one day, it would not turn on. The TV shows a quick lightening of the screen like it is going to turn on, but nothing appears. It also clicks once or twice. Took to a repair shop and they diagnosed with main board failure and refused to fix due to lack of parts. Do you think it is the main board and where would I find one? I am pretty handy, do you think I could DIYthis job?

The fault must be due to a main board fault. Generally, it will be impossible to get this board repaired. A replacement must be done. Most of the parts in this board are not available by local electronic spare part market. After power ON, there sh ... Proscan 47LB45H 47 in. LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1771 seconds