Having problems with your Flat Panel Televisions ?

Iv tuned in a new dgital tv, but channel 1 and 2 dont tune it, programs start a 3, if u go backwards, its channel 805 i think press the remote button to analauge and u get channel 1 and 2 but not good pictures



Answers :

If you've got a digital box from your cable provider, your tv most likely needs to be on channel 3. At that point you would use the remote that came with the digital box to change the channel. (in other words, your tv would always stay on channel 3)

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Iv tuned in a new dgital tv, but channel 1 and 2 dont tune it, programs start a 3, if u go backwards, its channel 805 i think press the remote button to analauge and u get channel 1 and 2 but not good pictures


If you've got a digital box from your cable provider, your tv most likely needs to be on channel 3. At that point you would use the remote that came with the digital box to change the channel. (in other words, your tv would always stay on channel 3 ... Flat Panel Televisions

Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,


Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ... Vizio VT470M 47 in. TV

I purchased a Toshiba LCD TV/DVD 22 DV500B for our great grand daughter in setting it up, I went through the auto set up, then it asked annolog yes or no I pressed yes thinking I would get a few extra annolog channels for her, all I ended up with was 4 good annolog channels and one not so good. To retune the manual states. Press MENU on the remote. Select SETUP and then INSTALLATION. I press menu but only get picture/sound quality changes. 6 different areas of change but no SETUP


Hey, i had this exact problem, made the same mistake with selecting yes. Worked out the solution is to press the source button, then scroll down one to DTV/USB, and this will be the free view. Hope it helps, Ben ... Toshiba Flat Panel Televisions

I can only change channels using the up & down keys on the remote button. But if i press the channel number, eg. Channel 17, if i press 1 and 7 on the remote button, it will not change channels. O


U have to press the enter button after entering the channel number ... Standard (CRT) Televisions

My technika tv does a very similar thing. Black screen until I press the display button on the remote control. The picture comes on fine for a second then goes black again. Think my kids have pressed


... Flat Panel Televisions

I have a Phillips TV model 32HFL586OD and when I connect the cable to it Idont see any pictures but when I press the menu button on remote I see the menu and channels and everything that pops up but I dont see and picture or anything when I connect my cable or xbox can someone help me


... Flat Panel Televisions

The TV remote doesn't work at all (not even the on/off button). I have even changed the batteries. The cable remote works partially. I can change channels with it but I cannot change the volume. The mute button doesn't work either, nor the TV on/off button. I can turn on/off the tv from the tv's own power button but when I press either the up or down volume button of the TV (not the remote) or the up or down channel button on the tv I getthe "Video Selection" window. The main problem, it seems,


The problem does not seem to be that of the remote more so coz the front panel controls are not working either. I really believe that this is an issue related to faulty microprocessor circuits which means that we have to replace the main A/V board to ... Toshiba REGZA 42 in. Flat-Panel LCD HDTV

Ok my remote is working but the screen will not move I can press the buttons on the remote and the light blinks but it will not move to the channels It just goes to my channels but when I press Ok


... Flat Panel Televisions

I have a 42lg2000 , and all has bin good for 2 an a half years , went to switch on today and standby light now flashes twice before turning blue and have no picture or sound , blue light flashes when buttons are pressed on remote but nothing happens , please help :-)


... Flat Panel Televisions

My sharp tv picture is frozen with no sound. Channel changer works. wrong button was pressed on remote.


Try resetting your TV ... Sharp LC-32SB24U 32 in. LCD TV

I programmed my sudden link remote to my tv and turns my tv on an off, controls the volume, but when I try to change the channel of my television with the remote, the red cable light on the remote lights up as if it thinks I'm trying to tell it to change the channel on the sudden link channels and not the channels of my tv....help? (I know this sounds lazy because normally people would just say get up and change the channel but our tv buttons don't work and I don't have the original remote)


... Flat Panel Televisions

I Lost picture. Went to press mute button on remote and pressed last button instead. Now i can't get picture back.


If you hit the "last" button again, it should take you back to the channel you were on before you hit the button. when you lost the picture, was the screen blue? black? If you hit the "menu" button, does the menu come up? ... Vizio VW37L 37 in. LCD HDTV

My Sanyo AVL 209 t.v. is only working on one channel. It shows the channel at the top but if I try to chage it stays on the same channel but goes fuzzy. This all started with a broken remote. I am now ttrying to do in by the t.v buttons. I think Source is the problem. I put t.v. as the source but think I have the wrong input. How do I change it. I am connected to a HD box and am totally confused. I have tried unplugging for an hour. No luck . Unable to change to another channel.


... Sanyo AVL-209 LCD TV monitor power supply ac adapter cord charger

I was watching T.V. and when I went to change the channel, the remote control wouldn't respond. I changed the batteries (generic) & the new ones didn't make the remote work either. I hit the power button on the T.V. and it did turn the T.V. on & off & changed the channels. I think the bulb or the eye on the remote is the problem. I can't remember ever seeing the bulb actually lit up. It is dark, so it seems it would be red. It's an old T>V> & remote, but has always worked. HELP PLEASE.


You won't be able to see the light from remote's LED (Light Emitting Diode) because it is IR (Infra Red) which is invisible to the human eye.\015\012\015\012Try re-entering the code for your tv to see if it works.\015\012\015\ ... Flat Panel Televisions

Tv will not turn off with remote or button on tv itself. Remote will change channels and volume but will not shut it off. With remote hitting off button kills sound but picture stays on


My sharp does the same thing. Cable box needs to be turned off for tv to turn off ... Fisher PC-25R20 25" TV

I have Aiwa TV MODEL No. TV-A209 The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control. Its stuck randomly on a particular channel that I was watching at that point of time. Along with that channel it now shows a message in flashing red color that reads :- AGING 0211H Now when I press ''Display'' button on remote control volume goes off and this code is shown :- S123 K234 Y 000 001 1


... Flat Panel Televisions

Picture I was litening to music threw direct box,vacumming,different outlet then tv. turned it off,& used converter box buttons to change channel. got no pic no sound. pushed more buttons,turned it off, then on hit reset, pulled card out put it back,then turned around to get remote, and saw my 82 yr. old dad holding remote as far out as he could,as if he was trying to get around me! I asked him what button he pushed & he said none. now we have sound no pic. it turns on deep blue screen no menu


I assumes that there is a confused memory IC inside, due to improper data inputs. Try a hard reset to this set. Unplug it from AC mains wall socket, and re-plug it back after 10 minutes of so. This must make it a hard reset. If it do not help you ... Samsung 50 in. Plasma TV

I have a 19 inch toshiba tv 19A21 but no remote for it. I'm trying to hook up a dvd player to it to play through the tv. All the cables are set up correctly, but I can't find the input channel on the tv that will let me play it. I read the manual for this tv and it says you use the remote to access the input screen, but I do not have a remote. Is there a way to do it through the buttons on the tv? Pressing the volume buttons at the same time got me to a menu screen but I didn't see an optio


Most analog tv,u just reqiure pushing the tv manual button channel up a few times,tv will go into video modes like 1 or 2 for play video devices.If this doen't work,try website like Remotes.com to buy an original remote. ... Toshiba 19A21 19" TV

I have a Verizon (Frontier) FIOS set top box model HD QIP 7100 1 and an LG TV model 42LD520. The power button on the remote control for the set top box does not turn off the set top box AND the TV simultaneously. The circumvention is to press the TV button and then the power button to turn the TV off separately. I'm thinking that the code for the TV is not programmed into the remote correctly. I've tried 1292, 0205, 0727, 0883, and 1205.


... LG 42LD520 42 in. HD-Ready LCD TV

TV was on but picture wasn't as clear. I pressed the "device" button and the TV immediately went to snow. Now I don't get a response with pressing any buttons on the remote or any buttons on the TV. HELP!


Try the soft reset, with set on and original remote hit 1,2,3 enter, some versions require menu first.let me know if it helps.The set also has a hard reset but only as a last resort.SD TECH ... Mitsubishi WD-73927 73" HDTV

No picture Picture instantly gone when accidentally pressing two or more remote buttons simultaneously. Screen does display remote commands but there is no indication of a broadcast signal. TV is hooked up to cable. Cable service is normal on another set.


Tried to reset the tv. ... Standard (CRT) Televisions

My LG TV doesnt respond to remote control. it works when i operate it manually but as soon as i press any button on the remote, the channels keep running on their own. none of the buttons appear stuck.


First thing I would suggest is have the remote tested--understand the remote and the buttons on the set go to same place--buttons have priority-A remote can be tested--most testers you point the remote at and press any button and the tester f ... LG 42LC2D 42 in. LCD HDTV

My name is Rich. I purchased the vizio m220nv . Just got the tv today. went thru set up and searched for channels no problem. When I press the menu button on the remote nothing happens. when I press the VIA button the apps don't show up. I even thought it might be a weak internet signal and ran an ethernet cable directly to the tv.


... Vizio M220NV 22 in. LCD TV

Well here is the problem I have Hitachi rear projection TV model # 50EX12BA V5K02256 the TV turns on and changes channels. When I go to the menu items (to program the channels for example) via the remote. None of the menu options work. the remote works I can scroll to and select an option and press the enter button (as per the manual instructions) but nothing happens. Is there a way to do a hard reset to return the tv back to factory settings?


Looking for a RF in cable for model 50EX12BA ... Hitachi 57F500 57" Rear Projection HDTV-Ready Television

I have connected an Explorer 4200HD converter box to a Sharp LC-46D92u using Pr/Pb/Y and red/white audio cables. i have the tv channel on 3 and i am not getting a picture or sound. i do get the channel info when I hit the "Info" button on the Cablevision remote, but no picture or sound. What am I doing wrong?


Hello\015\012You have now connected your TV with your converter box as component video and AV. Now your TV is only the monitor for your converter box. You ahve to select the input selection on the TV to select the input as component video as ... Sharp AQUOS LC-42D85U 42 in. LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1820 seconds